Search results
2701
[Page extract]
ASTM D6713-14
Materials shall be tested and the individual grades shall conform to specified values of the physical properties such as tensile strength, tensile elongation, tensile modulus, dimensional stability, flexural modulus, and Izod impact; and dimensional pro
2702
[Page extract]
BS 5081-1
A mechanical testing machine is used to move the syringe plunger and to aspirate and expel water, whilst the force exerted and the plunger travel are recorded.
2703
[Page extract]
ASTM D4776 / D4776M-18
ASTM D4776 is a test method used to determine the maximum adhesion force of tyre cords in rubber compounds.
2704
[Page extract]
ASTM D6264 /D6264M-17
In ASTM D6264 a quasi-static indentation (QSI) test method is used to obtain quantitative measurements of the damage resistance of a continuous-fibre-reinforced composite material to a concentrated indentation force
2705
[Page extract]
TAPPI T 807
This method describes a procedure for measuring the bursting strength of linerboard using a disk shaped diaphragm. Basis weights for this method should be 98 g/m (20#/MSF) and higher. The minimum burst should be 350 kPa (51 psi).
2706
[Page extract]
ASTM D3950
This specification covers nonmetallic strapping and joining methods for closing, reinforcing, and bundling materials for shipment, unitizing, palletizing, and bracing for car and truck loading.
2707
[Page extract]
ASTM D5934-02
ASTM D5934 specifies the use of controlled rate of loading mechanical instrumentation on rectangular plastic bars molded directly or cut from sheets, plates, or molded shapes via three-point loading bending techniques to obtain material properties such
2708
[Page extract]
BS EN 12209
BS EN 12209:2016 specifies requirements and test methods for the durability, strength, security, and function of mechanically operated locks and latches and their locking plates for use in doors, window doors and entrance doors in buildings.
2709
[Page extract]
BS 6319-7
BS 6319-7 is a test method for determining the tensile strength of resin and polymer/cement compositions for use in construction.
2710
Sensor
AFTI - Capteurs de force
Capteurs de force
L'afficheur AFTI et les dynamomètres AFG sont des indicateurs de force et de couple polyvalents conçus pour être utilisés avec la gamme de capteurs de force de traction et de compression «Smart» Mecmesin .
Les lectures sont affichées…
2711
[Page extract]
Éducation
Les solutions de test Mecmesin destinées à l’éducation constituent une introduction abordable et idéale à toutes les formes de test pour des cours de conception, de science des matériaux, d’ingénierie et même de physiologie.
2712
[Page extract]
Transport
Mecmesin solutions for transport engineering and design.
Transport engineering involves massive complexity, combined with the most stringent safety-critical features.
2713
[Page extract]
Jewellery & Watch
In jewellery and watch production, alloys, components and other materials must meet the needs of the manufacturing process and the end-product should give good service performance when worn by the customer.
2714
Software
TTT_Certify
TTT_Certify softwareGenerate compliant torque calibration certificates
Included with the TTT-300 is our TTT_Certify software for generating calibration certificates, conforming to ISO 17025 standards for handheld, indicating and click torque tools, such…
2715
Software
TTT_Certify
Logiciel TTT_Certify Générer des certificats d'étalonnage de couple conformes Le logiciel TTT_Certify est inclus avec le TTT-300 pour générer des certificats d'étalonnage, conformément aux normes ISO 17025 pour les outils dynamométriques portables…
2716
Sensor
Capteurs - Vortex
Capteurs de couple
La gamme de capteurs de couple interchangeables ITC spécialement adaptée au système de test Vortex. Plug-and-play pour l'étalonnage automatique et une gamme de capacités pour toutes les exigences, mesurant de 0 à 0,3 Nm (0 - 2,7 lbf.in…
2717
[Page extract]
Bijouterie et Horlogerie
Dans la fabrication de bijoux et de montres, les alliages, composants et autres matériaux doivent répondre aux besoins du processus de fabrication et le produit final doit offrir de bonnes performances de service lorsqu'il est porté par le client.
2718
Page
Politique de confidentialité
Mecmesin est un nom commercial de PPT Group UK Ltd. Votre vie privée est d'une grande importance pour Mecmesin et nous nous engageons à protéger les informations personnelles que vous partagez avec nous.
2719
[Page extract]
Précision
HelixaPro et HelixaPro Touch sont conçus pour les applications difficiles où les forces de couple peuvent être très faibles et où la précision est la priorité, de 1 mN.m à 6 Nm.
2720
[Page extract]
Polyvalence
Le testeur de couple Vortex a été conçu pour être polyvalent. Sa configuration standard est évaluée à 10 Nm (90 lbf.in) avec un espace pour accepter des échantillons jusqu'à 275 mm de large.
2721
[Page extract]
Versatility
The Vortex torque tester has been designed for versatility. Its standard configuration is rated to 10 N.m (90 lbf.in) with space to accept specimens up to 275mm wide.
2722
[Page extract]
Precision
HelixaPro and HelixaPro Touch are designed for challenging applications where torque forces may be very small and accuracy is the priority, from 1 mN.m up to 6 N.m.
2723
[Page extract]
Science & Technologie
Les entreprises scientifiques et technologiques agissent souvent comme une interface entre les entreprises et les centres de connaissances tels que les universités, les laboratoires financés par le gouvernement et, dans certains cas, les laboratoires d’
2724
[Page extract]
Pinces ciseaux
Pinces ciseaux - auto-serrants et alignés sur l'éprouvette maintenue initialement par la tension du ressort.
2725
[Page extract]
Pinces-étau (mécanique)
Pinces-étau (simple action) - ayant une mâchoire fixe contre laquelle une deuxième mâchoire parallèle est serrée. La position de la face fixe peut être ajustée pour s'adapter à différentes épaisseurs de spécimens.