Search results
826
Accessory
V-jaws for Mec240g U-Form Vice Grip, 5 kN, for round sample Ø 2-50 mm
Mec240g-BV2
V-Jaws (2-50mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes)
Supplied as 0.5 set = 2 jaws (…
827
Accessory
V-jaws for 10kN Wedge Grip, for round samples 2 - 10 mm
MecS622-BV
V-Jaws (2-10mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove. For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes). Supplied as 0.5 set = 2 jaws (…
828
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 80 mm
Mec240k-BD80
Diamond Jaws (30mm x 80mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
829
Accessory
Pyramid (serrated) jaws, 30 x 80 mm, 0.5 set
Mec240k-BP80
Pyramid Jaws (30mm x 80mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
830
Accessory
Diamond coated jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 80 mm
Mec240g-BD80
Diamond Jaws (30mm x 80mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
831
Accessory
V-jaws for Mec240g U-Form Vice Grip, 5 kN, for round sample Ø 5-50 mm
Mec240g-BV5
V-Jaws (5-50mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods,
tubes)
Supplied as 0.5 set = 2 jaws (…
832
Accessory
Compression Plate, Nickel-Plated, 12 mm, 10-32 UNF
432-119
12mm nickel-plated compression plate fitted with 10-32 UNF female thread. Nickel-plated compression plates are resistant to rusting.
833
Accessory
MDD scale bracket kit
432-160
Bracket Set only.
Used for mounting of a Mitutoyo ABS-type Digital Height Scale to the handwheel-operated Manual Test Stand model MDD.
Note: Height-scale not included
834
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 80 mm
Mec240k-BD80
Diamond Jaws (30mm x 80mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
835
Accessory
Extension Rod, 130 mm, 500 N, M6
432-187
130mm long Extension Rod M6 female to M6 male. Fitted with knurled thumbwheel for locking accessory in correct orientation.
836
Accessory
Pyramid (serrated) jaws, 30 x 80 mm, 0.5 set
Mec240k-BP80
Pyramid Jaws (30mm x 80mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
837
Accessory
Flat Crush Test Upper and Lower Plates with Modified Anvil Plate and Self-Adjusting Adapter
PDV11089
A number of test methods and standards employed by various industry bodies call upon specific crush fixtures and associated accessories to be used in conjunction with a compression tester. The Flat Crush Test fixtures support the test piece on the lower…
838
Accessory
Lightweight Mini Vice Grip, 5 N, M6
432-281
By virtue of its spring loaded clamping action the Lightweight Mini Vice Grip is ideal for testing ultra low forces.
Weighing only 30 g it holds specimens without the need to tighten jaws by a thread, which may damage low-capacity loadcells or even the…
839
Accessory
Rubber coated jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 60 mm
Mec154-BG
Rubber-faced Jaws (40mm high x 60mm wide) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 32 mm.
For specimens which may get weakened by pinching at the contact-edge of the grip. (e.g. films, filaments, fibres and…
840
Accessory
Cable Cam Grip (small), serrated, 1 kN, 10-32 UNF
432-390
Cable Cam Grip - serrated, small
Designed for holding insulated cables and wire. The sample is secured by the cam, which self-tightens as a load is applied and spreads the load evenly.
Serrated cams are preferred for materials which may be slippy and…
841
Accessory
Split Mandrel for Stelvin aluminium closure, mechanical
PDV14161
Half-round jaws with wire-eroded faces, for use with Vortex upper fixing plate (432-321). Specify closure diameter when ordering.
842
Accessory
Wave jaws for Mec154 Heavy-duty Vice Grip, 10kN, 60 x 200 mm
Mec154-BW200
Wave Jaws (60mm x 200mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = 0 - 22 mm.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).…
843
Accessory
Pin Chuck, 100 N, 10-32 UNF
432-382
Pin chucks are specifically designed for gripping circular or rod-type specimens of diameters between 0.5 - 3.5mm.
For tension and compression testing below 100N.
Fitted with adaptor having 10-32 UNF female threaded hole & 10-32 UNF grub-screw
844
Accessory
Trolley pushing fixture, 1 kN
432-405
The Trolley Pushing Fixture has been designed to attach to trolleys and wheelie bins, so that manual handling measurements can be made easily. Typically used with a force gauge grip handle.
845
Accessory
Pyramid (serrated) jaws for 20 or 50 kN Wedge Grip, 50 x 35mm, 4 - 16 mm opening
Mec243-BP16
Pyramid Jaws (50mm high x 35mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Jaw opening = 4 - 16mm.
For flat specimens of materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft…
846
Accessory
Diamond coated jaws for Mec227 Lightweight Vice Grip, 100 N, 10 x 25 mm
Mec227-BD25
Diamond Jaws (10mm x 25mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0 - 8mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)…
847
Accessory
Pyramid (serrated) jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 100 mm
Mec154-BP100
Pyramid Jaws (40mm high x 100mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 13 mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper…
848
Accessory
Diamond coated jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 25 mm
Mec94-BD25
Diamond Jaws (25mm high x 25mm wide) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = 0 - 20 mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and…
849
Accessory
Dual Handswitches (locking type) for pneumatic grips
Mec205-3
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-3:
Locking dual handswitches open the jaws of the grip by pushing the lever and remain open after…
850
Accessory
Rubber jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 25 mm
Mec94-BG25
Rubber-faced Jaws (25mm x 25mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 18mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…