Search results
476
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+2Ko
MEC 240k +2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
477
[Page extract]
ASTM E1012-12e1
It has been shown that bending stresses that inadvertently occur due to misalignment between the applied force and the specimen axes during the application of tensile and compressive forces can affect the test results.
478
Accessory
3- & 4-point Bend Jig, 2.5 kN, Aluminium, QC-20 fitting
Mec238
MEC238 - A small yet fully-configurable 2.5 kN Bend Jig in aluminium.
The main support beam has a bending span up to 150 mm and can bear a wide selection of interchangeable single-roller or dual-roller anvils to suit your specimen material.
A single…
479
Accessory
3- & 4-point Bend Jig, 50 kN, Aluminium, QC-32 fitting
Mec22-360
MEC22 - A fully-configurable 50 kN Bend Jig in aluminium.
The main support beam has a bending span up to 330 mm and can bear a wide selection of interchangeable single-roller or dual-roller anvils to suit your specimen material.
A single upper anvil…
480
Accessory
U-Form Pneumatic Vice Grip - Double Action, 2.5 kN, 18 mm opening, pair, QC-20 fitting
Mec240g+2Ko
MEC 240g +2kO (body only) :
A pair of pneumatically-operated, Double-action U-form Vice Grips with an opening of 0-18mm depending on the jaw types selected (sold separately).
Each grip is fitted with 2 x 70 mm diameter pneumatic pistons, which allow…
481
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+2Ko
MEC 240k- S20+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow the test specimen…
482
Accessory
Interface cable, AFG/AFTI (2006-now) to MultiTest-d / Vortex-d, RS232 & Control
351-074
Connects AFG/AFTI to MultiTest-d (data comms…
483
Accessory
U-Form Vice Grip - Double Action, 5 kN, 28 mm opening, QC-20 fitting
Mec240g
MEC 240g (body only):
A U-form Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
The ‘U-Form’ cut into the aluminium…
484
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 30 mm opening, pair, QC-20 fitting
Mec240k-S30+2Ko
MEC 240k- S30+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-30mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
485
Accessory
3-Point Bend Jig, 2.5 kN, Aluminium, base plate
432-151
432-151 :- a simple 3-point bend jig supplied as standard with a 5mm radius upper anvil (M6 female thread connection) and two adjustable lower anvils also of 5mm radius. Lower support beam is fitted to a base plate suitable for Mecmesin motorised test…
486
Accessory
Pinch Grip, 2 kN, QC-20 fitting
MecS470
The 2 KN Pinch Grip is fitted with 25mm high x 25mm wide pyramid jaw faces to ensure samples are held securely for tensile tests below 2 kN.
One jaw is fixed and the other jaw is on a spring-loaded hinge which opens to 10mm. Fast installation and…
487
Accessory
Spring-Loaded Fold Grip, 2 kN, QC-20 fitting
432-262
Fitted with a 45mm wide roller cam having a cross-hatch knurled surface. The roller closes onto a serrated contact face of the grip body.
The specimen is folded around the knurled roller to give maximum contact area. As a load is applied to the…
488
Accessory
Large Circular Bollard Grip, 2 kN, QC-20 fitting
432-271
The Large Circular Bollard Grips is made from steel and is designed for tensile testing up to 2 KN of flexible wire-type materials with a maximum specimen thickness width of 2 mm.
The specimen is wrapped around the bollard and the free end is clamped…
489
Accessory
CrimpTest-1 kN Calibration Bracket
432-671
The calibration bracket is designed for verifying the accuracy of the CrimpTest-1 kN loadcell readings. For the user, this ensures that a unit does not continue to be used with inaccurate readings across its range. The main bracket should be bolted to a…
490
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+2Ko
MEC 240k- S50+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
493
Accessory
Wedge Grip, 10 kN, QC-20 fitting
MecS622
MecS622 (body only) :
Lever-action wedge grip with it's lever being positioned at the front for easy operation.
The open back of this wedge grip allows wider samples to be fitted, although still held across the central 34 mm width.
Supplied as body…
494
Accessory
Force Gauge Gripping Cradle, 2.5 kN
432-388
Allows force gauges to be used as a rigid hand-held instrument (mounting screws supplied).
The dual-handle cradle allows the comfortable application by hand of push/pull loads.
For use with a BFG or AFG digital force gauge.
Commonly used for manual-…
495
Accessory
3- & 4-point Bend Jig, 50 kN, Steel, QC-32 fitting
Mec103-cgr
MEC103 - A compact yet fully-configurable 50 kN Bend Jig in steel.
The main support beam attaches to the base of the test frame and has a bending span up to 120 mm. It can accept a wide selection of interchangeable single-roller or dual-roller anvils to…
496
Event
Essentials of Grip & Fixture Selection
The accuracy of instrument itself- though important, is only one piece of the measurement accuracy puzzle. Grip and fixture selection plays a critical role in the applications in Force and Materials quality testing.
497
Accessory
90-degree Peel Jig for FPT-H1
432-620
This 90-degree Peel Jig fits to the FPT-H1 for 90 degree peel testing of pressure sensitive tapes and labels in accordance with international standards.
FINAT FTM2, ASTM D330. PSTC 101 Method F.
It accepts interchangeable float glass and stainless steel…
498
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+2Ko
MEC 240k +2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
499
Accessory
Spring-loaded Pinch Grip with Chain Link, 10 N, QC-20 fitting
MecS205k
A Spring-loaded Pinch Grip designed for small-area contact (10mm x 10mm) to grip a delicate sample.
The sprung-loaded adjustable screw-mechanism allows an opening up to 3.4mm and acts in a pincer motion to secure specimens.
Fitted with a flexible chain…
500
Accessory
Filament Grip, 250 N, 10-32 UNF
432-363
The Filament Grip is designed for tensile testing up to 250 N of delicate, flexible specimens such as threads and yarns, which may break easily when clamped.
The specimen is wrapped around a grooved 13mm diameter bollard and the free end is clamped…