Search results
1051
Accessory
Interface cable, AFG/AFTI (2006 - now) or Tornado (2008 - now) to PLC
351-063
Connects AFG, AFTI or Tornado for data comms to a Programmable Logic Controller. Comprises 15-pin female D-connector to twin screened wires.
1052
Accessory
Popper Cam Base, 1 kN, 10-32 UNF
432-179
The Popper Cam Base is used to secure the fabric when testing the strength of press studs ('poppers'), particularly on children’s clothing.
It is secured to the base of the test stand and the popper is fed through the retaining hole and positioned over…
1053
Accessory
Selbstausrichtende Druckplatte aus Stahl - Ø 156 mm, 50 kN, Schnellwechsel-Befestigung QC-32
MecS223g-156
MecS223g - 156mm Durchmesser Selbstausrichtende Druckplatte
Selbstnivellierung ermöglicht eine exakte Parallelität zwischen der oberen und der unteren Platte - ideal für Anwendungen, bei denen es entscheidend ist, die Verformung einer Probe genau zu…
1054
Accessory
Large Single-action Vice Grip, wave-form, 2 kN, QC-20 fitting
432-267-V02
A Large Single-action Vice Grip featuring one fixed jaw and one jaw as freely adjustable to mechanically clamp the specimen in place.
Rated to 2 kN in tension with wave-form jaws of 78mm wide x 28mm high having an opening of 0 - 6.5 mm. Provides…
1055
Accessory
Compression Plate, Nickel-plated, Vented by Holes & Cone, 50 mm, 10-32 UNF
432-347
Vented compression plates are ideal for top-load/crush testing of containers such as PET bottles.
Holes in the plate allow the passage of air to ensure that air inside the bottle is not compressed thereby falsifying the true measurement of the top-load…
1056
Accessory
Flat Crush Test Upper and Lower Plates with Modified Anvil Plate and Self-Adjusting Adapter
PDV11089
A number of test methods and standards employed by various industry bodies call upon specific crush fixtures and associated accessories to be used in conjunction with a compression tester. The Flat Crush Test fixtures support the test piece on the lower…
1057
Accessory
Selbstausrichtende Druckplatte aus Stahl - Ø 96 mm, 25 kN, Schnellwechsel-Befestigung QC-20
MecS223k-96
MecS223k - 96mm Durchmesser Selbstausrichtende Druckplatte
Selbstnivellierung ermöglicht eine exakte Parallelität zwischen der oberen und der unteren Platte - ideal für Anwendungen, bei denen es entscheidend ist, die Verformung einer Probe genau zu…
1058
Accessory
Chisel Point - 12 mm diameter, 5 kN, 5-16 UNC
432-361
Chisel Points probe with angle of of Ø 12mm 60° typically used for puncturing and splitting samples.
Maximum compressive force is 5 kN.
Fitted with a 5-16 UNC female thread for connection to loadcell.
1059
Accessory
3- & 4-point Bend Jig, 50 kN, Steel, QC-32 fitting
Mec103-cgr
MEC103 - A compact yet fully-configurable 50 kN Bend Jig in steel.
The main support beam attaches to the base of the test frame and has a bending span up to 120 mm. It can accept a wide selection of interchangeable single-roller or dual-roller anvils to…
1060
Accessory
Scherenspannzeug, 5 kN, Schnellwechsel-Befestigung QC-20
Mec11-5
MEC11-5 Scherenspannzeug (Körper ohne Backen)
Selbstspannende und selbstausrichtende Spannzeug für Scherprüfungen bis 5 kN.
Mit Schnellwechsel-Befestigung QC-20.
Die Proben werden durch Federvorspannung gehalten. Das Verhältnis Spannkraft zur Zugkraft…
1061
Accessory
Fadenspannzeug inkl. Grundträger für Einsatzbacken, 2.5 kN, Schnellwechsel-Befestigung QC-20
Mec9
MEC9 Fadenspannzeug
Dieser Spannzeug wurde entwickelt, um feine Drähte, dünne Seile oder schmale Bänder zwischen flachen Oberflächen bei Zugprüfungen bis 2.5 kN einzuklemmen.
Die Probe wird zunächst um einen Poller gewickelt und dann durch manuelles…
1062
Accessory
Diamant Backen für Mec227 Kleiner Schraubspannkopf, 100 N, 10 x 50 mm
Mec227-BD50
Diamantenbacken (10 mm hoch x 50 mm breit) - vernickelt und bechichtet mit synthesischen Diamanten.
