Search results
1301
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+2Ko
MEC 240k- S20+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow the test specimen…
1302
Accessory
FINAT 9 Loop-Tack Test Fixture (lower), 200 N, QC-20
PDV13016-A
The FINAT 9 Loop Tack Test Fixture (lower) is fitted to the anvil plate of a motorised test stand.
It comprises a dedicated holder for 25mm x 75mm float glass onto which the adhesive-coated test strip is fixed according to the requirements of the FINAT…
1303
Accessory
Large Chain Link Assembly (short), 2.5 kN, 5-16 UNC
PSV8057
The Large Chain Link Assembly (short length) is fitted with a 5-16 UNC female thread and supplied with a male grub-screw.
It is fixed to other grips thereby allowing a flexible connection, which is often used for providing alignment when pulling large…
1304
Accessory
Heavy-duty Vice Grip - Single Action, 10 kN, QC-20 fitting
Mec154-10
MEC 154-10 (body only - aluminium):
A Single-action Heavy-duty Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place…
1305
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+2Ko
MEC 240k- S50+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
1306
Accessory
Heavy-duty Belt Grips, 10 kN, QC-20 fitting
432-277
Heavy-duty Belt Grips are designed for tensile testing of high strength belts and straps such as conveyor belts, which require special grips to prevent specimen slippage.
By winding the belt around the split bodies the stresses in the sample are…
1307
Accessory
Diamond-coated Inset jaws, 0.5 set
Mec9-EBD
MEC9-EBD Diamond Jaws
Diamond-coated Inset jaws of 37 mm height x 15 mm width, 0.5 set. For fitting into the carrier of the MEC9 Thin Wire Grip.
Used when jaws need to bite into a soft material to clamp tightly and reduce the risk of slippage.(e.g. soft…
1308
Accessory
Inverted Chisel Point - Ø 8 mm, 500 N, 10-32 UNF
432-356
For compression testing of cylindrical or wire specimens up to 500 N.
Specimen is located centrally within the inverted V-shape and compressed to a set distance or a break.
Fitted with a 10-32 UNF female thread for connection to loadcell
1309
Accessory
Assisted Pull-Peel Table 90 Degree, 500 N
432-051
The Assisted Pull-Peel table is fitted to the anvil plate of a motorised test stand and then connected to the crosshead of a test stand. It is commonly used for conducting peel tests on adhesive tapes and films.
The carriage of the peel table is directly…
1310
Accessory
Clevis Grip (Large), 2.5 kN, 5-16 UNC
432-400
Large Clevis Grip fitted with female 5-16 UNC thread and supplied with male grub-screw.
Used for testing heavy duty tension springs or for securing odd-shaped parts up to 2.5 kN capacity.
1311
Accessory
Heavy-duty Textile Grip, 50 kN, QC-32 fitting
432-434
Heavy-duty Textile Grips are designed for tensile testing of high strength fabrics, textiles and webbing, which require special grips to prevent specimen slippage.
By winding the belt around the split bodies the stresses in the sample are distributed,…
1312
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+Ko
MEC 240k +kO (body only) :
A pair of pneumatically-operated, Single-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
1313
Case study
Testeur de traction sur aimant
Exigence
Les séparateurs magnétiques emprisonnent et éliminent les corps étrangers ferromagnétiques des flux de produits, afin de garantir une qualité de produit élevée et d'éviter d'endommager les machines et les équipements de traitement.
1314
Case study
Essais de flexion et de pelage à grande échelle sur bois pour meubles et sols
Exigence
Klaipedos Mediena basée en Lituanie est un important fabricant de meubles en bois.
1315
Case study
Headset microphone joint torque
Requirement
Jabra is a subsidiary of GN Netcom and is a global manufacturer of innovative headsets (wireless and corded) and speakerphone solutions.
1316
Case study
Test de la Résistance par Compression Verticale (RCV) d'une bouteille en plastique
Exigence
Silgan Plastics est une société américaine qui fournit des emballages pour les soins personnels, domestiques et automobiles. industrie pharmaceutique et alimentaire depuis plus de 50 ans.
1317
[Page extract]
Systèmes de couple contrôlés par logiciel
Performance sophistiquée - facile à utiliser
Vous recherchez un système d'essais de mesure de couple automatisé pour améliorer la précision et la répétabilité de vos mesures par rapp
1318
[Page extract]
Introduction to climbing drum peel testing
Climbing drum peel testing is a specialised method used to measure the adhesive strength between bonded materials, particularly in flexible-to-rigid substrate combinations such as aluminium skins bonded to honeycomb cores.
1319
[Page extract]
Measuring compressive modulus
Common testing methods
Internationally recognised standards specify how compressive modulus is measured for different material types and applications:
1320
[Page extract]
Tools (calibration related)
To maintain consistent performance and accuracy, tools must be checked regularly.
1321
[Page extract]
Step-by-step needle penetration testing process
Sample preparation
Specimens are cut to the required dimensions and conditioned to the specified environmental parameters such as temperature and humidity. Thickness and surface finish are controlled for consistency.
1322
[Page extract]
Introduction to secant modulus
In material testing and engineering, understanding how a material responds to applied stress is essential for predicting performance, ensuring safety, and optimising design.
1323
[Page extract]
FAQs about Young's modulus testing
What is the difference between Young’s modulus and tensile strength?
Young’s modulus measures stiffness - how much a material deforms under stress.
1324
[Page extract]
Introduction to the ring crush test
The ring crush test (RCT) is a key method for determining the edgewise compression strength of paper and paperboard.
1325
[Page extract]
Types of flexure tests
Different flexure testing setups are chosen based on the nature of the material, the required precision, and the industry standards being followed.