Search results
1951
Accessory
Multi-Jaw Grip, 500 N, 10-32 UNF
432-420
Used in tension tests the Multi-Jaw Grip is for holding round and irregularly shaped specimens by clamping on the outer surface or under a 'head'.
By turning the body of the grip the claw-type jaws can be opened and closed to get a secure grasp on a…
1952
Accessory
Adapter, 5 kN, 5-16 UNC to M12, M to F
432-332
Male-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1953
Accessory
Compression Plate, Nickel-Plated, 50 mm, 10-32 UNF
432-343
50mm nickel-plated compression plate featuring concentric circles for helping operators to place samples centrally. Fitted with 10-32 UNF female thread. Nickel-plated compression plates are resistant to rusting.
1954
Accessory
Pyramid (serrated) jaws, 30 x 30 mm, 0.5 set
Mec240k-BP
Pyramid Jaws (30mm x 30mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1955
Accessory
Interface cable, VTG Tornado/MultiTest-d/Vortex-d, RS232
351-051
Connects VTG Tornado, MultiTest-d or Vortex-d to a PC for RS232 data comms to VectorPro Lite software or to a serial printer.
Comprises 9-pin male to 9-pin female D connector.
1956
Accessory
Sample cutter 15 mm wide
PSV13007
Sample cutter for preparing peel and tensile samples of film/paper. Adjustable blade spacing upto 70 mm, or quickly set at 15 mm or 1 inch wide with the width adjustment block.
Includes spare blades, width adjustment block and hardened protective mat on…
1957
Accessory
Interface cable, AFG/AFTI (Orbis Mk2/Tornado), 15-pin D socket to USB-A
351-086
Connects the AFG, AFTI (2006 - now), Orbis or Tornado (2008 - now) to the USB port of a PC for data transfer by RS232.
Comprises a 15-pin female D-connector to USB-A connector.
1958
Accessory
Extension Rod with thumbwheel, 30 mm, 5 kN, 5-16 UNC
432-008
30mm long Extension Rod 5-16 UNC female to 5-16 UNC male. Fitted with knurled thumbwheel for locking accessory in correct orientation.
1959
Accessory
Test Hook (small), 50 N, 10-32 UNF
432-118
Small Fixed Hook fitted with 10-32 UNF female thread. Used for general purpose tension tests.
1960
Accessory
Fabric Grip, 100 N, 10-32 UNF
432-384
Fabric grips are designed for tensile and elongation testing of fabric and thin materials below 100N.
Material is gripped between two smooth spring-loaded faces which are clamped together by two locking nuts at either side of the grip to ensure the…
1961
Accessory
Extension Rod, 25 mm, 500 N, M6 M to F
432-186
25mm long Extension Rod M6 female to M6 male. Fitted with knurled thumbwheel for locking accessory in correct orientation.
1962
Accessory
Adapter, 5 kN, 5-16 UNC to M12, M to M
432-331
Male-to-male Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1963
Accessory
Compression Plate, Hardened and Ground, 100 mm, 5-16 UNC
432-341
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
100mm diameter having 5-16 UNC female thread.
1964
Accessory
Large Chain Link Assembly (long) and Hook, 2.5 kN, 5-16 UNC
432-410
The large chain link assembly (long) and hook are used to attach to a variety of objects, which are otherwise difficult to hold.
The chain is 1 m long and is supplied with a clevis fastener at each end. Into one end is screwed a large test hook, which…
1965
Accessory
Compression Plate, Hardened and Ground, 175 mm, 5-16 UNC
432-446
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
175mm diameter having 5-16 UNC female thread.
1966
Accessory
Pyramid (serrated) jaws, 30 x 80 mm, 0.5 set
Mec240k-BP80
Pyramid Jaws (30mm x 80mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1967
Accessory
Toggle Clamps, 50 mm, serrated, 500 N, 10-32 UNF
432-176
Toggle Clamp (serrated)
An adjustable jaw can be positioned to ensure that symmetrical or asymmetrical specimens are aligned centrally. The other jaw is fitted to a toggle mechanism operated by a lever to allow rapid, easy clamping of specimens for…
1968
Accessory
Extension Rod with thumbwheel, 30 mm, 500N, M6 to 10-32 UNF
432-007
Extension rod 30mm long having 10-32 UNF female to M6 male threads.
Fitted with knurled thumbwheel for locking accessory in correct orientation.
1969
Accessory
Lower Torque Fixing Table, Vortex stands
432-320
Lower Torque Fixing Table.
Offers highly versatile holding of containers and specimens when torque testing. Fully adjustable between 10 - 190 mm opening (diameter) to accommodate a variety of forms.
Four rubber-coated, threaded pegs are supplied as…
1970
Accessory
3-Point Bend Jig, 2.5 kN, Aluminium, base plate
432-151
432-151 :- a simple 3-point bend jig supplied as standard with a 5mm radius upper anvil (M6 female thread connection) and two adjustable lower anvils also of 5mm radius. Lower support beam is fitted to a base plate suitable for Mecmesin motorised test…
1971
Accessory
TS torque screwdriver chuck, 3/8"
432-233
A standard self-centering 3-jaw chuck with key.
It has a maximum ⅜" (10mm) opening and is connected to the ‘TS’ screwdriver via a square drive spindle. Used to secure a variety of test specimens for torque applications of 1.5 - 10 N.m
1972
Accessory
Floating Peel Jig (ISO 10373-1), 500 N, 10-32 UNF
432-413
The Floating Peel Jig is used to test the peel strength between adhesive layers of flat, rigid samples such as credit cards.
A portion of the top layer is placed between the rollers and held in an upper grip (order separately). As load is applied the…
1973
Accessory
Adapter, 5 kN, 5-16 UNC to M6, F to F
432-330
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1974
Accessory
Lightweight Vice Grip - Double Action, 100 N, Opening 0-46mm, 10-32 UNF
Mec227-S46
MEC 227-S46 (body only):
A Lightweight Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
Rated to 100 N in tension with…
1975
Software
TTT_Certify
TTT_Certify softwareGenerate compliant torque calibration certificates
Included with the TTT-300 is our TTT_Certify software for generating calibration certificates, conforming to ISO 17025 standards for handheld, indicating and click torque tools, such…