Search results
1426
Accesorio
Compression Plate, Rubber-Faced, 50 mm, 5-16 UNC
432-219
50mm nickel-plated compression plate featuring a rubber layer, which helps to prevent damage from metal-to-metal contact during a compression test.
Fitted with 5-16 UNC female thread.
Nickel-plated compression plates are resistant to rusting.
1427
Accesorio
Adapter, 5 kN, 5-16 UNC to 5-16 UNC, F to F
432-293
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1428
Accesorio
Crosshead for Vortex-d & -dV, without sensor
432-474
A complete crosshead assembly for the Vortex-d and Vortex-dV motorised torque test stands.
The assembly comprises:
crosshead with fixing knobs,
movable central carriage on rods including top-plate holder
torque sensor mounting plate - (Note: sensor…
1429
Accesorio
Spring-loaded Pinch Grip with Chain Link, 10 N, QC-20 fitting
MecS205k
A Spring-loaded Pinch Grip designed for small-area contact (10mm x 10mm) to grip a delicate sample.
The sprung-loaded adjustable screw-mechanism allows an opening up to 3.4mm and acts in a pincer motion to secure specimens.
Fitted with a flexible chain…
1430
Accesorio
Adapter, 5 kN, 5-16 UNC to M12, M to F
432-332
Male-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1431
Accesorio
Precision Lower Fixing Table for Helixa
432-600
Precision Lower Fixing Table for Helixa.
Mounts onto the base of Helixa precision torque testers. Fitted with a precision leadscrew and sprung-loaded runners into which jaws or holding pegs can be inserted (order separately). Tighten the knob to secure…
1432
Accesorio
Compression Plate, Nickel-plated, Vented by Slots & Flat, 50 mm, 10-32 UNF
432-346
Vented compression plates are ideal for top-load/crush testing of containers such as PET bottles.
Slots in the plate allow the passage of air to ensure that air inside the bottle is not compressed thereby falsifying the true measurement of the top-load…
1433
Accesorio
Orbis and Tornado Mk II/Vortex torque cell accuracy check rig
432-621
This bench-top unit enables the on-site verification of the calibration status of Orbis MkII, Tornado MkII testers, and static torque sensors rated from 1.5 N.m to 10 N.m. Using dead-weight masses, the kit allows you to quickly decide whether or not…
1434
Accesorio
Float glass plates (10 pieces), 2" x 8" for FINAT 2 Peel Table
PSV15030
A set of 10 pieces of 2" wide x 8" long (51 x 203mm) float-glass plates. Used to mount adhesive specimens on when testing tensile peel strength to the requirements of FINAT and other standards.
For use with the FINAT 2 Assisted Peel Table - part number…
1435
Accesorio
Self-levelling Compression Plate Steel - 96 mm, 50 kN, QC-32 fitting
MecS223g-96
MecS223g - 96mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel,…
1436
Accesorio
Lever-operated Cam Grip (small serrated), 500 N, 10-32 UNF
432-383
The small Lever-operated Cam Grip is designed with a plated 30mm wide roller cam to self-tighten as a load is applied to a sample, spreading the load evenly. The lever also allows for quick insertion and release of samples.
Fitted with a 10-32 UNF female…
1437
Accesorio
Interlock override plug
PDV12034-01
Plug for use with software-controlled "-i" and "-xt" systems. It allows an interlocked guard to be used in non-interlock mode.
Helps when first setting up trial test programmes.
1438
Accesorio
QC Type L Adapter, 32 mm M, c/w pin and fixing screws
432-451
QC Male Post 32mm c/w cross-pin, locking collar…
1439
Accesorio
Spring-Loaded Fold Grip, 2 kN, QC-20 fitting
432-262
Fitted with a 45mm wide roller cam having a cross-hatch knurled surface. The roller closes onto a serrated contact face of the grip body.
The specimen is folded around the knurled roller to give maximum contact area. As a load is applied to the…
1440
Accesorio
Scissor Grip, 20 kN, QC-20 or QC-32 fitting
Mec11-20
MEC11-20 (Body only) :
Scissor-action grip rated to 20 kN fitted with either QC-20 or QC-32 connection.
Locking function allows the grip to remain open when inserting a specimen.
Spring tension provides enough clamping force to prevent the specimen…
1441
Accesorio
Transit Case for Manual Handling/Ergonomic Kit
416-007
A foam-lined rugged metal case for the components of the advanced or basic manual handling kit. Supplied as standard with the kit, has space for: a force gauge including rechargeable batteries, mains adaptor / battery charger, gripping cradle, chain link…
1442
Accesorio
Radiused Probe - 8 mm, 500 N, 10-32 UNF
432-354
Radiused Probes are used to perform penetration or puncture tests on a wide range of products.
Aspects measured include firmness and ripeness of cosmetics, medical gels and foodstuffs.
6mm diameter at the tip rising to 8mm outer diameter of the probe.…
1443
Accesorio
Dual Handswitches (locking type) for pneumatic grips
Mec205-3
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-3:
Locking dual handswitches open the jaws of the grip by pushing the lever and remain open after…
1444
Accesorio
MDD Horizontal Feet Kit
432-126
Feet for the horizontal operation of an MDD manual test stand. Supplied as a pair.
1445
Accesorio
Medium Vice Grip - Single Action, 1 kN, 30 mm opening, QC-20 fitting
Mec240k-S30
MEC 240k-S30 (body only) :
A Medium Single-action Vice Grip allowing one jaw to be set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 1 kN in…
1446
Accesorio
Clevis Grip (small), 500 N, M6
432-216
Small Clevis Grip fitted with female M6 thread and supplied with male grub-screw.
Used for securing odd-shaped parts for testing tensile forces below 500N.
1447
Accesorio
Adapter, 5 kN, 5-16 UNC to M12, M to M
432-331
Male-to-male Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1448
Accesorio
Miniature Vice Grip, 100 N, QC-20 fitting
MecS341
Versatile, easy to use, and suitable for small components (eg bonded joints) where access is limited and tensile forces are below 100 N.
Clamping surfaces are machined with pyramid-shaped serrations to ensure optimum gripping force.
The flexible chain-…
1449
Accesorio
Compression Plate, Hardened and Ground, 100 mm, 5-16 UNC
432-341
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
100mm diameter having 5-16 UNC female thread.
1450
Accesorio
90-degree Peel Jig for FPT-H1
432-620
This 90-degree Peel Jig fits to the FPT-H1 for 90 degree peel testing of pressure sensitive tapes and labels in accordance with international standards.
FINAT FTM2, ASTM D330. PSTC 101 Method F.
It accepts interchangeable float glass and stainless steel…