Search results
576
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 30 mm
Mec240k-BD
Diamond Jaws (30mm x 30mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
577
Accessory
Scissor Grip, 20 kN, QC-20 or QC-32 fitting
Mec11-20
MEC11-20 (Body only) :
Scissor-action grip rated to 20 kN fitted with either QC-20 or QC-32 connection.
Locking function allows the grip to remain open when inserting a specimen.
Spring tension provides enough clamping force to prevent the specimen…
578
Accessory
V-jaws for Mec154 Heavy-duty Vice Grip, 20kN, for round samples Ø 4-34 mm
Mec154-BV4
V-Jaws (4-34mm diameter with clamping height of 40mm) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes).…
579
Accessory
Compression Plate Square, Hardened Steel, 100 x 100 mm, QC-20 or QC-32 fitting
Mec36-100-St
MEC36-100-St:
Square compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Suitable for hard specimens such as metals, hard plastics, small stones and granules.
Dimensions: 100 x 100mm.…
580
Accessory
38 mm Crosshead extension only
432-508
The dovetailed crosshead-extension allows the loadcell on a single-column MultiTest stand to be positioned further from the column to accommodate larger test samples or to fit deeper grips without hitting the column.
Load rating of the test stand is…
581
Accessory
Compression Plate - Aluminium, 10 kN, 116 mm, QC-20 fitting
Mec23-116-20-AL
MEC23-116-20-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
116mm diameter.
Fitted with QC-20mm female connection…
582
Accessory
Compression Plate Square, Hardened Steel, 246 x 246 mm, QC-20 or QC-32 fitting
Mec36-246-St
MEC36-246-St:
Square compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Suitable for hard specimens such as metals, hard plastics, small stones and granules.
Dimensions: 246 x 246mm.…
583
Accessory
Compression Plate Square, Aluminium, 400 x 400 mm, QC-20 or QC-32 fitting
Mec36-400-AL
MEC36-400-AL:
Square compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
Dimensions: 400 x 400mm.
Fitted with QC-20mm or 32mm…
584
Accessory
Compression Plate - Aluminium, 10 kN, 196 mm, QC-32 fitting
Mec23-196-32-AL
MEC23-196-32-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
196mm diameter.
Fitted with the QC-32mm female…
585
Accessory
Self-levelling Compression Plate Steel - 196 mm, 50 kN, QC-32 fitting
MecS223g-196
MecS223g - 196mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel,…
586
Accessory
Compression Plate - Aluminium, 10 kN, 296 mm, QC-32 fitting
Mec23-296-32-AL
MEC23-296-32-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
296mm diameter.
Fitted with the QC-32mm female…
587
Accessory
Heavy-duty Textile Grip, 50 kN, QC-32 fitting
432-434
Heavy-duty Textile Grips are designed for tensile testing of high strength fabrics, textiles and webbing, which require special grips to prevent specimen slippage.
By winding the belt around the split bodies the stresses in the sample are distributed,…
588
Accessory
Compression Plate - Aluminium, 10 kN, 96 mm, QC-20 fitting
Mec23-96-20-AL
MEC23-96-20-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
96mm diameter.
Fitted with QC-20mm female connection.…
589
Accessory
Float glass plates (10 pieces), 2" x 8" for FINAT 2 Peel Table
PSV15030
A set of 10 pieces of 2" wide x 8" long (51 x 203mm) float-glass plates. Used to mount adhesive specimens on when testing tensile peel strength to the requirements of FINAT and other standards.
For use with the FINAT 2 Assisted Peel Table - part number…
590
Accessory
Compression Plate Rectangular, Aluminium, 125 x 250 mm, QC-20 or QC-32 fitting
Mec36-125x250-AL
MEC36-125x250-AL:
Rectangular compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
Dimensions: 125 x 250mm.
Fitted with QC-20mm or…
591
Accessory
Precision Lower Fixing Table for Helixa
432-600
Precision Lower Fixing Table for Helixa.
Mounts onto the base of Helixa precision torque testers. Fitted with a precision leadscrew and sprung-loaded runners into which jaws or holding pegs can be inserted (order separately). Tighten the knob to secure…
592
Accessory
Compression Plate Square, Aluminium, 300 x 300 mm, QC-20 or QC-32 fitting
Mec36-300-AL
MEC36-300-AL:
Square compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
Dimensions: 300 x 300mm.
Fitted with QC-20mm or 32mm…
593
Accessory
Self-levelling Compression Plate Steel - 156 mm, 50 kN, QC-32 fitting
MecS223g-156
MecS223g - 156mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel,…
594
Accessory
MLTE 1200 Long Travel Extensometer
432-843
The MLTE 1200 Long Travel Extensometer is designed to be used with Mecmesin test systems when running VectorPro MT materials testing software. It accurately measures strain directly from the test specimen to enable the most accurate calculation of the…
595
Accessory
Compression Plate, Nickel-Plated, 12 mm, 10-32 UNF
432-119
12mm nickel-plated compression plate fitted with 10-32 UNF female thread. Nickel-plated compression plates are resistant to rusting.
596
Accessory
Self-levelling Compression Plate Steel - 96 mm, 25 kN, QC-20 fitting
MecS223k-96
MecS223k - 96mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel…
597
Accessory
Compression Plate - Aluminium, 10 kN, 196 mm, QC-20 fitting
Mec23-196-20-AL
MEC23-196-20-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
196mm diameter.
Fitted with QC-20mm female connection…
598
Accessory
Test Hook (medium), 500 N, M6
432-169
Medium Fixed Hook fitted with M6 female thread. Used for general purpose tension tests.
599
Accessory
V-jaws for Mec154 Heavy-duty Vice Grip, 20kN, for round samples Ø 6-34 mm
Mec154-BV6
V-Jaws (6-34 mm diameter with clamping height of 40mm) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes)…
600
Accessory
Compression Plate - Aluminium, 10 kN, 296 mm, QC-20 fitting
Mec23-296-20-AL
MEC23-296-20-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
296mm diameter.
Fitted with QC-20mm female connection…