Search results
1226
[Page extract]
BS EN ISO 80369-20
These standards describes the methods for testing the performance of 6% Luer lock fittings including assembly, leak tightness, stress cracking, and separation force.
1227
Accesorio
Lower Key-operated Chuck, small, round shaft, fits Vortex spindle
432-496
Lower ‘key-operated’ 4-jaw Chuck (small)
Fitted with a round shaft for connection to the motor spindle of 'Vortex' motorised test stands. Supplied with 3 different sets of interchangeable jaws. Max.opening 50mm depending on jaws selected.
Used for…
1228
Event
Cap Closure and Removal Torque Testing
The primary objective for measuring and analyzing the torque characteristics of a container cap is to accurately determine not only the quality of the part or process, but also the root cause of a wide variety of defects.
1229
[Page extract]
ISO 283
ISO 283 specifies a test method for the determination of the full thickness tensile strength in the longitudinal direction and the elongation at the reference force and breaking point of conveyor belts having a textile carcass.
1230
Event
Wine & Spirits Capping: Cork Pull & Twist Caps
Wine packaging has a great influence on the quality of the product delivered to the customer.
1231
Accesorio
Flat Crush Test Upper and Lower Plates with Modified Anvil Plate and Self-Adjusting Adapter
PDV11089
A number of test methods and standards employed by various industry bodies call upon specific crush fixtures and associated accessories to be used in conjunction with a compression tester. The Flat Crush Test fixtures support the test piece on the lower…
1232
Event
Wine & Spirits Capping: Cork Pull & Twist Caps
Wine packaging has a great influence on the quality of the product delivered to the customer.
1234
Accesorio
Lever-operated Cam Grip (large serrated), 500 N, 10-32 UNF
432-047
The Large Lever-operated Cam Grip is fitted with a 10-32 UNF female thread and supplied with a male grub-screw. It is designed with a plated 70mm wide roller cam to self-tighten as a load is applied to a sample, spreading the load evenly. The lever also…
1235
Accesorio
Compression Plate - Aluminium, 10 kN, 156 mm, QC-32 fitting
Mec23-156-32-AL
MEC23-156-32-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
156mm diameter.
Fitted with the QC-32mm female…
1236
Accesorio
Compression Plate - Aluminium, 10 kN, 246 mm, QC-32 fitting
Mec23-246-32-AL
MEC23-246-32-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
246mm diameter.
Fitted with the QC-32mm female…
1237
Accesorio
Compression Plate - Aluminium, 10 kN, 56 mm, QC-20 fitting
Mec23-56-20-AL
MEC23-56-20-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
56mm diameter.
Fitted with the QC-20mm female connection…
1238
Accesorio
Compression Plate - Aluminium, 10 kN, 196 mm, QC-32 fitting
Mec23-196-32-AL
MEC23-196-32-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
196mm diameter.
Fitted with the QC-32mm female…
1239
Accesorio
Compression Plate - Aluminium, 10 kN, 296 mm, QC-32 fitting
Mec23-296-32-AL
MEC23-296-32-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
296mm diameter.
Fitted with the QC-32mm female…
1240
Accesorio
16 mm Crosshead Extension
432-307
The 16mm dovetailed crosshead-extension allows the loadcell on a single-column MultiTest stand to be positioned further from the column to accommodate larger test samples or deeper grips.
Load rating of test stand is reduced by 25%.
1241
Accesorio
50 kN Wedge Grip, QC-32 fitting
Mec243-50
MEC 243-50 Wedge Grip (body only):
A multipurpose self-tightening Wedge Grip with a lever arm for rapidly securing and releasing the specimen when testing.
Rated to 50 kN in tension with an opening of 0-16mm depending on the jaw types selected (sold…
1242
[Page extract]
ASTM D953-18
ASTM D953 is a test method that covers the determination of the pin-bearing strength of rigid plastics in either sheet form, molded form, or in reinforced thermoset form.
1243
Accesorio
Compression Plate, Self-levelling, Hardened & Ground, 175 mm, 5-16 UNC
432-352
Self-levelling compression plates are ideal for general compression testing on a range of materials and finished products. Self-levelling allows parallelism to be set for those applications where it is critical to accurately measure the deformation of a…
1244
Accesorio
Compression Plate - Aluminium, 10 kN, 96 mm, QC-32 fitting
Mec23-96-32-AL
MEC23-96-32-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
96mm diameter.
Fitted with the QC-32mm female connection…
1245
Event
Cap Closure and Removal Torque Testing
The primary objective for measuring and analyzing the torque characteristics of a container cap is to accurately determine not only the quality of the part or process, but also the root cause of a wide variety of defects.
1246
Accesorio
20 kN Wedge Grip, QC-20 fitting
Mec243-20
MEC 243-20 Wedge Grip (body only):
A multipurpose self-tightening Wedge Grip with a lever arm for rapidly securing and releasing the specimen when testing.
Rated to 20 kN in tension with an opening of 0-16mm depending on the jaw types selected (sold…
1247
Producto
Probador de tracción manual
Alluris FMT-W30
PSV21019
El FMT-W30 es un probador de tracción manual disponible en 2 modelos con una capacidad de resistencia a la tracción de hasta 500N (110 lbf) o 1000N (220 lbf). Compacto y resistente, está diseñado específicamente para facilitar su uso con una formación…
1248
[Page extract]
Performing the flat crush test
A standard flat crush test includes the following stages:
1249
[Page extract]
Performing the edge crush test
Sample preparation
Cut specimens to standard dimensions with clean, parallel edges.
Condition samples in a controlled temperature and humidity environment to ensure consistent moisture content.
Wax edges if required
1250
Producto
Probador de torque automatizado
Vortex-i
876-009
El Vortex-i es un probador de par de alta gama controlado por software que se ejecuta en una PC. Preciso, fácil de usar y optimizado para medir un par estático de hasta 10 Nm La última solución flexible para pruebas automáticas de torque de una amplia…