Search results
326
Accessory
Large Pneumatic Plane Grips, pyramid-faced jaws, 1 kN, Pair, QC-20 fitting
432-276
A pair of pneumatically-operated, single-action Large Pneumatic Plane Grips with an opening of 0-14 mm.
Each 30mm high x 51mm wide jaw is fitted with a pyramidal surface to secure specimens tightly. The specimen is held between the fixed jaw and the…
327
Accessory
Diamant Backen für Mec227 Kleiner Schraubspannkopf, 100 N, 10 x 100 mm
Mec227-BD100
Diamantenbacken (10 mm hoch x 100 mm breit) - vernickelt und bechichtet mit synthesischen Diamanten.
Öffnungsweite = 0 - 6mm.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu gewährleisten (z. B. weiche Metalle {…
328
Accessory
Double Cam Grip (small serrated), 500 N, 10-32 UNF
432-387
The Small Double Cam Grip is designed for holding components into which the serrated faces can bite into the material and secure tightly eg. insulated cables and wire.
The specimen is secured between the 2 cams, which self-tighten as a load is applied…
329
Accessory
Diamant Backen für Mec240g Schraubspannkopf - U-formig, 5 kN, 30 x 80mm
Mec240g-BD80
Diamantenbacken (30 mm hoch x 80 mm breit) - vernickelt und bechichtet mit synthesischen Diamanten.
Öffnungsweite = Je nach Spannzeugtyp - siehe Datenblatt.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu…
330
Accessory
QC Type J, lightweight adapter, Ø 20 mm M to 10-32 UNF F c/w pin
432-418
Quick-Change Male Post to Thread Adapter (lightweight)
Fixes directly to the 10-32 UNF screw in anvil plate of test stands or to the 10-32 UNF extension rod connected to loadcells…
331
Accessory
3/8" Lower Chuck Assembly for use on Helixa motor spindle
432-614
A standard self-centering 3-jaw chuck with key.
It has a maximum ⅜" (9.5mm) opening and is connected to the Helixa motor-drive spindle via an adaptor with quick-release grub-screw.
Used to secure a variety of test specimens for torque applications.
332
Accessory
Diamant Backen für Mec240k Schraubspannkopf, 2.5 kN, 30 x 80mm
Mec240k-BD80
Diamantenbacken (30 mm hoch x 80 mm breit) - vernickelt und bechichtet mit synthesischen Diamanten.
Öffnungsweite = Je nach Spannzeugtyp - siehe Datenblatt.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu…
333
Accessory
Eccentric Roller Grip - Pyramid (serrated) roller, 10 kN, QC-20 fitting
Mec7-10
MEC7-10 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 60mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
334
Accessory
Diamant Backen für Mec94 Leichtes pneumatisches Spannzeug, 200 N, 25 x 25 mm
Mec94-BD25
Diamant Backen (25 mm hoch x 25 mm breit) - vernickelt und bechichtet mit synthesischen Diamanten.
Öffnungsweite = 0 - 20 mm.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu gewährleisten (z. B. weiche Metalle {…
335
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+2Ko
MEC 240k +2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
336
Accessory
Eccentric Roller Grip - pyramid (serrated) roller, 1 kN, QC-20 fitting
Mec7-1
MEC7-1 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 50mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
337
Accessory
Lever-operated Cam Grip (large serrated), 500 N, 10-32 UNF
432-047
The Large Lever-operated Cam Grip is fitted with a 10-32 UNF female thread and supplied with a male grub-screw. It is designed with a plated 70mm wide roller cam to self-tighten as a load is applied to a sample, spreading the load evenly. The lever also…
338
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+2Ko
MEC 240k +2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
339
Accessory
Compression Plate, Self-levelling, Hardened & Ground, 50 mm, 10-32 UNF
432-349
Self-levelling compression plates are ideal for general compression testing on a range of materials and finished products. Self-levelling allows parallelism to be set for those applications where it is critical to accurately measure the deformation of a…
340
Accessory
Webbing Grip, 2 kN, QC-20 fitting
432-269
Webbing Grips are designed for tensile testing of high strength belts and tapes below 2 kN.
The sample is wound around the knurled roller and then around the smooth roller. As load is applied, the smooth roller moves in the slot to secure tightly…
341
Accessory
Pyramidenbacken für Mec11-50 Scherenspannzeug, 50 kN, 50 x 100mm
Mec11-50-BP
Pyramidenbacken (50 mm hoch x 100 mm breit) - vernickelt mit einer Oberfläche aus 1,2 mm hohen gehärteten Stahlpyramiden.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu gewährleisten (z. B. weiche Metalle {…
342
Accessory
Wedge Grip (small), 500 N, 10-32 UNF
432-385
The small, lightweight Wedge Grip is ideal for tensile testing below 500 N.
A spring-loaded lever ensures the serrated jaws (16mm wide x 20mm high) are easy to open for fast securing and release of samples. As load is applied, the self-tightening action…
343
Accessory
Diamant Backen für Mec240g Schraubspannkopf - U-formig, 5 kN, 30 x 100mm
Mec240g-BD100
Diamantenbacken (30 mm hoch x 100 mm breit) - vernickelt und bechichtet mit synthesischen Diamanten.
Öffnungsweite = Je nach Spannzeugtyp - siehe Datenblatt.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu…
344
Accessory
Padded Radiused Probe, 500 N, 5-16 UNC
432-414
The Padded Radiused Probe is used with a short extension rod to connect to a digital force gauge to measure tension and compression.
It has a thin layer of rubber and is specially designed for use in manual handling and ergonomic assessment applications…
345
Accessory
Wedge Grip for terminals for CrimpTest-1 kN
432-607
Wedge Grip for terminals for CrimpTest-1 Tester (supplied as standard with Tester)
The 1 kN Wedge Grip is ideal for tensile testing of flat crimp terminal and connectors when determining their pull strength.
A spring-loaded lever ensures the serrated…
346
Accessory
Diamant Backen für Mec240k Schraubspannkopf, 2.5 kN, 30 x 50mm
Mec240k-BD50
Diamantenbacken (30 mm hoch x 50 mm breit) - vernickelt und bechichtet mit synthesischen Diamanten.
Öffnungsweite = Je nach Spannzeugtyp - siehe Datenblatt.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu…
347
Accessory
Eccentric Roller Grip - Smooth roller against rubber base, 1 kN, QC-20 fitting
Mec7-1-SR
MEC7-1-SR Eccentric Cam Grip
Fitted with a smooth-faced 50mm wide roller cam and a rubber-coating on the contact face of the grip body. As a load is applied to a specimen the cam self-tightens, spreading the load evenly. Used for specimens where a…
348
Accessory
Diamantenbacken, einsetzbar 37 x 15 mm (H x B), 1 Satz
Mec9-EBD
MEC9-EBD: Diamanten Einsatzbacken für MEC9 Fadenspannzeug
Diamanten Einsatzbacken mit einer Spannfläche von 37 hoch x 15mm breit. vernickelt und beschichtet mit synthesischen Diamanten.
Für flache Proben von Materialien, die einen "Biss" benötigen, um…
349
Accessory
U-form Pneumatic Vice Grip - Single Action, 2.5 kN, 18 mm opening, pair, QC-20 fitting
Mec240g+Ko
MEC 240g +kO (body only) :
A pair of pneumatically-operated, Single-action U-form Vice Grips with an opening of 0-18mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 70 mm diameter pneumatic…
350
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+Ko
MEC 240k- S50+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…