Search results
376
Accessory
Webbing Grip, 2 kN, QC-20 fitting
432-269
Webbing Grips are designed for tensile testing of high strength belts and tapes below 2 kN.
The sample is wound around the knurled roller and then around the smooth roller. As load is applied, the smooth roller moves in the slot to secure tightly…
377
Accessory
Compression Plate, Nickel-Plated, 50 mm, 10-32 UNF
432-343
50mm nickel-plated compression plate featuring concentric circles for helping operators to place samples centrally. Fitted with 10-32 UNF female thread. Nickel-plated compression plates are resistant to rusting.
378
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 80 mm
Mec240k-BD80
Diamond Jaws (30mm x 80mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
379
Accessory
Compression Plate, Self-levelling, Hardened & Ground, 175 mm, 5-16 UNC
432-352
Self-levelling compression plates are ideal for general compression testing on a range of materials and finished products. Self-levelling allows parallelism to be set for those applications where it is critical to accurately measure the deformation of a…
380
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 30 mm opening, pair, QC-20 fitting
Mec240k-S30+Ko
MEC 240k- S30+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-30mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter…
381
Accessory
Upper Key-operated Chuck, square drive, for use with Vortex sensors
432-444
Upper ‘key-operated’ 4-jaw Chuck (small)
Fitted with a square-drive adapter for connection to 'Vortex' torque sensors. Supplied with dedicated chuck-key and 3 different sets of interchangeable jaws. Max.opening 50mm depending on jaws selected.
Used for…
382
Accessory
Mounting plate for QC-20 Male Post on 50 kN systems
432-622
Allows QC type C Adapter (20mm Male Post) to be fitted directly to the base of 50 kN test systems.
Used when QC-20 grips and fixtures are in long-term use on 50kN test stand.
Supplied with 6 screws of M6 thread.
383
Accessory
Compression Plate Square, Hardened Steel, 296 x 296 mm, QC-20 or QC-32 fitting
Mec36-296-St
MEC36-296-St:
Square compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Suitable for hard specimens such as metals, hard plastics, small stones and granules.
Dimensions: 296 x 296mm.…
384
Accessory
Wedge Grip for terminals for CrimpTest-1 kN
432-607
Wedge Grip for terminals for CrimpTest-1 Tester (supplied as standard with Tester)
The 1 kN Wedge Grip is ideal for tensile testing of flat crimp terminal and connectors when determining their pull strength.
A spring-loaded lever ensures the serrated…
385
Accessory
Lightweight Pneumatic Plane Grip, Single-action, 200 N, pair, QC-20 fitting
Mec94
A pair of versatile Lightweight Pneumatic Plane Grips especially suitable for holding a variety of materials where the tensile force may be low but the material is sensitive to damage or slippage when clamped.
The adjustable screw-driven rod allows…
386
Accessory
Blank (smooth) jaws for Mec83 U-Form Pneumatic Vice Grip, 5 kN, 40 x 100 mm
Mec83-B100
Blank Jaws (40mm x 100mm) - smooth steel jaw. Allows the user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = 0-10mm, 10-20mm or 20-30mm depending on which rod and piston are fitted to the Mec83 body.
Supplied as 0.5 set = 2…
387
Accessory
Pyramid (serrated) jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 60 mm
Mec154-BP
Pyramid Jaws (40mm high x 60mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 13 mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper…
388
Accessory
Square Perforated Aluminium Compression Plate, 200 x 200 mm, QC-20 or QC-32 fitting
Mec36L-200-L6x20
MEC36L-200-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 200mm x 200mm.
Fitted with QC-20mm or 32mm…
389
Accessory
Pyramid-faced jaws for 10 kN Wedge Grip, 40 x 34mm
MecS622-BP
Pyramid Jaws (40mm x 34mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
390
Accessory
Spring-loaded Pinch Grip with Chain Link, 10 N, QC-20 fitting
MecS205k
A Spring-loaded Pinch Grip designed for small-area contact (10mm x 10mm) to grip a delicate sample.
The sprung-loaded adjustable screw-mechanism allows an opening up to 3.4mm and acts in a pincer motion to secure specimens.
Fitted with a flexible chain…
391
Accessory
Compression Plate - Hardened Steel, 25 kN, 344 mm, QC-20 fitting
Mec23-344-20-St
MEC23-344-20-St :
Round compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Suitable for hard specimens such as metals, hard plastics, small stones and granules.
344mm diameter.
Fitted…
392
Accessory
Compression Plate Square, Hardened Steel, 396 x 396 mm, QC-20 or QC-32 fitting
Mec36-396-St
MEC36-396-St:
Square compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Also supplied with 4 fixing legs to support the weight of the steel plate. Suitable for hard specimens such as metals…
393
Accessory
Diamond coated jaws for Mec227 Lightweight Vice Grip, 100 N, 10 x 50 mm
Mec227-BD50
Diamond Jaws (10mm x 50mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0 - 8mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)…
394
Accessory
Pyramid jaws for Mec11-20 Scissor Grip, 10 kN, 25 x 100 mm
Mec11-20-BP100
Pyramid Jaws (25mm high x 100mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall. By using 100 mm width jaws tensile force is reduced to 10kN.
For materials which need a “bite” to secure a good grip (e.g. soft metals {…
395
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 30 mm
Mec240k-BD
Diamond Jaws (30mm x 30mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
396
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+2Ko
MEC 240k- S20+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow the test specimen…
397
Accessory
Pyramid (serrated) jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 25 mm
Mec227-BP25
Pyramid Jaws (10mm high x 25mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 8mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals - aluminium, copper, soft steel, paper and…
398
Accessory
Compression Plate, Nickel-Plated, 19 mm, 5-16 UNC
432-125
19mm nickel-plated compression plate fitted with 5-16 UNC female thread. Nickel-plated compression plates are resistant to rusting.
399
Accessory
Compression Plate - Hardened Steel, 25 kN, 344 mm, QC-20 fitting
Mec23-344-20-St
MEC23-344-20-St :
Round compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Suitable for hard specimens such as metals, hard plastics, small stones and granules.
344mm diameter.
Fitted…
400
Accessory
Adapter, 5 kN, 5-16 UNC to 5-16 UNC, F to F
432-293
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.