Search results
1326
[Page extract]
SAE AMSSTD
This standard covers the general requirements and methods for testing sandwich core materials and for testing sandwich construction of the types used primarily in aircraft structures.
1327
[Page extract]
BS EN ISO 80369-20
These standards describes the methods for testing the performance of 6% Luer lock fittings including assembly, leak tightness, stress cracking, and separation force.
1328
[Page extract]
BS 4863
Gives safety requirements for playpens for use by children up to 15kg in weight. It covers both rigid sided and mesh sided playpens.
1329
[Page extract]
ISO 2409
Describes a test method for assessing the resistance of paint coatings to separation from substrates when a right-angle lattice pattern is cut into the coating, penetrating through to the substrate.
1330
[Page extract]
ASTM D6117-18
ASTM D6117 covers the evaluation of fastener use with “as manufactured” plastic lumber and shapes through the use of two different testing procedures:
1331
[Page extract]
ASTM C1292
This test method covers the determination of shear strength of continuous fiber-reinforced ceramic composites (CFCCs) at ambient temperature.
1332
Case study
การทดสอบการยืดตัวของถุงน้ำยาแช่
ความต้องการ Fresenius Kabi เป็นผู้ผลิตผลิตภัณฑ์ยาระดับโลกและระบบการจัดส่งสำหรับการบำบัดด้วยการแช่และโภชนาการทางคลินิก บริษัท จำเป็นต้องตรวจสอบความสามารถในการยืดตัวของฟิล์มโพลีโอเลฟินที่ใช้ในการผลิตภาชนะบรรจุสารละลายสำหรับแช่
1333
[Page extract]
ASTM C1368
This test method covers the determination of slow crack growth (SCG) parameters of advanced ceramics by using constant stress-rate rectangular beam flexural testing, or ring-on-ring biaxial disk flexural testing, or direct tensile strength, in which str
1334
Case study
Smoke grenade canister integrity
Customised engineering example
A manufacturer of smoke grenades required a means of testing the cap pull-off strength. The particular challenge was to grip the smooth metal cylinder for up to 5 kN of pulling force.
1335
Case study
Pump dispenser bottle operation
Customised engineering example
As a method to dispense liquids and sprays propellants, such as pressurised gas, are avoided for many reasons. Dispensers with manual spring-loaded pumps are often used in their place.
1336
Case study
การทดสอบความตึงของฟิล์มพลาสติก
ความต้องการ ลูกค้าใช้ฟิล์มพลาสติกสองชั้นสำหรับฟิล์มบรรจุภัณฑ์สำหรับบรรจุอาหารสัตว์เลี้ยงและขนม พวกเขากำลังมองหาระบบที่ประหยัดค่าใช้จ่ายและเรียบง่ายในการวัดแรงที่ต้องใช้ในการแยกฟิล์มกว้าง 50 มม.
1337
[Page extract]
BS EN 1707
Syringes, Conical fittings (syringes), Injection instruments, Locking and locating devices, Fitting, Pipe fittings, Medical equipment, Medical instruments, Blood transfusion equipment, Dimensions, Dimensional tolerances, Performance testing, Leak tests,
1338
[Page extract]
ASTM D412-16
ASTM D412 is a test standard for testing the tensile stress-strain properties of thermoset rubbers and thermoplastic elastomers. The standard is divided into two test methods.
1339
[Page extract]
ASTM D6742 / D6742M
ASTM D6742 is the standard test method for tensile and compression testing of filled-hole polymer matrix composite laminates. It provides instructions for modifying open-hole tension and compression test methods to determine filled-hole tensile and com
1340
[Page extract]
*corp Mastercard CQM: ID-1
Mastercard CQM requirement covers Peel Strength Test (TM-412 #8120#) and Advanced Peel Strength Test (TN-424 #8240#). Methods are based around ISO 10373-1 to determine the peel strength between 2 layers of an ID or security card.
1341
[Page extract]
BS EN ISO 9626
This International Standard specifies the dimensions, surface and mechanical properties of normal- and thin-walled tubing of designated metric sizes 3,4 mm to 0,3 mm, and of extra-thin-walled tubing of designated metric sizes 2,1 mm to 0,6 mm.
