Search results
1326
[Page extract]
BS EN ISO 80369-20
These standards describes the methods for testing the performance of 6% Luer lock fittings including assembly, leak tightness, stress cracking, and separation force.
1327
[Page extract]
SAE AMSSTD
This standard covers the general requirements and methods for testing sandwich core materials and for testing sandwich construction of the types used primarily in aircraft structures.
1328
Case study
Pump dispenser bottle operation
Customised engineering example
As a method to dispense liquids and sprays propellants, such as pressurised gas, are avoided for many reasons. Dispensers with manual spring-loaded pumps are often used in their place.
1329
[Page extract]
BS 4863
Gives safety requirements for playpens for use by children up to 15kg in weight. It covers both rigid sided and mesh sided playpens.
1330
[Page extract]
ISO 2409
Describes a test method for assessing the resistance of paint coatings to separation from substrates when a right-angle lattice pattern is cut into the coating, penetrating through to the substrate.
1331
[Page extract]
ASTM C1292
This test method covers the determination of shear strength of continuous fiber-reinforced ceramic composites (CFCCs) at ambient temperature.
1332
Case study
การทดสอบการยืดตัวของถุงน้ำยาแช่
ความต้องการ Fresenius Kabi เป็นผู้ผลิตผลิตภัณฑ์ยาระดับโลกและระบบการจัดส่งสำหรับการบำบัดด้วยการแช่และโภชนาการทางคลินิก บริษัท จำเป็นต้องตรวจสอบความสามารถในการยืดตัวของฟิล์มโพลีโอเลฟินที่ใช้ในการผลิตภาชนะบรรจุสารละลายสำหรับแช่
1333
[Page extract]
ASTM D6117-18
ASTM D6117 covers the evaluation of fastener use with “as manufactured” plastic lumber and shapes through the use of two different testing procedures:
1334
Case study
Smoke grenade canister integrity
Customised engineering example
A manufacturer of smoke grenades required a means of testing the cap pull-off strength. The particular challenge was to grip the smooth metal cylinder for up to 5 kN of pulling force.
1335
[Page extract]
ASTM C1368
This test method covers the determination of slow crack growth (SCG) parameters of advanced ceramics by using constant stress-rate rectangular beam flexural testing, or ring-on-ring biaxial disk flexural testing, or direct tensile strength, in which str
1336
Case study
การทดสอบความตึงของฟิล์มพลาสติก
ความต้องการ ลูกค้าใช้ฟิล์มพลาสติกสองชั้นสำหรับฟิล์มบรรจุภัณฑ์สำหรับบรรจุอาหารสัตว์เลี้ยงและขนม พวกเขากำลังมองหาระบบที่ประหยัดค่าใช้จ่ายและเรียบง่ายในการวัดแรงที่ต้องใช้ในการแยกฟิล์มกว้าง 50 มม.
1337
[Page extract]
BS EN 1707
Syringes, Conical fittings (syringes), Injection instruments, Locking and locating devices, Fitting, Pipe fittings, Medical equipment, Medical instruments, Blood transfusion equipment, Dimensions, Dimensional tolerances, Performance testing, Leak tests,
1338
[Page extract]
ASTM D412-16
ASTM D412 is a test standard for testing the tensile stress-strain properties of thermoset rubbers and thermoplastic elastomers. The standard is divided into two test methods.
1339
[Page extract]
ASTM D6742 / D6742M
ASTM D6742 is the standard test method for tensile and compression testing of filled-hole polymer matrix composite laminates. It provides instructions for modifying open-hole tension and compression test methods to determine filled-hole tensile and com
1340
[Page extract]
*corp Mastercard CQM: ID-1
Mastercard CQM requirement covers Peel Strength Test (TM-412 #8120#) and Advanced Peel Strength Test (TN-424 #8240#). Methods are based around ISO 10373-1 to determine the peel strength between 2 layers of an ID or security card.
1341
[Page extract]
BS EN ISO 9626
This International Standard specifies the dimensions, surface and mechanical properties of normal- and thin-walled tubing of designated metric sizes 3,4 mm to 0,3 mm, and of extra-thin-walled tubing of designated metric sizes 2,1 mm to 0,6 mm.
