Search results
1051
Accessory
Large Single-action Vice Grip, rubber-faced, 2 kN, QC-20 fitting
432-267-V01
A Large Single-action Vice Grip featuring one fixed jaw and one jaw as freely adjustable to mechanically clamp the specimen in place.
Rated to 2 kN in tension with rubber-faced jaws of 78mm wide x 28mm high having an opening of 0-9mm. Provides excellent…
1052
Accessory
Chisel Point - 8 mm diameter, 500 N, 10-32 UNF
432-360
Chisel Point probe of Ø 8mm with angle of 60° typically used for puncturing and splitting samples.
Maximum compressive force is 500 N.
Fitted with a 10-32 UNF female thread for connection to loadcell.
1053
Accessory
MultiTest 0.5 bellows assembly (1200 mm)
432-473
Optional bellows for the MultiTest 0.5 range of single-column test stands. Used to protect against dust and particle ingress and splash into the column.
Note that fitting of bellows reduces throat depth on test stand by 18mm.
Order with a MultiTest 0.5…
1054
Accessory
Interface cable, VTG Tornado/MultiTest-d/Vortex-d, RS232
351-051
Connects VTG Tornado, MultiTest-d or Vortex-d to a PC for RS232 data comms to VectorPro Lite software or to a serial printer.
Comprises 9-pin male to 9-pin female D connector.
1055
Case study
ISBT sports closure tension test
Requirement
The International Society of Beverage Technologists (ISBT) publish voluntary codes of practice for the technical and scientific aspects of soft drinks and beverages.
1056
Case study
Essais de flexion et de pelage à grande échelle sur bois pour meubles et sols
Exigence
Klaipedos Mediena basée en Lituanie est un important fabricant de meubles en bois.
1057
Event
Cork Pull & Cork Compression Testing OnDemand Webinar
FORCE TESTING in Wine & Spirit Applications
1058
Case study
Test de résistance à la rupture de fil de guidage pour DM
Exigence
La société est un fabricant de dispositifs médicaux DM et de composants médicaux en fil métallique, utilisés dans les dispositifs peu invasifs pour les applications cardio, endo et neurovasculaires.
1059
[Page extract]
Introduction to insertion and withdrawal testing
Insertion and withdrawal testing is a critical method for evaluating the performance, durability, and reliability of components that require secure and repeatable connections.
1060
[Page extract]
Mecmesin solutions for compressive shear testing
Mecmesin offers precision testing systems and fixtures designed for single- and double-shear configurations, suitable for a wide range of materials and load capacities.
1061
[Page extract]
Importance of testing elasticity and ultimate strength
Elasticity determines how well a material returns to its original shape after stretching. Ultimate strength indicates the maximum stress it can withstand before failure.
1062
[Page extract]
Best practice and future trends
Maintaining accuracy
Calibrate to ISO 6789 or Mecmesin protocols
Use in controlled environments
Validate with certified
1063
[Page extract]
Industry applications
Medical devices - Sterile packaging and protective barriers must resist both penetration and puncture to maintain sterility and patient safety.
Construction - Roofing membranes, concrete, and floor unde
1064
[Page extract]
Speak to an expert
The Delft tear test is a valuable tool for assessing material performance in applications where durability and safety are critical.
1065
[Page extract]
Standards for box crush testing
ASTM D642-00
This standard specifies methods for determining the compressive resistance of shipping containers, both filled and empty.
1066
[Page extract]
Speak to an expert
For advice on implementing five-point bend testing in your laboratory or production process, contact Mecmesin’s technical team.
1067
[Page extract]
Introduction to breaking torque tests
Breaking torque testing, also known as torque-to-failure is a critical mechanical test used to determine the point at which a component or assembly fails under rotational force.
1068
[Page extract]
Test setup and equipment
Performing lap shear testing under compression requires careful alignment and use of appropriate fixtures to prevent torsion or uneven load distribution.
1069
[Page extract]
Measuring compressive modulus
Common testing methods
Internationally recognised standards specify how compressive modulus is measured for different material types and applications:
1070
[Page extract]
Mecmesin solutions for equibiaxial flexure testing
Mecmesin designs and manufactures precision equipment for standards-compliant equibiaxial flexure compression testing, including the concentric ring method. Our systems combine robust mechanical design with advanced control and analysis software.
1071
[Page extract]
Common challenges in yield point testing
Specimen alignment issues
Misalignment during clamping can cause uneven stress distribution, resulting in inaccurate readings.
1072
[Page extract]
Applications in advanced ceramics and composites
Four-point bend testing is the preferred approach for assessing the flexural strength of advanced ceramics<
1073
[Page extract]
Introduction to strip method tensile testing
Among the range of tensile testing techniques, the strip method is widely recognised for its accuracy and repeatability.
1074
[Page extract]
Mecmesin solutions for Concora crush testing
Mecmesin offers advanced motorised test stands and fixtures for performing CCT in compliance with
1075
[Page extract]
Industry applications and case examples
Heavy industrial packaging - A manufacturer supplying boxes for machine components integrated routine CMT testing to track performance trends.