Search results
501
[Page extract]
How wing tear testing is performed
Specimen geometry and preparation
Testing accuracy begins with correct specimen preparation. For wing tear tests, samples are cut into shapes with two projecting wings joined by a narrow central region where the tear initiates.
502
Case study
ROPP Wine Closure Removal Torque
Requirement
The packaging of wine has great influence on the quality of the product delivered to the customer. Traditionally the method of closure has been the natural, or latterly synthetic, cork stopper.
503
Case study
Kantenstauchtest (ECT) von Wellpappe
Erfordernis Einführung Während der Wochen der Ausgangssperre aufgrund von COVID-19 kam es zu einem Anstieg der Hauslieferungen.
504
Product
Präzisions-Drehmomentprüfsystem
Helixa-i
876-501
Der Helixa-i ist ein erstklassiges Drehmomentprüfsystem, das von einer auf einem PC laufenden Software gesteuert wird. Für hochpräzise Anwendungen mit eventuell sehr kleinen Drehmomenten entwickelt, wobei die Genauigkeit von höchster Wichtigkeit ist.
Mit…
505
Case study
Face mask strength testing
Requirement
With China now producing over 200 million face masks a day — more than twenty times the amount it made at the start of February – plus other nations diverting manufacturing expertise into face-mask, respirator and other non-invasiv
506
Case study
Festigkeitsprüfung von Gesichtsschutzmasken
Anforderung
Da China jetzt mehr als 200 Millionen Schutzmasken pro Tag produziert - mehr als das 20-fache der Menge, die es Anfang Februar gefertigt hat - und andere Nationen seine Fertigungskompetenz in die Herstellung von Gesichtsschutzmaske
507
Accessory
Co-efficient of Friction (COF) Sled for ASTM D1894 and ISO 8295, 200g (foam), FPT-H1
432-633
A neoprene-faced sled with magnetic grips, for testing coefficient of friction of paper samples to TAPPI T549. Supplied with rigid and extensible links.
For use on the FPT-H1 Friction Tester.
508
Accessory
Cable tie break fixture for CrimpTest-1 kN
432-653
Cable-tie Break Fixture for CrimpTest-1
The Cable-tie Break Fixture comprises 2 split halves each having semi-circular stepped bollards for testing the tensile strength of cable-ties. There are 3 steps of 10 mm height steps to accommodate various length…
509
Accessory
Rubber jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 80 mm
Mec240k-BG80
Rubber-faced Jaws (30mm x 80mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = see datasheet for various spans according to the grip body selected.
For fragile samples, which may get weakened by pinching at the contact-…
510
Accessory
Dual Footswitches (locking type) for pneumatic grips
Mec205-2
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec 205-2:
Locking dual footswitches open the jaws of the grip by pressing the foot pedal and remain…
511
Accessory
Square Perforated Aluminium Compression Plate, 200 x 200 mm, QC-20 or QC-32 fitting
Mec36L-200-L6x20
MEC36L-200-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 200mm x 200mm.
Fitted with QC-20mm or 32mm…
512
Accessory
Square Perforated Aluminium Compression Plate, 150 x 150 mm, QC-20 or QC-32 fitting
Mec36L-150-L6x20
MEC36L-150-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 150mm x 150mm
Fitted with QC-20mm or 32mm…
513
Accessory
Dual Footswitches (locking type) for pneumatic grips
Mec205-2
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec 205-2:
Locking dual footswitches open the jaws of the grip by pressing the foot pedal and remain…
514
Case study
Flip-cap force test
Requirement
A repeatable test system to check the opening force of flip cap lids, accommodating 3 different diameter caps with minimal fixture changeover.
515
Accessory
Square Perforated Aluminium Compression Plate, 200 x 200 mm, QC-20 or QC-32 fitting
Mec36L-200-L6x20
MEC36L-200-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 200mm x 200mm.
Fitted with QC-20mm or 32mm…
516
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 80 mm
Mec240k-BD80
Diamond Jaws (30mm x 80mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
517
[Page extract]
Case examples
Tennis ball compression - Testing applies a standard load to measure deformation and rebound characteristics, ensuring consistent performance for bounce, speed, and control.
518
Case study
Powdered drink container - compressive strength & lid peel tests
Customised engineering example
An international supplier of a powdered hot-chocolate drink wanted to test several aspects of their packaging. The powder is packed in a plastic-capped, foil-sealed cardboard tube container.
519
Accessory
Rubber jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 50 mm
Mec240k-BG50
Rubber-faced Jaws (30mm x 50mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = see datasheet for various spans according to the grip body selected.
For fragile samples, which may get weakened by pinching at the contact-…
520
Accessory
Dual Footswitches (non-locking type) for pneumatic grips
Mec205-1
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-1:
Non-locking dual footswitches open the jaws of the pneumatic grip by pressing the foot pedal…
521
Accessory
Square Perforated Aluminium Compression Plate, 150 x 150 mm, QC-20 or QC-32 fitting
Mec36L-150-L6x20
MEC36L-150-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 150mm x 150mm
Fitted with QC-20mm or 32mm…
522
Accessory
Blank (smooth) Inset Jaws for MEC9 Thin Wire Grip, 2.5 kN
Mec9-EB
MEC9-EB Blank Jaws
Blank (smooth) inset jaws of 37 mm height x 15 mm width, 0.5 set. For fitting into the carrier of the MEC9 Thin Wire Grip.
Used when jaws require a specific surface to be machined onto them. Alternatively for affixing an abrasive…
523
Accessory
Dual Footswitches (non-locking type) for pneumatic grips
Mec205-1
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-1:
Non-locking dual footswitches open the jaws of the pneumatic grip by pressing the foot pedal…
524
Accessory
Pneumatische U-Form-Schraubspannköpfe mit einseitigen Kolben, 2.5 kN, Paar, Schnellwechsel-Befestigung QC-20
Mec240g+Ko
MEC 240g + 2kO (nur Korpus)
Ein Paar Luftdruckbetriebener U-Form Schraubspannköpfe mit einseitigen Pneumatikkolben jeweils mit Durchmesser 70 mm.
Die "U-Form", die in den Aluminiumkörper dieses Schraubspannkopfes geschnitten wird, schafft den Platz für…
525
Accessory
Blank (smooth) Inset Jaws for MEC9 Thin Wire Grip, 2.5 kN
Mec9-EB
MEC9-EB Blank Jaws
Blank (smooth) inset jaws of 37 mm height x 15 mm width, 0.5 set. For fitting into the carrier of the MEC9 Thin Wire Grip.
Used when jaws require a specific surface to be machined onto them. Alternatively for affixing an abrasive…