Search results
176
Accessory
standard T-slot fixture table
432-243
This standard fixture table is used for easy configuration and alignment of test fixtures. Fits to a T-slot anvil.
177
Accessory
sample holder for standard fixture table
432-244
Fits to the standard fixture table (432-243) and used for easy configuration and alignment of test fixtures. The small-sample holder has been designed to accommodate spherical or irregular samples. Three sizes of holding plate are supplied.
178
Accessory
Set of 4 fixing pegs for torque testers - 100mm high
432-250
Set of 100mm high extended-length gripping pegs.
These gripping pegs have a soft-rubber sleeve to clamp and keep taller samples secure and vertically aligned during torque testing.
Pegs are fitted with an M6 thread and attach to upper and lower…
179
Accessory
Spring-Loaded Fold Grip, 2 kN, QC-20 fitting
432-262
Fitted with a 45mm wide roller cam having a cross-hatch knurled surface. The roller closes onto a serrated contact face of the grip body.
The specimen is folded around the knurled roller to give maximum contact area. As a load is applied to the…
180
Accessory
Small Single-action Vice Grip, 200 N, QC-20 fitting
432-264
A general-purpose Single-action Vice Grip.
Ideal for testing low force flat specimens. The open side design facilitates easy loading of thin, non-rigid samples, which are clamped in place.
Fitted with 30 mm x 30 mm flat-faced jaws and rated to 200 N in…
181
Accessory
Pull Peel Wheel Fixture, QC-20 fitting
432-265
The pull peel wheel fixture is designed for mounting to the base of a motorised test stand to test the peel strength of flexible adhesive-backed materials (eg. tapes).
Specimens are wound around the Pull Peel Wheel and the free end is clamped in a…
182
Accessory
Large Single-action Vice Grip, pyramid-faced, 2 kN, QC-20 fitting
432-267
A Large Single-action Vice Grip featuring one fixed jaw and one jaw as freely adjustable to mechanically clamp the specimen in place.
Rated to 2 kN in tension with pyramid-faced jaws of 78mm wide x 28mm high having an opening of 0-9mm. Provides…
183
Accessory
Large Single-action Vice Grip, rubber-faced, 2 kN, QC-20 fitting
432-267-V01
A Large Single-action Vice Grip featuring one fixed jaw and one jaw as freely adjustable to mechanically clamp the specimen in place.
Rated to 2 kN in tension with rubber-faced jaws of 78mm wide x 28mm high having an opening of 0-9mm. Provides excellent…
184
Accessory
Large Single-action Vice Grip, wave-form, 2 kN, QC-20 fitting
432-267-V02
A Large Single-action Vice Grip featuring one fixed jaw and one jaw as freely adjustable to mechanically clamp the specimen in place.
Rated to 2 kN in tension with wave-form jaws of 78mm wide x 28mm high having an opening of 0 - 6.5 mm. Provides…
185
Accessory
Webbing Grip, 2 kN, QC-20 fitting
432-269
Webbing Grips are designed for tensile testing of high strength belts and tapes below 2 kN.
The sample is wound around the knurled roller and then around the smooth roller. As load is applied, the smooth roller moves in the slot to secure tightly…
186
Accessory
Small Circular Bollard Grip, 100 N, QC-20 fitting
432-270
The Small Circular Bollard Grips is made from aluminium and is designed for tensile testing up to 100 N of delicate, flexible specimens such as fine threads, wires and yarns, which may break easily when clamped.
The specimen is wrapped around the…
187
Accessory
Large Circular Bollard Grip, 2 kN, QC-20 fitting
432-271
The Large Circular Bollard Grips is made from steel and is designed for tensile testing up to 2 KN of flexible wire-type materials with a maximum specimen thickness width of 2 mm.
The specimen is wrapped around the bollard and the free end is clamped…
188
Accessory
Large Pneumatic Plane Grips, pyramid-faced jaws, 1 kN, Pair, QC-20 fitting
432-276
A pair of pneumatically-operated, single-action Large Pneumatic Plane Grips with an opening of 0-14 mm.
