Search results
1051
Accesorio
Pneumatic Medium Vice Grip - Double Action, 1 kN, 30 mm opening, pair, QC-20 fitting
Mec240k-S30+2Ko
MEC 240k- S30+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-30mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
1052
Accesorio
3- & 4-point Bend Jig, 50 kN, Aluminium, QC-32 fitting
Mec22-360
MEC22 - A fully-configurable 50 kN Bend Jig in aluminium.
The main support beam has a bending span up to 330 mm and can bear a wide selection of interchangeable single-roller or dual-roller anvils to suit your specimen material.
A single upper anvil…
1053
Accesorio
V-jaws for Mec240g U-Form Vice Grip, 5 kN, for round sample Ø 5-50 mm
Mec240g-BV5
V-Jaws (5-50mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods,
tubes)
Supplied as 0.5 set = 2 jaws (…
1054
Accesorio
Medium Vice Grip - Single Action, 2 kN, 20 mm opening, QC-20 fitting
Mec240k-S20
MEC 240k-S20 (body only) :
A Medium Single-action Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 2…
1055
Accesorio
Upper Torque Fixing Table for Vortex stands
432-321
Upper Torque Fixing Table.
Offers highly versatile holding of specimens when torque testing. Fully adjustable between 10 - 78mm opening to accommodate a variety of forms.
Four rubber-coated, threaded pegs are supplied as standard which screw into…
1056
Accesorio
Pneumatic Medium Vice Grip - Single Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+Ko
MEC 240k- S50+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
1057
Accesorio
Small Torque Saddle Plate
432-407
Saddle plates provide a more stable base on which to mount awkwardly-shaped samples when torque testing.
Can be used on the 1.5 N.m and 3 N.m 'Tornado' Manual Digital Torque Tester. Alternatively can be used with Fixing Plate (432-321) on 'Vortex'…
1058
Accesorio
Custom-made Safety Guards and Enclosures
PDVguard
Where the standard safety guard does not fulfil your application requirements, Mecmesin can work with you to design and produce a custom-made safety guard to meet your exact requirements. Suitable for any Mecmesin test stand. Previously-designed guards…
1059
Accesorio
Puños de bolardo de cincha
PDV8041
Las empuñaduras de bolardo de cincha proporcionan superficies lisas para soportar muestras en forma de cuerda, como redes y cinchas.
1060
Accesorio
Heavy-duty Vice Grip - Single Action, 10 kN, QC-20 fitting
Mec154-10
MEC 154-10 (body only - aluminium):
A Single-action Heavy-duty Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place…
1061
Accesorio
V-jaws for 20 & 50kN Wedge Grip, round samples 4-16 mm
Mec243-BV16
V-Jaws (4-16mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods,
tubes).
Supplied as 0.5 set = 2 jaws (…
1062
Accesorio
Interface cable, AFG/AFTI to MultiTest-dV / Vortex-dV, Stand reverse & RS232
351-092
Interface cable, AFG to MultiTest-dV (2003-April 2020)…
1063
Accesorio
Webbing Bollard Grips
PDV8041
Webbing bollard grips provide smooth surfaces to support rope-like specimens such as nets and webbing.
1064
Accesorio
V-jaw vice clamp, four jaws on screw-action adjuster, QC-20 fitting
432-678
432-678 is a vice fixture for mounting to the base of a test stand when performing tension and compression tests. It has four jaws, with two jaws being vertically spaced on either side. This provides increased stability by clamping at alternate heights on…
1065
Accesorio
Compression Plate, Hardened and Ground, 50 mm, M6
432-197
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
50mm diameter having M6 female thread.
1066
Accesorio
Flat Crush Test Upper and Lower Plates with Modified Anvil Plate and Self-Adjusting Adapter
PDV11089
A number of test methods and standards employed by various industry bodies call upon specific crush fixtures and associated accessories to be used in conjunction with a compression tester. The Flat Crush Test fixtures support the test piece on the lower…
1067
Accesorio
Compression Plate, Vented by Holes & Cone, 50 mm, 5-16 UNC
432-348
Vented compression plates are ideal for top-load/crush testing of containers such as PET bottles.
Holes in the plate allow the passage of air to ensure that air inside the bottle is not compressed thereby falsifying the true measurement of the top-load…
1068
Accesorio
Large Chain Link Assembly (short), 2.5 kN, 5-16 UNC
PSV8057
The Large Chain Link Assembly (short length) is fitted with a 5-16 UNC female thread and supplied with a male grub-screw.
It is fixed to other grips thereby allowing a flexible connection, which is often used for providing alignment when pulling large…
1069
Accesorio
3- & 4-point Bend Jig, 50 kN, Aluminium, QC-32 fitting
Mec22-360
MEC22 - A fully-configurable 50 kN Bend Jig in aluminium.
The main support beam has a bending span up to 330 mm and can bear a wide selection of interchangeable single-roller or dual-roller anvils to suit your specimen material.
A single upper anvil…
1070
Accesorio
Medium Vice Grip - Single Action, 1 kN, 30 mm opening, QC-20 fitting
Mec240k-S30
MEC 240k-S30 (body only) :
A Medium Single-action Vice Grip allowing one jaw to be set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 1 kN in…
1071
Accesorio
V-jaws for Mec154 Heavy-duty Vice Grip, 20kN, for round samples Ø 4-34 mm
Mec154-BV4
V-Jaws (4-34mm diameter with clamping height of 40mm) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes).…
1072
Accesorio
V-jaws for Mec240g U-Form Vice Grip, 5 kN, for round sample Ø 2-50 mm
Mec240g-BV2
V-Jaws (2-50mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes)
Supplied as 0.5 set = 2 jaws (…
1073
Accesorio
V-jaws for Mec240k Medium Vice Grip, 2.5 kN, for round samples Ø 3-52 mm
Mec240k-BV3
V-Jaws (3-52mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods,
tubes)
Supplied as 0.5 set = 2 jaws (…
1074
Accesorio
Lower Torque Fixing Table, Vortex stands
432-320
Lower Torque Fixing Table.
Offers highly versatile holding of containers and specimens when torque testing. Fully adjustable between 10 - 190 mm opening (diameter) to accommodate a variety of forms.
Four rubber-coated, threaded pegs are supplied as…
1075
Accesorio
Pneumatic Medium Vice Grip - Double Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+2Ko
MEC 240k- S50+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…