HelixaPro 精密自動トルク試験機

ETS torque sensors

The Enhanced Torque Sensors (ETS) range of interchangeable torque sensors is specially adapted to the HelixaPro and VortexPro test systems.

They plug into the frame of the precision torque tester and their calibration characteristics are immediately recognised by the software without any input from the operator.

To ensure that you have the optimum selection to meet all your torque testing needs, eight different sensors are available. All sensors measure from zero and cover the range from 0.1 N.m right up to 10 N.m .

A range of grips, fixing tables and chucks is available to hold your specimens. Connection to each ETS sensor is via a ⅜" male square drive (ETS 0.3 - 10) or via a ¼" female hexagonal drive (ETS 0.1 - 0.2)

Sensor capacity, range and accuracy

Each sensor reads from zero to its full nominal capacity (listed below). Measurement accuracy is an outstanding ±0.5% of the sensor capacity.

^{*Not recommended for VortexPro
**Not recommended for HelixaPro}

Each sensor is delivered as standard with its own calibration certificate traceable to national standards.
 

Servicing and calibration

Mecmesin also provides annual servicing and torque sensor re-calibration. Talk to one of our engineers or your local national distributor to find out more.

Ask about servicing

ETS 0.1 - 0.2

Recommended for HelixaPro only. Fitted with a ¼" female hexagonal drive for connection to grips and test fixtures.

ETS 0.3 - 10

Interchangeable torque sensors for the HelixaPro and VortexPro. Fitted with a ⅜" male square drive for connection to grips and test fixtures.

ETS 15 - 30

For custom applications requiring torque measurement up to 30 N.m, the VortexPro test frame and sensor capacity can be customised to meet your test requirements.