1342
Case study
การยุติการเชื่อมต่อด่วนแบบแบน
ความต้องการ จำเป็นต้องมีระบบทดสอบเพื่อให้เป็นไปตามข้อกำหนดของมาตรฐานการทดสอบ BS5057 ข้อกำหนดจำเป็นต้องมีการวัดการแทรกครั้งแรกและแรงดึงที่หกบนจอบตัวผู้เข้ากับขั้วต่อตัวเมีย (ตามที่ใช้กันทั่วไปในอุตสาหกรรมยานยนต์สินค้าสีขาวและสีน้ำตาล) ความลึกของ
1343
Case study
หัวฉีดอลูมิเนียมแรงตัดงอ
ความต้องการ ซัพพลายเออร์อุปกรณ์และส่วนประกอบก๊าซทางการแพทย์รายใหญ่ระดับโลกต้องการการทดสอบการควบคุมคุณภาพเพื่อประเมินส่วนหนึ่งของผลิตภัณฑ์ใหม่ หนึ่งในส่วนประกอบของพวกเขาคือกระบอกอะลูมิเนียมแรงดัน 5 มล.
1344
Case study
ไม้สำหรับทดสอบการงอและลอกพื้นขนาดใหญ่สำหรับเฟอร์นิเจอร์และพื้น
ความต้องการ Klaipedos Mediena ของลิธัวเนียเป็นผู้ผลิตเฟอร์นิเจอร์ไม้ชั้นนำในลิทัวเนีย มีความเชี่ยวชาญในการเคลือบและเคลือบลามิเนตบอร์ด (FPB) ซึ่งผลิตขึ้นเพื่อ IKEA ยักษ์ใหญ่แห่งสวีเดนที่ส่งมอบตู้ครัวมากกว่า 5 ล้านตู้ต่อปี
1345
Case study
การประยุกต์ใช้ฝาปิดฝาจ่ายของเหลวอุตสาหกรรมและแรงกำจัด
ความต้องการ จำเป็นต้องมีระบบในการวัดแรงกดและแรงดึงของฝาฉีดขึ้นรูปจากกระป๋องน้ำมันที่ออกแบบใหม่
1346
Software
ซอฟต์แวร์ VectorPro MT
ซอฟต์แวร์ VectorPro® MT VectorPro MT คือชุดซอฟต์แวร์ทดสอบวัสดุขั้นสูงที่พัฒนาขึ้นเพื่อดำเนินการทดสอบแรงดึง แรงเฉือน แรงดัด และแรงอัดของวัสดุต่างๆ มากมาย นำเสนอข้อมูลการวัดในรูปแบบกราฟิกและออกรายงานการทดสอบที่กำหนดเอง เพียงเลือกโหลดเซลล์ ELS และชุดกริป…
1347
Case study
การทดสอบการรับรองความปลอดภัยในการก่อสร้าง
ความต้องการ IPS Safety Netting จัดหาและติดตั้งมุ้งนิรภัยหลายพันตัวสำหรับอุตสาหกรรมก่อสร้าง อวนใช้สำหรับจับการตกและเพื่อป้องกันเศษที่ตกลงมา ตาข่ายแต่ละชิ้นได้รับการติดตามซ่อมแซมและทดสอบความแข็งแรงโดยเทียบกับเกณฑ์การถอนของผู้ผลิตและมาตรฐานอุตสาหก
1348
Case study
ภาชนะบรรจุของเหลวมอเตอร์สไตล์พลาสติกพื้นผิวซีลกาวลอก
ความต้องการ Bullsone เป็นผู้ผลิตผลิตภัณฑ์ดูแลรถยนต์ชั้นนำของเกาหลี พวกเขานำเสนอผลิตภัณฑ์ทำความสะอาดและถนอมชิ้นส่วนที่ใช้กับตัวถังภายนอกและตัวถังภายในที่หลากหลาย Bullsone มีความมุ่งมั่นอย่างมากต่อสิ่งแวดล้อมและผลิตภัณฑ์ของ บริษัท สนับสนุนการริ
1349
Case study
PCB บัดกรีร่วมเฉือน
ความต้องการ Millennnium Microtech Thailand เป็นส่วนหนึ่งของ Microchip Technology Inc Thailand ประกอบกิจการผลิตบรรจุภัณฑ์และทดสอบส่วนประกอบวงจรรวม (PCB) วงจรพิมพ์ (PCB) บริษัท ต้องการทำการทดสอบแรงเฉือนบนข้อต่อบัดกรีแบบยึดพื้นผิวด้วยวิธีที่รวดเ
1350
Case study
ความแข็งแรงของแท็กระบุตัวสัตว์และการทดสอบการถอดชิ้นส่วน
ความต้องการ สหพันธ์โคแห่งเดนมาร์กและ RYK สาขาการค้ามีหน้าที่บันทึกข้อมูลโคนมร้อยละ 98 ของฝูงสัตว์ในเดนมาร์ก ทำงานอย่างใกล้ชิดกับคณะกรรมการระหว่างประเทศว่าด้วยการบันทึกสัตว์ (ICAR) และต้องมีการทดสอบคุณภาพที่ดีขึ้นของความต้านทานแรงดึงของแท็กระบ