Search results
2551
Caso de estudio
Prueba de solenoide
Requisito Parmeko es un diseñador y fabricante con sede en Leicester de solenoides proporcionales, solenoides de encendido e imanes de retención utilizados en aplicaciones de energía de fluidos móviles e industriales, así como una gama de sol
2552
[Page extract]
Benefits and challenges
Benefits
Confirms materials meet design specifications
Ensures batch consistency in manufacturing
Identifies materials capable of maintaining performance throughout their service life
Challenges
2553
[Page extract]
Dinamómetros mecánicos
Los dinamómetros mecánicos son instrumentos basados en muelles que cuentan con una aguja en un dial.
2554
[Page extract]
BS EN ISO 16409
Describes performance criteria for manual interdental brushes with a round cross-section of the brush head and consisting of a wired stem with inserted filaents.
Of particular interest is the Stem Retention Force (sections 5.4 and 7.6)
2555
[Page extract]
BS EN ISO 4074
BS EN ISO 4074:2002 specifies the minimum requirements and the test methods to be used for condoms made from natural rubber latex which are supplied to consumers for contraceptive purposes and to assist in the prevention of sexually transmitted infectio
2556
[Page extract]
BS EN ISO 9001
ISO 9001 has been revised to reflect the many changes in the way we now do business – new technology, greater access to information, higher customer expectations, globalization and increasing importance of service industries.
2557
[Page extract]
ASTM D3916
ASTM D3916 is a test method for determining the tensile properties of pultruded, glass-fiber-reinforced thermosetting plastic rod of diameters ranging from 3.2 mm to 25.4 mm.
2558
[Page extract]
ASTM D4501-01
This test method describes a procedure and fixture used to determine shear strengths of adhesives used to bond materials with moduli higher than the modulus of the adhesive.
2560
Caso de estudio
Prueba rotativa de gorra deportiva ISBT
Requisito La Sociedad Internacional de Tecnólogos de Bebidas (ISBT) publica códigos de práctica voluntarios para los aspectos técnicos y científicos de los refrescos y bebidas.
2561
[Page extract]
SAE J174M
This test procedure is intended to provide a quality control method for checking torque-tension characteristics of non-prevailing torque type threaded steel fasteners 6 through 24 mm nominal diameters.
2562
[Page extract]
BS EN ISO 13934-2
Part 2 of ISO 13934-2 specifies a procedure for the determination of the maximum force of textile fabrics known as the grab test.
2563
[Page extract]
Vice grip (Mechanical)
Vice grips (single-action) - having one fixed jaw against which a second parallel jaw is tightened. The position of the fixed face may be adjustable to accommodate differing specimen thickness.
2564
Caso de estudio
Control neumático de carga superior para la prueba de torque de la tapa CRC
Ejemplo de ingeniería personalizada La prueba de torque de las tapas de botellas a prueba de niños requiere la aplicación de una carga superior simultánea.
2565
[Page extract]
BS EN 50289-3-4
Communication cables, Electric cables, Communication transmission lines, Mechanical testing, Tensile strength, Tensile testing, Elongation, Shrinkage, Shrinkage tests, Electrical insulating materials, Sheathed cables, Insulated cables, Cable sheaths
2566
[Page extract]
ASTM D3470
This test method covers the determination of the force required to cause a downward-force-while-turning lug-finish closure to be rotated across the container finish lugs (strippage) without downward force being applied to the closure (Type IIA closures)
2567
[Page extract]
ISO 9664
The principle of the method specified is cyclically stressing the specimen in a way that may be regarded as the superposition of an alternating stress on a static stress which is the mean stress.
2568
[Page extract]
ISO 34-2
ISO 34-2 specifies a method for the determination of the tear strength of small test pieces (Delft test pieces) of vulcanized or thermoplastic rubber.
2569
Caso de estudio
Pruebas de penetración semiautomáticas en placas de yeso
Ejemplo de ingeniería personalizada British Gypsum (ahora Saint-Gobain) realiza pruebas repetitivas de penetración para evaluar con precisión el rendimiento y la durabilidad de sus productos.
2570
[Page extract]
ASTM D7617/D7617M-11
This test method specifies the test requirements for (FRP) composite smooth round rods and textured bars for determining the transverse shear strength via a double shear fixture.
2571
[Page extract]
ISO 8009
ISO 8009:2004 specifies the minimum requirements and test methods to be used for reusable diaphragms made from natural rubber and silicone rubber. These diaphragms are intended for contraceptive use.
2572
[Page extract]
ISO 2555
Specification of a method for determining an apparent viscosity of resins in a liquid state, using one of the types of rotational viskosimeter described in this standard.
2573
[Page extract]
BS EN 12814-7
BS EN 12814-7 is a tensile test method with waisted test specimens for testing welded joints of thermoplastics semi-finished products.
2574
Caso de estudio
Probador de extracción de imanes
Requisito Los separadores magnéticos atrapan y eliminan cuerpos extraños ferromagnéticos de las corrientes de productos, para garantizar una alta calidad del producto y evitar daños a la maquinaria y al equipo de procesamiento.
2575
[Page extract]
ASTM D5528-13
ASTM D5528 is a test method, which determines the opening Mode I interlaminar fracture toughness of continuous fiber-reinforced composite materials. It uses a a double cantilever beam (DCB) specimen. Susceptibility to delamination is one of the major