1342
Case study
การยุติการเชื่อมต่อด่วนแบบแบน
ความต้องการ จำเป็นต้องมีระบบทดสอบเพื่อให้เป็นไปตามข้อกำหนดของมาตรฐานการทดสอบ BS5057 ข้อกำหนดจำเป็นต้องมีการวัดการแทรกครั้งแรกและแรงดึงที่หกบนจอบตัวผู้เข้ากับขั้วต่อตัวเมีย (ตามที่ใช้กันทั่วไปในอุตสาหกรรมยานยนต์สินค้าสีขาวและสีน้ำตาล) ความลึกของ
1343
Case study
หัวฉีดอลูมิเนียมแรงตัดงอ
ความต้องการ ซัพพลายเออร์อุปกรณ์และส่วนประกอบก๊าซทางการแพทย์รายใหญ่ระดับโลกต้องการการทดสอบการควบคุมคุณภาพเพื่อประเมินส่วนหนึ่งของผลิตภัณฑ์ใหม่ หนึ่งในส่วนประกอบของพวกเขาคือกระบอกอะลูมิเนียมแรงดัน 5 มล.
1344
Case study
ไม้สำหรับทดสอบการงอและลอกพื้นขนาดใหญ่สำหรับเฟอร์นิเจอร์และพื้น
ความต้องการ Klaipedos Mediena ของลิธัวเนียเป็นผู้ผลิตเฟอร์นิเจอร์ไม้ชั้นนำในลิทัวเนีย มีความเชี่ยวชาญในการเคลือบและเคลือบลามิเนตบอร์ด (FPB) ซึ่งผลิตขึ้นเพื่อ IKEA ยักษ์ใหญ่แห่งสวีเดนที่ส่งมอบตู้ครัวมากกว่า 5 ล้านตู้ต่อปี
1345
Case study
การประยุกต์ใช้ฝาปิดฝาจ่ายของเหลวอุตสาหกรรมและแรงกำจัด
ความต้องการ จำเป็นต้องมีระบบในการวัดแรงกดและแรงดึงของฝาฉีดขึ้นรูปจากกระป๋องน้ำมันที่ออกแบบใหม่
1346
Software
ซอฟต์แวร์ VectorPro MT
ซอฟต์แวร์ VectorPro® MT VectorPro MT คือชุดซอฟต์แวร์ทดสอบวัสดุขั้นสูงที่พัฒนาขึ้นเพื่อดำเนินการทดสอบแรงดึง แรงเฉือน แรงดัด และแรงอัดของวัสดุต่างๆ มากมาย นำเสนอข้อมูลการวัดในรูปแบบกราฟิกและออกรายงานการทดสอบที่กำหนดเอง เพียงเลือกโหลดเซลล์ ELS และชุดกริป…
1347
Case study
การทดสอบการรับรองความปลอดภัยในการก่อสร้าง
ความต้องการ IPS Safety Netting จัดหาและติดตั้งมุ้งนิรภัยหลายพันตัวสำหรับอุตสาหกรรมก่อสร้าง อวนใช้สำหรับจับการตกและเพื่อป้องกันเศษที่ตกลงมา ตาข่ายแต่ละชิ้นได้รับการติดตามซ่อมแซมและทดสอบความแข็งแรงโดยเทียบกับเกณฑ์การถอนของผู้ผลิตและมาตรฐานอุตสาหก
1348
Case study
ภาชนะบรรจุของเหลวมอเตอร์สไตล์พลาสติกพื้นผิวซีลกาวลอก
ความต้องการ Bullsone เป็นผู้ผลิตผลิตภัณฑ์ดูแลรถยนต์ชั้นนำของเกาหลี พวกเขานำเสนอผลิตภัณฑ์ทำความสะอาดและถนอมชิ้นส่วนที่ใช้กับตัวถังภายนอกและตัวถังภายในที่หลากหลาย Bullsone มีความมุ่งมั่นอย่างมากต่อสิ่งแวดล้อมและผลิตภัณฑ์ของ บริษัท สนับสนุนการริ
1349
Case study
PCB บัดกรีร่วมเฉือน
ความต้องการ Millennnium Microtech Thailand เป็นส่วนหนึ่งของ Microchip Technology Inc Thailand ประกอบกิจการผลิตบรรจุภัณฑ์และทดสอบส่วนประกอบวงจรรวม (PCB) วงจรพิมพ์ (PCB) บริษัท ต้องการทำการทดสอบแรงเฉือนบนข้อต่อบัดกรีแบบยึดพื้นผิวด้วยวิธีที่รวดเ
1350
Case study
ความแข็งแรงของแท็กระบุตัวสัตว์และการทดสอบการถอดชิ้นส่วน
ความต้องการ สหพันธ์โคแห่งเดนมาร์กและ RYK สาขาการค้ามีหน้าที่บันทึกข้อมูลโคนมร้อยละ 98 ของฝูงสัตว์ในเดนมาร์ก ทำงานอย่างใกล้ชิดกับคณะกรรมการระหว่างประเทศว่าด้วยการบันทึกสัตว์ (ICAR) และต้องมีการทดสอบคุณภาพที่ดีขึ้นของความต้านทานแรงดึงของแท็กระบ