Search results
426
Accessory
Diamond coated jaws for Mec227 Lightweight Vice Grip, 100 N, 10 x 100 mm
Mec227-BD100
Diamond Jaws (10mm x 100mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0 - 6mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)…
427
Accessory
Pyramid jaws for Mec11-20 Scissor Grip, 20 kN, 25 x 50 mm
Mec11-20-BP
Pyramid Jaws (25mm x 50mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
428
Accessory
Compression Plate, Self-levelling, Hardened & Ground, 70 mm, 5-16 UNC
432-350
Self-levelling compression plates are ideal for general compression testing on a range of materials and finished products. Self-levelling allows parallelism to be set for those applications where it is critical to accurately measure the deformation of a…
429
Accessory
Diamond coated jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 50 mm
Mec240g-BD
Diamond Jaws (30mm x 50mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
430
Accessory
Pyramid (serrated) jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 100 mm
Mec154-BP100
Pyramid Jaws (40mm high x 100mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 13 mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper…
431
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+Ko
MEC 240k +kO (body only) :
A pair of pneumatically-operated, Single-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
432
Accessory
Pyramid (serrated) jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 100 mm
Mec227-BP100
Pyramid Jaws (10mm high x 100mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 6mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals - aluminium, copper, soft steel, paper…
433
Accessory
Pyramid (serrated) jaws, 30 x 80 mm, 0.5 set
Mec240k-BP80
Pyramid Jaws (30mm x 80mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
434
Accessory
Compression Plate - Hardened Steel, 25 kN, 296 mm, QC-20 fitting
Mec23-296-20-St
MEC23-296-20-St :
Round compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Suitable for hard specimens such as metals, hard plastics, small stones and granules.
296mm diameter.
Fitted…
435
Accessory
Pyramid-faced jaws for 10 kN Wedge Grip, 40 x 34mm
MecS622-BP
Pyramid Jaws (40mm x 34mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
436
Accessory
Diamond coated jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 100 mm
Mec240g-BD100
Diamond Jaws (30mm x 100mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
437
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 100 mm
Mec240k-BD100
Diamond Jaws (30mm x 100mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
438
Accessory
Small Single-action Vice Grip, 200 N, QC-20 fitting
432-264
A general-purpose Single-action Vice Grip.
Ideal for testing low force flat specimens. The open side design facilitates easy loading of thin, non-rigid samples, which are clamped in place.
Fitted with 30 mm x 30 mm flat-faced jaws and rated to 200 N in…
439
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+Ko
MEC 240k- S20+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic piston.
This…
440
Accessory
Radiused Probe - 11 mm, 500 N, 10-32 UNF
432-355
Radiused Probes are used to perform penetration or puncture tests on a wide range of products.
Aspects measured include firmness and ripeness of cosmetics, medical gels and foodstuffs.
8mm tip rising to 11mm outer diameter. Fitted with 10-32 UNF female…
441
Accessory
Compression Plate Square, Hardened Steel, 196 x 196 mm, QC-20 or QC-32 fitting
Mec36-196-St
MEC36-196-St :-
Square compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Also supplied with 4 fixing legs to support the weight of the steel plate. Suitable for hard specimens such as…
442
Accessory
Wedge Grip (small), 200 N, 10-32 UNF
432-415
The small, lightweight Wedge Grip is ideal for tensile testing below 200 N.
A spring-loaded lever ensures the serrated jaws (25mm wide x 20mm high) are easy to open for fast securing and release of samples. As load is applied, the self-tightening action…
443
Accessory
Square Perforated Aluminium Compression Plate, 400 x 400 mm, QC-20 or QC-32 fitting
Mec36L-400-L6x20
MEC36L-400-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 400mm x 400mm.
Fitted with QC-20mm or 32mm…
444
Accessory
Diamond coated jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 60 mm
Mec154-BD
Diamond Jaws (40mm high x 60mm wide) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0 - 30 mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and…
445
Accessory
Puncture Test Fixture to EN ISO 14477, 500N, QC-20 fitting
MecS511
This EN ISO 14477 Puncture Test Fixture is for testing resistance strength in flexible packaging materials.
The specimen is clamped in the lower specimen holder, which is connected to the base plate of the test stand via a QC-20 female hole.
An upper '…
446
Accessory
Pyramid (serrated) jaws for 20 or 50 kN Wedge Grip, 50 x 35mm, 4 - 16 mm opening
Mec243-BP16
Pyramid Jaws (50mm high x 35mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Jaw opening = 4 - 16mm.
For flat specimens of materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft…
447
Accessory
Pyramid (serrated) jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 25 mm
Mec94-BP25
Pyramid Jaws (25mm high x 25mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 20 mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper…
448
Accessory
Sample cutter 25 mm wide
PSV13143
Sample cutter 25mm wide - for preparing peel and tensile samples of film/paper.
Includes spare blades and hardened protective mat on which specimens can be cut.
449
Accessory
Compression Plate - Hardened Steel, 25 kN, 196 mm, QC-20 fitting
Mec23-196-20-St
MEC23-196-20-St :
Round compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Suitable for hard specimens such as metals, hard plastics, small stones and granules.
196mm diameter.
Fitted…
450
Accessory
Compression Plate Square, Hardened Steel, 196 x 196 mm, QC-20 or QC-32 fitting
Mec36-196-St
MEC36-196-St :-
Square compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Also supplied with 4 fixing legs to support the weight of the steel plate. Suitable for hard specimens such as…