Öffnungsweite = 0 - 8mm.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu gewährleisten (z. B. weiche Metalle {…
1063
Accessory
CrimpTest-1 kN Calibration Bracket
432-671
The calibration bracket is designed for verifying the accuracy of the CrimpTest-1 kN loadcell readings. For the user, this ensures that a unit does not continue to be used with inaccurate readings across its range. The main bracket should be bolted to a…
1064
Accessory
Pyramiden Backen für Mec94 Leichtes pneumatisches Spannzeug, 200 N, 25 x 50 mm
Mec94-BP50
Pyramiden Backen (25 mm hoch x 50 mm breit) - vernickelt mit einer Oberfläche aus 1,2 mm hohen gehärteten Stahlpyramiden.
Öffnungsweite = 0 - 20mm.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu gewährleisten (z…
1065
Accessory
V-jaws for 20 & 50kN Wedge Grip, for round samples 3-13 mm
Mec243-BV
V-Jaws (3-13mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes).
Supplied as 0.5 set = 2 jaws…
1066
Accessory
Gummibeschichte Backen für Mec240g Schraubspannkopf - U-formig, 5 kN, 30 x 100mm
Mec240g-BG100
Gummi Backen (30 mm hoch x 100 mm breit) - vernickelt mit einer 1 mm dicken Schicht aus NBR.
Öffnungsweite = Je nach Spannzeugtyp - siehe Datenblatt.
Bei Proben, die durch Quetschen an der Kontaktkante der Backe geschwächt werden können. (z.B. Filme,…
1067
Accessory
Testhaken (klein), 50 N, M6
432-171
Kleiner Hakenspannzeug mit M6 Innengewinde. Für allgemeine Prüfungen von Proben mit eingebautem Ringel, Zugfeder usw.geeignet.
1068
Accessory
Gummibeschichte Backen für Mec240k Schraubspannkopf, 2.5 kN, 30 x 50mm
Mec240k-BG50
Gummi Backen (30 mm hoch x 50 mm breit) - vernickelt mit einer 1 mm dicken Schicht aus NBR.
Öffnungsweite = Je nach Spannzeugtyp - siehe Datenblatt.
Bei Proben, die durch Quetschen an der Kontaktkante der Backe geschwächt werden können. (z.B. Filme,…
1069
Accessory
Heavy-duty Vice Grip - Single Action, 10 kN, QC-20 fitting
Mec154-10
MEC 154-10 (body only - aluminium):
A Single-action Heavy-duty Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place…
1070
Accessory
Gehärtete und geschliffene Druckplatte, 19 mm, 10-32 UNF
432-337
Gehärtete und geschliffene Druckplatten haben eine glatte, kraftzfeste Oberfläche. Sie eignen sich perfekt für Druckprüfungen auf Proben wie, zum Beispiel Feder, die einer normalen Druckplatte beschädigen könnte.
19mm Durchmesser mit Innengewinde 10-32…
1071
Accessory
U-Form Pneumatic Vice Grip - Double Action, 2.5 kN, 18 mm opening, pair, QC-20 fitting
Mec240g+2Ko
MEC 240g +2kO (body only) :
A pair of pneumatically-operated, Double-action U-form Vice Grips with an opening of 0-18mm depending on the jaw types selected (sold separately).
Each grip is fitted with 2 x 70 mm diameter pneumatic pistons, which allow…
1072
Accessory
432-662-1.0 Gold torque reference bottle 1.0 N.m
432-662-1.0
The Torque Reference Bottle (also known as ' Gold Bottle') provides a means of quickly verifying the calibration of motorised torque measuring systems Helixa and Vortex. Its magnetic clutch repeatedly slips at a factory-set, specified torque value. The…
1073
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+Ko
MEC 240k +kO (body only) :
A pair of pneumatically-operated, Single-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
1074
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 30 mm opening, pair, QC-20 fitting
Mec240k-S30+Ko
MEC 240k- S30+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-30mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter…
1075
Accessory
V-jaws for Mec240g U-Form Vice Grip, 5 kN, for round sample Ø 5-50 mm
Mec240g-BV5
V-Jaws (5-50mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods,
tubes)
Supplied as 0.5 set = 2 jaws (…