Search results
1051
Accessory
3-Jaw Popper Pull-off Fixture, 500 N, 10-32 UNF
432-409
The 3-Jaw Popper Pull-Off Fixture is supplied fitted to a short chain link assembly having a 10-32 UNF female thread. It is used for to securely holding 13-15 ligne press-studs ('poppers') when carrying out pull-off "test-to-failure" tests.
Typically…
1052
Accessory
Clevis Grip (Large) c/w quick-release pin, 5 kN, M12
432-443
Large Clevis Grip c/w quick-release pin.Fitted with female M12 thread.
Used for testing heavy duty tension springs and securing odd-shaped parts when testing tensile forces below 5 kN.
1053
Accessory
V-jaw vice clamp, four jaws on screw-action adjuster, QC-20 fitting
432-678
432-678 is a vice fixture for mounting to the base of a test stand when performing tension and compression tests. It has four jaws, with two jaws being vertically spaced on either side. This provides increased stability by clamping at alternate heights on…
1054
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+Ko
MEC 240k- S50+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
1055
Accessory
Extension Rod, 130 mm, 500N, 10-32 UNF
432-117
Extension rod 130mm long supplied with locking nut to ensure alignment of grip. Comprises 10-32 UNF female to 10-32 UNF male threads.
Suitable for use with digital force gauges made from 1990 - 2006.
1056
Accessory
Automated Syringe Batch Tester
PDV19179
The Automated Syringe Batch tester is a bench-top system for checking the ‘break-loose’ and ‘glide force’ of up to 12 individual syringes in one ‘load-and-run’ cycle. In the face of increased demand on production of syringes, this system enables larger…
1057
Accessory
Popper Cam Base, 1 kN, 10-32 UNF
432-179
The Popper Cam Base is used to secure the fabric when testing the strength of press studs ('poppers'), particularly on children’s clothing.
It is secured to the base of the test stand and the popper is fed through the retaining hole and positioned over…
1058
Accessory
Pin Chuck, 100 N, 10-32 UNF
432-382
Pin chucks are specifically designed for gripping circular or rod-type specimens of diameters between 0.5 - 3.5mm.
For tension and compression testing below 100N.
Fitted with adaptor having 10-32 UNF female threaded hole & 10-32 UNF grub-screw
1059
Accessory
Interface cable, AFG/AFTI to MultiTest-dV, Stand reverse & RS232
351-103
Interface cable, AFG to MultiTest-dV (May 2020 - now) test stands & Vortex-dV (June 2020 -now) for stand reverse and RS232 data transfer to stand for onward use with VectorPro-Lite software.
Comprises a 15-pin D-socket to 15-pin D-plug.
1060
Accessory
FPT-H1 loadcell calibration checking kit
432-635
For checking the calibration accuracy of loadcell type HILC used on the FPT-H1 Friction-Peel-Tear Tester.
Comprises a fixing plate with pulley, bench clamp and cord.
For use with Lightweight hanger and masses (part numbers 432-655 and 432-656).
1061
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+2Ko
MEC 240k- S50+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
1062
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+Ko
MEC 240k- S50+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
1063
Accessory
Extension Rod with nut, 30 mm, 500N, 10-32 UNF
432-116
Extension rod 30mm long supplied with locking nut to ensure alignment of grip. Comprises 10-32 UNF female to 10-32 UNF male threads.
Suitable for use with digital force gauges made from 1990 - 2006.
1064
Accessory
Pin Chuck, 100 N, M6
432-214
Pin chucks are specifically designed for gripping circular or rod-type specimens of diameters between 0.5 - 3.5mm.
For tension and compression testing below 100N.
Fitted with adaptor having M6 female threaded hole & M6 grub-screw
1065
Accessory
Large Pinch Grip, 500 N, M6
432-278
The Large Pinch Grip is fitted with 10mm high x 25mm wide cross-hatch jaw faces to ensure samples are held securely for tensile tests below 500 N.
One jaw is fixed and the other jaw is on a spring-loaded hinge which opens to 15mm. Fast installation and…
1066
Accessory
Inverted Chisel Point, Ø 12 mm, 5 kN, 5-16 UNC
432-357
For compression testing of cylindrical or wire specimens up to 5 kN.
Specimen is located centrally within the inverted V-shape and compressed to a set distance or a break.
Fitted with a 5-16 UNC female thread for connection to loadcell
1067
Accessory
Mettler Toledo RS-P26 printer (Euro)
432-503
A basic ticket printer with simple statistical analysis manufactured by Mettler Toledo.
Communicates with Mecmesin force gauges via RS232 serial link - order interface cable separately.
Supplied with mains-power adaptor 220V with plug (2-pin round)
Uses…
1068
Accessory
Wood Shear Test Jig, 25 kN, QC-20 or QC-32 fitting
Mec17
Wood Shear Tester DIN 52367, with torque-free shearing for wood samples according to ISO 6238, EN 392 and for glued laminated timber to BS 373. ASTM D143 version also available.
Connects to test stand and loadcell via QC 20mm or 32mm fixings. Please…
1069
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 30 mm opening, pair, QC-20 fitting
Mec240k-S30+Ko
MEC 240k- S30+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-30mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter…
1070
Accessory
Interface cable, BFG to MultiTest-d, RS232 data transfer only
351-076
Connects the BFG to a MultiTest-d for RS232 data comms transfer only.
Comprises 15-pin female D-connector to 25-pin male D-connector.
For transfer of data from MultiTest-d to PC, choose also either the 432-450 or 351-051 cables.
1071
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+2Ko
MEC 240k- S50+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
1072
Accessory
VFG/VFTI RS232 interface cable: 10-way Hirose socket to USB-A
351-109
VFG/VFTI RS232 interface cable for transmitting data in RS232 format
Comprises 10-way Hirose socket (F) to USB-A connectors
1073
Accessory
Cable Cam Grip (large serrated), 5 kN, M10 or M12
432-108
Designed for holding insulated cables and wire. The sample is secured by the serrated cam, which self-tightens as load is applied and minimises the chance of sample slippage.
The grip body features a clearance hole and is supplied with an M10 and M12…
1074
Accessory
Heavy-duty Belt Grips, 10 kN, QC-20 fitting
432-277
Heavy-duty Belt Grips are designed for tensile testing of high strength belts and straps such as conveyor belts, which require special grips to prevent specimen slippage.
By winding the belt around the split bodies the stresses in the sample are…
1075
Accessory
Inverted Chisel Point - Ø 8 mm, 500 N, 10-32 UNF
432-356
For compression testing of cylindrical or wire specimens up to 500 N.
Specimen is located centrally within the inverted V-shape and compressed to a set distance or a break.
Fitted with a 10-32 UNF female thread for connection to loadcell