Search results
1551
[Page extract]
Compliance with industry standards
Mecmesin torque systems are engineered to comply with industry standards, including ASTM D7860-14 for chil
1552
[Page extract]
What is lap shear testing under compression?
Lap shear testing under compressive load is a mechanical test used to determine the strength of
1553
[Page extract]
Strain at maximum stress explained
Stress is the applied force, and strain is the resulting deformation. As a specimen is loaded, both stress and strain increase until stress reaches its peak value before the material starts to weaken.
1554
[Page extract]
How to conduct a floating roller peel test
Carrying out this test requires attention to detail and strict adherence to the procedure. Key steps include:
1555
[Page extract]
Methods of compressive burst testing
Inflationary burst testing
In this method, internal pressure is gradually increased using air, gas, or liquid until the container ruptures. This is widely applied to:
1556
Caso de estudio
Resistencia al desprendimiento de adherencia de las cintas y adhesivos COVID-19
Requisito A raíz del bloqueo de Covid-19, se han emitido pautas claras para las empresas sobre la seguridad del personal y los clientes.
1557
[Page extract]
Electrical switches and connectors
Switches and connectors may be low-cost simple electro-mechanical devices but they are ubiquitous in millions of products and devices we use every single day.
1558
[Page extract]
Wines & Spirits
Wine incites passion and has stirred the emotions for centuries. It demands attention. But it’s not just the wine itself which get us talking, it’s how it is packaged too; bottles and corks, bag-in-box containers, aseptic cartons and cans.
1559
Accesorio
Blank (smooth) jaws for Mec227 Lightweight Vice Grip, 100 N, 10 x 100 mm
Mec227-B100
Blank Jaws (10mm x 100mm) - smooth aluminium jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = 0 - 6mm.
Supplied as 0.5 set = 2 jaws (left…
1560
Producto
Comprobador de compresión
SqueezerPro
820-525
Diseñado para evaluar el rendimiento de los envases, SqueezerPro ofrece una potente visión del rendimiento de la resistencia a la compresión de diversos soportes de cartón, cierres, particiones interiores y otras variables de diseño críticas.
SqueezerPro…
1561
Accesorio
V-jaws for Mec11-20 Scissor Grip, 20 KN, Ø 4 - 15 mm diameter
Mec11-20-BV
V-Jaws (4-15mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
Grip opening to suit round samples of 10 - 48mm diameter where flat jaws do not provide enough surface contact (e.g. wires, rods,…
1562
Accesorio
V-jaws for Mec11-20 Scissor Grip, 20 KN, Ø 4 - 15 mm diameter
Mec11-20-BV
V-Jaws (4-15mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
Grip opening to suit round samples of 10 - 48mm diameter where flat jaws do not provide enough surface contact (e.g. wires, rods,…
1563
Accesorio
Blank (smooth) jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 50 mm
Mec227-B50
Blank Jaws (10mm x 50mm) - smooth aluminium jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = 0 - 6mm.
Supplied as 0.5 set = 2 jaws (left…
1564
Accesorio
Set of 4 fixing pegs for torque testers - 100mm high
432-250
Set of 100mm high extended-length gripping pegs.
These gripping pegs have a soft-rubber sleeve to clamp and keep taller samples secure and vertically aligned during torque testing.
Pegs are fitted with an M6 thread and attach to upper and lower…
1565
Accesorio
Mounting plate for QC-20 Male Post on 50 kN systems
432-622
Allows QC type C Adapter (20mm Male Post) to be fitted directly to the base of 50 kN test systems.
Used when QC-20 grips and fixtures are in long-term use on 50kN test stand.
Supplied with 6 screws of M6 thread.
1566
Accesorio
Blank (smooth) jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 25 mm
Mec227-B25
Blank Jaws (10mm x 25mm) - smooth aluminium jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = 0 - 8mm.
Supplied as 0.5 set = 2 jaws (left…
1567
Accesorio
QC Type M Loadcell Mounting Plate, 13 mm slot c/w M6 bolt for 100 N and 200 N S-beam loadcells
432-452
QC Type M Loadcell Mounting Plate c/w M6 bolt.
Fitted with 13 mm slot to suit 100 N and 200 N S-beam loadcells. The M6 bolt is used to secure the mounting plate onto the loadcell so that a QC type C Male Post (432-284) can be affixed to the loadcell.
1568
Accesorio
Blank (smooth) jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 50 mm
Mec94-B50
Blank Jaws (25mm high x 50mm wide) - smooth steel jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = 0 - 20 mm.
Supplied as 0.5 set = 2 jaws (left…
1569
Accesorio
Set of 4 fixing pegs for torque testers - 35 mm high
432-447
Set of standard 35mm high gripping pegs.
These gripping pegs have a soft-rubber sleeve to clamp and keep samples secure and vertically aligned during torque testing.
Pegs are fitted with an M6 thread and attach to upper and lower Torque Fixing Tables…
1571
Accesorio
Blank (smooth) jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 100 mm
Mec227-B100
Blank Jaws (10mm x 100mm) - smooth aluminium jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = 0 - 6mm.
Supplied as 0.5 set = 2 jaws (left…
1572
Accesorio
QC Type G Loadcell Mounting Plate, 25 mm slot c/w M16 bolt for 25 kN S-beam loadcell
432-288
QC Type F Loadcell Mounting Plate c/w M16 bolt.
Fitted with 25 mm slot to suit 25kN S-beam loadcell. The M16 bolt is used to secure the mounting plate onto the loadcell so that a QC type C Male Post (432-284) can be affixed to the loadcell.
1573
Accesorio
Blank (smooth) jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 25 mm
Mec94-B25
Blank Jaws (10mm high x 25mm wide) - smooth steel jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = 0 - 20 mm.
Supplied as 0.5 set = 2 jaws (left…
1574
Accesorio
Smooth jaws for Mec11-5 Scissor Grip, 5 kN, 20 x 50 mm
Mec11-5-B
Blank Jaws (20mm x 50mm) - smooth steel jaw. Allows user to machine or affix own surface.
Supplied as 0.5 set = 2 jaws (left & right). Order any combination of 2 half sets of jaws to fit into a pair of MEC11-5 Scissor Grips (upper & lower)
1575
Accesorio
Blank (smooth) jaws for Mec154 Heavy-duty Vice Grip, 20 kN, 40 x 100 mm
Mec154-B100
Blank Jaws (40mm high x 100mm wide) - smooth steel jaw.
Opening span = 0 - 34 mm.
Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Supplied as 0.5 set = 2 jaws (left…