Search results
501
Event
Torque, force, and texture testing: How to elevate cosmetic quality standards
Cosmetic products require testing for objective texture analysis as well as the performance of applicators, dispensers, and packaging.
502
Accessory
Spring-Loaded Fold Grip, 2 kN, QC-20 fitting
432-262
Fitted with a 45mm wide roller cam having a cross-hatch knurled surface. The roller closes onto a serrated contact face of the grip body.
The specimen is folded around the knurled roller to give maximum contact area. As a load is applied to the…
503
Accessory
Large Circular Bollard Grip, 2 kN, QC-20 fitting
432-271
The Large Circular Bollard Grips is made from steel and is designed for tensile testing up to 2 KN of flexible wire-type materials with a maximum specimen thickness width of 2 mm.
The specimen is wrapped around the bollard and the free end is clamped…
504
[Page extract]
IEC 61210
IEC 61210:2010 applies to non-insulated flat quick-connect terminations consisting of a male tab of size 2,8 mm, 4,8 mm, 6,3 mm or 9,5 mm with hole or dimple detents and a mating female connector for use as either an incorporated or an integrated part o
505
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+2Ko
MEC 240k- S20+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow the test specimen…
506
Accessory
Filament Grip, 250 N, 10-32 UNF
432-363
The Filament Grip is designed for tensile testing up to 250 N of delicate, flexible specimens such as threads and yarns, which may break easily when clamped.
The specimen is wrapped around a grooved 13mm diameter bollard and the free end is clamped…
507
Accessory
Parallel Jaw Grip, 500 N, 10-32 UNF
432-396
Parallel Jaw Grips are designed for tensile testing up to 500N of thin flat components and materials, which require secure gripping over an extended surface area.
Star handles allow jaw positions to be adjusted to ensure central loading during tensile…
508
Accessory
Small Container Holder, 100 N, 10-78 mm
432-493
A versatile gripping fixture to hold containers when conducting low-force pull-off tests on closures and other fixings (eg. flip-cap lids).
4-pegs hold the container on an adjustable lead-screw and the knob secures the container tightly in place.…
509
Event
Essentials of GRIP & FIXTURE Selection in Force & Torque Testing Webinar
When physically testing a material or component, the ability to apply load to a test specimen is important—but having the ability to apply that load correctly is just as crucial.
510
Accessory
90-degree Peel Jig for FPT-H1
432-620
This 90-degree Peel Jig fits to the FPT-H1 for 90 degree peel testing of pressure sensitive tapes and labels in accordance with international standards.
FINAT FTM2, ASTM D330. PSTC 101 Method F.
It accepts interchangeable float glass and stainless steel…
511
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+Ko
MEC 240k- S20+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic piston.
This…
512
Accessory
3- & 4-point Bend Jig, 50 kN, Aluminium, QC-32 fitting
Mec22-360
MEC22 - A fully-configurable 50 kN Bend Jig in aluminium.
The main support beam has a bending span up to 330 mm and can bear a wide selection of interchangeable single-roller or dual-roller anvils to suit your specimen material.
A single upper anvil…
513
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+Ko
MEC 240k- S50+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
514
Accessory
Spring-loaded Pinch Grip with Chain Link, 10 N, QC-20 fitting
MecS205k
A Spring-loaded Pinch Grip designed for small-area contact (10mm x 10mm) to grip a delicate sample.
The sprung-loaded adjustable screw-mechanism allows an opening up to 3.4mm and acts in a pincer motion to secure specimens.
Fitted with a flexible chain…
515
Accessory
Wedge Grip, 10 kN, QC-20 fitting
MecS622
MecS622 (body only) :
Lever-action wedge grip with it's lever being positioned at the front for easy operation.
The open back of this wedge grip allows wider samples to be fitted, although still held across the central 34 mm width.
Supplied as body…
516
Accessory
Interface cable, AFG/AFTI (2006-now) to MultiTest-d / Vortex-d, RS232 & Control
351-074
Connects AFG/AFTI to MultiTest-d (data comms…
517
Accessory
Cone Probe, perspex, 45 degrees, M3
432-081
A perspex conical probe with 45° angle. Cone penetrometry is traditionally used within cosmetics and food products to assess hardness and spreadability. Also applicable for testing biscuits and other similar brittle products. Commonly used with extension…
518
Accessory
Film Grips, 500 N, 10-32 UNF
432-157
Used for flexible samples such as films, where conventional flat-faced grips may create stress points and so artificially reduce tensile strength. Samples are wrapped around the roller thereby spreading the load around the diameter.
Grips are supplied…
519
Accessory
Wedge Grip (small), 200 N, 10-32 UNF
432-415
The small, lightweight Wedge Grip is ideal for tensile testing below 200 N.
A spring-loaded lever ensures the serrated jaws (25mm wide x 20mm high) are easy to open for fast securing and release of samples. As load is applied, the self-tightening action…
520
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+Ko
MEC 240k +kO (body only) :
A pair of pneumatically-operated, Single-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
521
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+2Ko
MEC 240k- S20+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow the test specimen…
522
Accessory
Wedge Grip, 10 kN, QC-20 fitting
MecS622
MecS622 (body only) :
Lever-action wedge grip with it's lever being positioned at the front for easy operation.
The open back of this wedge grip allows wider samples to be fitted, although still held across the central 34 mm width.
Supplied as body…
523
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+2Ko
MEC 240k- S50+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
524
Accessory
3-Point Bend Jig, 2.5 kN, Aluminium, base plate
432-151
432-151 :- a simple 3-point bend jig supplied as standard with a 5mm radius upper anvil (M6 female thread connection) and two adjustable lower anvils also of 5mm radius. Lower support beam is fitted to a base plate suitable for Mecmesin motorised test…
525
Accessory
3- & 4-point Bend Jig, 50 kN, Aluminium, QC-32 fitting
Mec22-360
MEC22 - A fully-configurable 50 kN Bend Jig in aluminium.
The main support beam has a bending span up to 330 mm and can bear a wide selection of interchangeable single-roller or dual-roller anvils to suit your specimen material.
A single upper anvil…