Mecmesin | Search results

1351

^{[Page extract]}

BS ISO 3597-2

ISO 3597-2 specifies a method for determining the flexural strength of composite rods of circular cross-section made of roving-reinforced resin.

1352

Accessory

FPT-H1 loadcell calibration checking kit

432-635

For checking the calibration accuracy of loadcell type HILC used on the FPT-H1 Friction-Peel-Tear Tester. Comprises a fixing plate with pulley, bench clamp and cord. For use with Lightweight hanger and masses (part numbers 432-655 and 432-656).

1353

^{[Page extract]}

BS EN 12697-23

This standard specifies a test method for determining the (splitting) indirect tensile strength of cylindrical specimens of bituminous mixtures.

1354

^{[Page extract]}

PSTC 16

SCOPE1.1

1355

Accessory

Compression Plate - Aluminium, 10 kN, 196 mm, QC-32 fitting

Mec23-196-32-AL

MEC23-196-32-AL : Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc. 196mm diameter. Fitted with the QC-32mm female…

1356

^{[Page extract]}

DIN EN 1464

This European Standard specifies a floating roller method for the determination of the peel resistance of high-strength adhesive bonds between one rigid adherend and one flexible adherend when tested under specified conditions of preparation and testing

1357

Accessory

Compression Plate - Aluminium, 10 kN, 296 mm, QC-32 fitting

Mec23-296-32-AL

MEC23-296-32-AL : Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc. 296mm diameter. Fitted with the QC-32mm female…

1358

^{[Page extract]}

ISO 11608-5

This part of ISO 11608 specifies requirements and test methods for the automated functions of needle-based injection systems with automated functions (NIS-AUTO), for the administration of medicinal products in humans.

1359

Accessory

Cone Point - 12 mm diameter, 5 kN, 5-16 UNC

432-359

A Cone Point probe of Ø 12.7 mm with angle of 60°. For compression testing of various components or materials up to 5 kN. Typically used where compressive force needs to be applied at a point or for penetration into a material over a short distance.…

1360

Accessory

Fabric Grip, 200 N, 10-32 UNF

432-386

Fabric grips are designed for tensile and elongation testing of fabric and thin materials below 200N. Material is gripped between two smooth spring-loaded faces which are clamped together by two locking nuts at either side of the grip to ensure the…

1361

^{[Page extract]}

Bancs d'essais motorisés

Test de force répétable Vous recherchez un banc d'essai de traction ou de compression motorisé pour améliorer la précision et la répétabilité de vos mesures par rapport aux dyna

1362

Accessory

Mettler Toledo RS-P26 printer (Euro)

432-503

A basic ticket printer with simple statistical analysis manufactured by Mettler Toledo. Communicates with Mecmesin force gauges via RS232 serial link - order interface cable separately. Supplied with mains-power adaptor 220V with plug (2-pin round) Uses…

1363

Accessory

Compression Plate - Aluminium, 10 kN, 156 mm, QC-32 fitting

Mec23-156-32-AL

MEC23-156-32-AL : Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc. 156mm diameter. Fitted with the QC-32mm female…

1364

Accessory

Compression Plate - Aluminium, 10 kN, 246 mm, QC-32 fitting

Mec23-246-32-AL

MEC23-246-32-AL : Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc. 246mm diameter. Fitted with the QC-32mm female…

1365

Accessory

Compression Plate - Aluminium, 10 kN, 56 mm, QC-20 fitting

Mec23-56-20-AL

MEC23-56-20-AL : Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc. 56mm diameter. Fitted with the QC-20mm female connection…

1366

Accessory

Cone Point - 8 mm diameter, 500 N, 10-32 UNF

432-358

A Cone Point probe of Ø 8mm with angle of 60°. For compression testing of various components or materials up to 500 N. Typically used where compressive force needs to be applied at a point or for penetration into a material over a short distance.…

1367

Accessory

Fabric Grip, 100 N, 10-32 UNF

432-384

Fabric grips are designed for tensile and elongation testing of fabric and thin materials below 100N. Material is gripped between two smooth spring-loaded faces which are clamped together by two locking nuts at either side of the grip to ensure the…

1368

Accessory

Mettler Toledo RS-P26 printer (UK)

432-502

1369

Accessory

3-Point Bend Jig, 1 kN, Aluminium, T-slot base

432-248

A lightweight 3-point Bend Jig with 60 mm high upper and lower anvils of 1.5mm radius. Has a support span up to 120 mm. Ideal for most low-force bending and snapping applications. For use with T-slot base plate (432-294) - sold separately - to fit…

1370

Accessory

LTE 700 mm long travel extensometer2

432-700

Long Travel Extensometers (LTE) are designed to be used with Mecmesin test systems when running VectorPro MT materials testing software. They accurately measure strain directly from the test specimen to enable the most accurate calculation of the physical…

1371

Accessory

Compression Plate - Aluminium, 10 kN, 56 mm, QC-32 fitting

Mec23-56-32-AL

MEC23-56-32-AL : Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc. 56mm diameter. Fitted with the QC-32mm female connection…

1372

^{[Page extract]}

Systèmes d'essais de mesure de force

Avez-vous besoin d'un niveau de précision et de répétabilité impossible à atteindre par les bancs d'essais manuels?

1373

Accessory

Lower Key-operated Chuck, small, round shaft, fits Vortex spindle

432-496

Lower ‘key-operated’ 4-jaw Chuck (small) Fitted with a round shaft for connection to the motor spindle of 'Vortex' motorised test stands. Supplied with 3 different sets of interchangeable jaws. Max.opening 50mm depending on jaws selected. Used for…

1374

Event

Cap Closure and Removal Torque Testing

The primary objective for measuring and analyzing the torque characteristics of a container cap is to accurately determine not only the quality of the part or process, but also the root cause of a wide variety of defects.

1375