Search results
401
Accessory
38 mm Crosshead extension only
432-508
The dovetailed crosshead-extension allows the loadcell on a single-column MultiTest stand to be positioned further from the column to accommodate larger test samples or to fit deeper grips without hitting the column.
Load rating of the test stand is…
402
Accessory
Dual Footswitches (non-locking type) for pneumatic grips
Mec205-1
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-1:
Non-locking dual footswitches open the jaws of the pneumatic grip by pressing the foot pedal…
403
Accessory
MLTE 700 Long Travel Extensometer
432-841
The MLTE 700 Long Travel Extensometer is designed to be used with Mecmesin test systems when running VectorPro MT materials testing software. It accurately measures strain directly from the test specimen to enable the most accurate calculation of the…
404
Accessory
Large Chain Link Assembly (long) and Hook, 2.5 kN, 5-16 UNC
432-410
The large chain link assembly (long) and hook are used to attach to a variety of objects, which are otherwise difficult to hold.
The chain is 1 m long and is supplied with a clevis fastener at each end. Into one end is screwed a large test hook, which…
405
Accessory
Heavy-duty Pneumatic Plane Grips - pyramid-faced jaws, 5 kN, Pair, QC-20 fitting
432-374
A pair of pneumatically-operated, single-action Heavy-duty Pneumatic Plane Grips with an opening of 0-12 mm.
Each 40mm high x 76mm wide jaw is fitted with a pyramidal surface to secure specimens tightly. The specimen is held between the fixed jaw and…
406
Accessory
Cable Cam Grip (smooth), 1 kN, 10-32 UNF
432-404
Cable Cam Grip - smooth, small
Designed for holding insulated cables and wire. The specimen is secured by the cam, which self-tightens as load is applied and spreads the load evenly.
Smooth cams are preferable for materials where a serrated cam may bite…
407
Accessory
Dual Handswitches (locking type) for pneumatic grips
Mec205-3
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-3:
Locking dual handswitches open the jaws of the grip by pushing the lever and remain open after…
408
Accessory
Wedge Grip for terminals for CrimpTest-1 kN
432-607
Wedge Grip for terminals for CrimpTest-1 Tester (supplied as standard with Tester)
The 1 kN Wedge Grip is ideal for tensile testing of flat crimp terminal and connectors when determining their pull strength.
A spring-loaded lever ensures the serrated…
409
Accessory
Dual Footswitches (locking type) for pneumatic grips
Mec205-2
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec 205-2:
Locking dual footswitches open the jaws of the grip by pressing the foot pedal and remain…
410
Accessory
Coefficient of Friction COF Fixture (ASTM D1894), 10-32 UNF
432-144
Designed to measure the coefficient of friction (COF) to ASTM D1894, between two pieces of material.
The COF test determines the kinetic and static resistance of one surface being dragged across another.
This friction table can be mounted to the base…
411
Accessory
Pull Peel Wheel Fixture, QC-20 fitting
432-265
The pull peel wheel fixture is designed for mounting to the base of a motorised test stand to test the peel strength of flexible adhesive-backed materials (eg. tapes).
Specimens are wound around the Pull Peel Wheel and the free end is clamped in a…
412
Accessory
Dual Footswitches (non-locking type) for pneumatic grips
Mec205-1
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-1:
Non-locking dual footswitches open the jaws of the pneumatic grip by pressing the foot pedal…
413
Accessory
Large Pneumatic Plane Grips, pyramid-faced jaws, 1 kN, Pair, QC-20 fitting
432-276
A pair of pneumatically-operated, single-action Large Pneumatic Plane Grips with an opening of 0-14 mm.
Each 30mm high x 51mm wide jaw is fitted with a pyramidal surface to secure specimens tightly. The specimen is held between the fixed jaw and the…
414
Accessory
Compression Plate, Nickel-plated, Vented by Slots & Flat, 50 mm, 10-32 UNF
432-346
Vented compression plates are ideal for top-load/crush testing of containers such as PET bottles.
Slots in the plate allow the passage of air to ensure that air inside the bottle is not compressed thereby falsifying the true measurement of the top-load…
415
Accessory
Orbis and Tornado Mk II/Vortex torque cell accuracy check rig
432-621
This bench-top unit enables the on-site verification of the calibration status of Orbis MkII, Tornado MkII testers, and static torque sensors rated from 1.5 N.m to 10 N.m. Using dead-weight masses, the kit allows you to quickly decide whether or not…
416
Accessory
Wedge Grip (small), 200 N, 10-32 UNF
432-415
The small, lightweight Wedge Grip is ideal for tensile testing below 200 N.
A spring-loaded lever ensures the serrated jaws (25mm wide x 20mm high) are easy to open for fast securing and release of samples. As load is applied, the self-tightening action…
417
Accessory
Dual Handswitches (locking type) for pneumatic grips
Mec205-3
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-3:
Locking dual handswitches open the jaws of the grip by pushing the lever and remain open after…
418
[Page extract]
What’s their secret?
“Prior to joining our class, most of our students had no actual experience with materials testing, apart from what they saw in a textbook.
419
[Page extract]
BS EN ISO 12625-12
Specifies a test method for the determination of the tensile strength of perforated lines of tissue paper. It uses a tensile-testing apparatus operating with a constant rate of elongation.
420
Case study
Peel testing Ostomy bags
Requirement
Salts Healthcare, a leading manufacturer and supplier of health care products required a low capacity system for testing the integrity of their hydrocolloid products.
421
Case study
Bulk liquid carrier closures
Customised engineering example
Our client manufactures liquid bulk carriers fitted with two-part plastic valve closures. The collar is welded to a plastic bag, and the valve closure is fixed onto it by a compression joint.
422
[Page extract]
Test type
Mecmesin provides solutions for tests on products or materials that require the measurement of their physical strength. Typically this involves applying and recording the force to pull apart, push together, twist or turn.
423
Case study
Top-load testing PET bottles
Requirement
Esterform Packaging manufacture more than a million PET bottles and preforms per day for major processors of bottled water, juices, soft drinks, dairy and household products.
424
Case study
Custom vice for peel adhesion testing
Customised engineering example
A leading manufacturer of upholstery, used in vehicles and aircraft, needed to test the peel adhesion strength of leather bonded to metal.
425
Case study
Hypodermic needle sharpness testing
Customised engineering example
Hypodermic needles are tested to determine how their design influences the ease of insertion into the skin, patient pain and skin trauma.