Search results
1701
Accessory
3/8" Upper Chuck Assembly for use on Helixa sensors
432-615
A standard self-centering 3-jaw chuck with key.
It has a maximum ⅜" (9.5 mm) opening and is connected to the Helixa torque sensor via an adaptor with female ⅜" square hole.
Used to secure a variety of test specimens for torque applications of 1.5 - 10…
1702
Accessory
Adapter, 500N, 10-32 to M6
432-193
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
10-32 UNF male thread to M6 threaded hole
1703
Accessory
Self-levelling Compression Plate Steel - 116 mm, 50 kN, QC-32 fitting
MecS223g-116
MecS223g - 116mm diameter Self-levelling Compression Plate:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The…
1704
Accessory
Self-levelling Compression Plate Steel - 156 mm, 25 kN, QC-20 fitting
MecS223k-156
MecS223k - 156mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel…
1705
Accessory
Adapter, 500 N, 10-32 UNF to 10-32 UNF, F to F
432-328
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1706
Accessory
Dual Footswitches (non-locking type) for pneumatic grips
Mec205-1
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-1:
Non-locking dual footswitches open the jaws of the pneumatic grip by pressing the foot pedal…
1707
Accessory
Self-levelling Compression Plate Steel - 196 mm, 25 kN, QC-20 fitting
MecS223k-196
MecS223k - 196mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel…
1708
Accessory
Schraubspannkopf - U-förmig doppeltwirkend, 5 kN, Öffnungsweite 24mm, Schnellwechsel-Befestigung QC-20
Mec240g
Mec 240g (nur Korpus):
Ein U-Form Schraubspannkopf mit doppeltwirkender Konstruktion ermöglicht die freie Einstellung der beiden Backen, so dass sie um die Mittelachse ausgerichtet werden können, um Zugversuche an symmetrischen und asymmetrischen Proben…
1709
Accessory
Scissor Grip, 20 kN, QC-20 or QC-32 fitting
Mec11-20
MEC11-20 (Body only) :
Scissor-action grip rated to 20 kN fitted with either QC-20 or QC-32 connection.
Locking function allows the grip to remain open when inserting a specimen.
Spring tension provides enough clamping force to prevent the specimen…
1710
Accessory
Pneumatische einfache Schraubspannköpfe mit einseitigen Kolben, 1 kN, Öffnungsweite 0-50mm, Paar, Schnellwechsel-Befestigung QC-20
Mec240k-S50+Ko
MEC 240k-S50 + kO (nur Korpus)
Ein Paar Luftdruckbetriebener einfache Schraubspannköpfe mit einem einseitigen Pneumatikkolben von Durchmesser 50 mm + einem manuellen Backenhalter.
Max. Spannkraft 1 kN mit einer Öffnungsweite von 0-50 mm, je nach Art der…
1711
Accessory
Compression Plate, Hardened and Ground,12 mm, 10-32 UNF
432-336
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
12mm diameter having 10-32 UNF female thread.
1712
Accessory
3-punkt-Biegevorrichtung, 10 kN, Stahl, Schnellwechsel-Befestigung QC-20
432-266
Eine einfache 3-Punkt-Biegevorrichtung, die standardmäßig mit einem oberen Amboss mit 5 mm Radius geliefert wird (QC 20mm Adapterbohrung) und zwei verstellbaren unteren Ambossen, ebenfalls mit einem Radius von 5 mm.
Der untere Stützbalken ist mit einem…
1713
Accessory
Float glass plates (10 pieces), 2" x 8" for FINAT 2 Peel Table
PSV15030
A set of 10 pieces of 2" wide x 8" long (51 x 203mm) float-glass plates. Used to mount adhesive specimens on when testing tensile peel strength to the requirements of FINAT and other standards.