Each 30mm high x 51mm wide jaw is fitted with a pyramidal surface to secure specimens tightly. The specimen is held between the fixed jaw and the…
189
Accessory
Heavy-duty Belt Grips, 10 kN, QC-20 fitting
432-277
Heavy-duty Belt Grips are designed for tensile testing of high strength belts and straps such as conveyor belts, which require special grips to prevent specimen slippage.
By winding the belt around the split bodies the stresses in the sample are…
190
Accessory
Large Pinch Grip, 500 N, M6
432-278
The Large Pinch Grip is fitted with 10mm high x 25mm wide cross-hatch jaw faces to ensure samples are held securely for tensile tests below 500 N.
One jaw is fixed and the other jaw is on a spring-loaded hinge which opens to 15mm. Fast installation and…
191
Accessory
Lightweight Mini Vice Grip, 5 N, M6
432-281
By virtue of its spring loaded clamping action the Lightweight Mini Vice Grip is ideal for testing ultra low forces.
Weighing only 30 g it holds specimens without the need to tighten jaws by a thread, which may damage low-capacity loadcells or even the…
192
Accessory
‘T’ slot Base Plate
432-294
‘T’ slot base plate (replaces the standard base plate on single-column motorised test stands).
For use with specialist fixtures such as 1kN 3-point Bend Jig (432-294)
Includes ‘T’ bolt fittings.
193
Accessory
Lower Torque Fixing Table, Vortex stands
432-320
Lower Torque Fixing Table.
Offers highly versatile holding of containers and specimens when torque testing. Fully adjustable between 10 - 190 mm opening (diameter) to accommodate a variety of forms.
Four rubber-coated, threaded pegs are supplied as…
194
Accessory
Upper Torque Fixing Table for Vortex stands
432-321
Upper Torque Fixing Table.
Offers highly versatile holding of specimens when torque testing. Fully adjustable between 10 - 78mm opening to accommodate a variety of forms.
Four rubber-coated, threaded pegs are supplied as standard which screw into…
195
Accessory
Radiused Probe - 8 mm, 500 N, 10-32 UNF
432-354
Radiused Probes are used to perform penetration or puncture tests on a wide range of products.
Aspects measured include firmness and ripeness of cosmetics, medical gels and foodstuffs.
6mm diameter at the tip rising to 8mm outer diameter of the probe.…
196
Accessory
Radiused Probe - 11 mm, 500 N, 10-32 UNF
432-355
Radiused Probes are used to perform penetration or puncture tests on a wide range of products.
Aspects measured include firmness and ripeness of cosmetics, medical gels and foodstuffs.
8mm tip rising to 11mm outer diameter. Fitted with 10-32 UNF female…
197
Accessory
Inverted Chisel Point - Ø 8 mm, 500 N, 10-32 UNF
432-356
For compression testing of cylindrical or wire specimens up to 500 N.
Specimen is located centrally within the inverted V-shape and compressed to a set distance or a break.
Fitted with a 10-32 UNF female thread for connection to loadcell
198
Accessory
Inverted Chisel Point, Ø 12 mm, 5 kN, 5-16 UNC
432-357
For compression testing of cylindrical or wire specimens up to 5 kN.
Specimen is located centrally within the inverted V-shape and compressed to a set distance or a break.
Fitted with a 5-16 UNC female thread for connection to loadcell
199
Accessory
Cone Point - 8 mm diameter, 500 N, 10-32 UNF
432-358
A Cone Point probe of Ø 8mm with angle of 60°.
For compression testing of various components or materials up to 500 N.
Typically used where compressive force needs to be applied at a point or for penetration into a material over a short distance.…
200
Accessory
Cone Point - 12 mm diameter, 5 kN, 5-16 UNC
432-359
A Cone Point probe of Ø 12.7 mm with angle of 60°.
For compression testing of various components or materials up to 5 kN.
Typically used where compressive force needs to be applied at a point or for penetration into a material over a short distance.…