Search results
1251
Event
Compression Testing in Top Load Applications
A typical challenge in packaging, and bottling applications is trying to balance product integrity, where the container might be too weak and crush under load, and excessive raw material cost, where the container is too strong.
1252
Accessory
FPT-H1 loadcell calibration checking kit
432-635
For checking the calibration accuracy of loadcell type HILC used on the FPT-H1 Friction-Peel-Tear Tester.
Comprises a fixing plate with pulley, bench clamp and cord.
For use with Lightweight hanger and masses (part numbers 432-655 and 432-656).
1253
Accessory
20 kN Wedge Grip, QC-20 fitting
Mec243-20
MEC 243-20 Wedge Grip (body only):
A multipurpose self-tightening Wedge Grip with a lever arm for rapidly securing and releasing the specimen when testing.
Rated to 20 kN in tension with an opening of 0-16mm depending on the jaw types selected (sold…
1254
[Page extract]
BS ISO 3597-2
ISO 3597-2 specifies a method for determining the flexural strength of composite rods of circular cross-section made of roving-reinforced resin.
1255
Accessory
Compression Plate - Aluminium, 10 kN, 196 mm, QC-32 fitting
Mec23-196-32-AL
MEC23-196-32-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
196mm diameter.
Fitted with the QC-32mm female…
1256
Accessory
Compression Plate - Aluminium, 10 kN, 296 mm, QC-32 fitting
Mec23-296-32-AL
MEC23-296-32-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
296mm diameter.
Fitted with the QC-32mm female…
1257
[Page extract]
BS EN 12697-23
This standard specifies a test method for determining the (splitting) indirect tensile strength of cylindrical specimens of bituminous mixtures.
1258
[Page extract]
DIN EN 1464
This European Standard specifies a floating roller method for the determination of the peel resistance of high-strength adhesive bonds between one rigid adherend and one flexible adherend when tested under specified conditions of preparation and testing
1260
[Page extract]
ISO 11608-5
This part of ISO 11608 specifies requirements and test methods for the automated functions of needle-based injection systems with automated functions (NIS-AUTO), for the administration of medicinal products in humans.
1261
Accessory
Cone Point - 12 mm diameter, 5 kN, 5-16 UNC
432-359
A Cone Point probe of Ø 12.7 mm with angle of 60°.
For compression testing of various components or materials up to 5 kN.
Typically used where compressive force needs to be applied at a point or for penetration into a material over a short distance.…
1262
Accessory
Fabric Grip, 200 N, 10-32 UNF
432-386
Fabric grips are designed for tensile and elongation testing of fabric and thin materials below 200N.
Material is gripped between two smooth spring-loaded faces which are clamped together by two locking nuts at either side of the grip to ensure the…
1263
Accessory
Mettler Toledo RS-P26 printer (Euro)
432-503
A basic ticket printer with simple statistical analysis manufactured by Mettler Toledo.
Communicates with Mecmesin force gauges via RS232 serial link - order interface cable separately.
Supplied with mains-power adaptor 220V with plug (2-pin round)
Uses…
1264
Accessory
Compression Plate - Aluminium, 10 kN, 156 mm, QC-32 fitting
Mec23-156-32-AL
MEC23-156-32-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
156mm diameter.
Fitted with the QC-32mm female…
1265
Accessory
Compression Plate - Aluminium, 10 kN, 246 mm, QC-32 fitting
Mec23-246-32-AL
MEC23-246-32-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
246mm diameter.
Fitted with the QC-32mm female…
1266
Accessory
Compression Plate - Aluminium, 10 kN, 56 mm, QC-20 fitting
Mec23-56-20-AL
MEC23-56-20-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
56mm diameter.
Fitted with the QC-20mm female connection…
1267
Accessory
Cone Point - 8 mm diameter, 500 N, 10-32 UNF
432-358
A Cone Point probe of Ø 8mm with angle of 60°.
For compression testing of various components or materials up to 500 N.
Typically used where compressive force needs to be applied at a point or for penetration into a material over a short distance.…
1268
Accessory
Fabric Grip, 100 N, 10-32 UNF
432-384
Fabric grips are designed for tensile and elongation testing of fabric and thin materials below 100N.
Material is gripped between two smooth spring-loaded faces which are clamped together by two locking nuts at either side of the grip to ensure the…
1269
Case study
Automatisches Spritzen- und Gleitkraftsystem für Spritzen
Anforderung Die COVID-19-Pandemie hat die Hersteller von Spritzen und Fläschchen einer beispiellosen Nachfrage gestellt.
1270
[Page extract]
Performing the flat crush test
A standard flat crush test includes the following stages:
1271
[Page extract]
Performing the edge crush test
Sample preparation
Cut specimens to standard dimensions with clean, parallel edges.
Condition samples in a controlled temperature and humidity environment to ensure consistent moisture content.
Wax edges if required
1272
Case study
Gefesselte Verschlüsse - Prüfung der Befestigungskraft
Anforderung
In dem Maße, in dem Verbraucher, Hersteller und Gesetzgeber umweltfreundlichere Verpackungen fordern und die zunehmende Verwendung von wiederverwertbaren Materialien alltäglich ist, hat sich die Aufmerksamkeit auf den einfachen Kuns
1273
[Page extract]
Jaws
Choosing the most appropriate jaw type for a tensile grip can be tricky. It is a balance between having sufficient hold of the specimen to prevent it slipping and not having too ‘aggressive’ a hold which damages the specimen.
1274
Page
Über Mecmesin
Mecmesin - Lösungen für Ergebnisse, denen Sie vertrauen können
Seit 1977 hat Mecmesin zuverlässige Kraft-, Material- und Drehmoment-Testlösungen fü
1275
[Page extract]
Case studies - real-world applications
Medical vial stoppers
A pharmaceutical company tested rubber vial stoppers to ASTM F2132 to ensure they resisted accidental puncture during handling.