For use with the FINAT 2 Assisted Peel Table - part number…
1714
Accessory
Medium Vice Grip - Single Action, 1 kN, 30 mm opening, QC-20 fitting
Mec240k-S30
MEC 240k-S30 (body only) :
A Medium Single-action Vice Grip allowing one jaw to be set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 1 kN in…
1715
Accessory
Kleiner Fadenspannzeug, 100 N, Schnellwechsel-Befestigung QC-20
432-270
Dieser kleine Fadenspannzeug ist aus Aluminium und wurde für das Testen bis 100 N von feinmechanischen, flexiblen Proben wie zum Beispiel feinen Fäden, feinen Drähten und Schnüren entwickelt, die sehr einfach nach Einspannung brechen könnten.
Die Probe…
1716
Accessory
Traverse-Verlängerung und erhobene Grundplatte
432-406
Die Traverse-Verlängerung von 38mm sowie die erhobene Grundplatte werden zusammen für die Montage von grösseren Proben mit Durchmessern bis auf 200 mm an einsäuligen MultiTest Prüfsysteme verwendet.
Die maximale Nennkraft des Prüfstandes wird um 36%…
1717
Accessory
QC Type J, lightweight adapter, Ø 20 mm M to 10-32 UNF F c/w pin
432-418
Quick-Change Male Post to Thread Adapter (lightweight)
Fixes directly to the 10-32 UNF screw in anvil plate of test stands or to the 10-32 UNF extension rod connected to loadcells…
1718
Accessory
Quadratische perforierte Druckplatte aus Aluminium, 400 x 400mm, Schnellwechsel-Befestigung QC-20 oder QC-32
Mec36L-400-L6x20
MEC36L-400-L6x20:
Diese quadratische Platte aus Aluminium eignet sich für Druckprüfungen mit Probestücken aus Schaum. Mit Perforationen ausgestattet, um die Luft während des Tests freizugeben.
Lochgrösse 6 mm Ø in Abstand von 20 mm.
Abmessungen: 400 x…
1719
Accessory
Large Single-action Vice Grip, rubber-faced, 2 kN, QC-20 fitting
432-267-V01
A Large Single-action Vice Grip featuring one fixed jaw and one jaw as freely adjustable to mechanically clamp the specimen in place.
Rated to 2 kN in tension with rubber-faced jaws of 78mm wide x 28mm high having an opening of 0-9mm. Provides excellent…
1720
Accessory
Lightweight Mini Vice Grip, 5 N, M6
432-281
By virtue of its spring loaded clamping action the Lightweight Mini Vice Grip is ideal for testing ultra low forces.
Weighing only 30 g it holds specimens without the need to tighten jaws by a thread, which may damage low-capacity loadcells or even the…
1721
Accessory
Cone Point - 8 mm diameter, 500 N, 10-32 UNF
432-358
A Cone Point probe of Ø 8mm with angle of 60°.
For compression testing of various components or materials up to 500 N.
Typically used where compressive force needs to be applied at a point or for penetration into a material over a short distance.…
1722
Accessory
Cable Cam Grip (large serrated), 5 kN, M10 or M12
432-108
Designed for holding insulated cables and wire. The sample is secured by the serrated cam, which self-tightens as load is applied and minimises the chance of sample slippage.
The grip body features a clearance hole and is supplied with an M10 and M12…
1723
Accessory
3/8" Lower Chuck Assembly for use on Helixa motor spindle
432-614
A standard self-centering 3-jaw chuck with key.
It has a maximum ⅜" (9.5mm) opening and is connected to the Helixa motor-drive spindle via an adaptor with quick-release grub-screw.
Used to secure a variety of test specimens for torque applications.
1724
Accessory
FPT-H1 loadcell calibration checking kit
432-635
For checking the calibration accuracy of loadcell type HILC used on the FPT-H1 Friction-Peel-Tear Tester.
Comprises a fixing plate with pulley, bench clamp and cord.
For use with Lightweight hanger and masses (part numbers 432-655 and 432-656).
1725
Accessory
3-Point Bend Jig, 1 kN, Aluminium, T-slot base
432-248
A lightweight 3-point Bend Jig with 60 mm high upper and lower anvils of 1.5mm radius. Has a support span up to 120 mm.
Ideal for most low-force bending and snapping applications.
For use with T-slot base plate (432-294) - sold separately - to fit…