Search results
2551
[Page extract]
ISO 1924-1
Applies, within the limitations of the instruments used, to all papers and boards with the exception of corrugated board, but may be applied to the components of such board. Specifies the method which causes failure of the piece in a mean time of 20 s.
2552
[Page extract]
CETIE Guide 4
This document concerns the crowning process, using crown caps for which the seal is provided by a plastic liner, onto glass finishes adapted to either "pry-off" or "twist crown" applications.
2553
Caso de estudio
PCB Cobre Track 90 grados de cáscara
Requisito Cambridge Nanotherm Ltd produce un sustrato único y tecnológicamente avanzado para la gestión térmica de componentes electrónicos.
2554
Caso de estudio
Prueba de carga superior de botellas de PET
Requisito Esterform Packaging fabrica más de un millón de botellas de PET y preformas por día para los principales procesadores de agua embotellada, jugos, refrescos, productos lácteos y productos para el hogar.
2555
[Page extract]
Vice grip (Mechanical)
Vice grips (single-action) - having one fixed jaw against which a second parallel jaw is tightened. The position of the fixed face may be adjustable to accommodate differing specimen thickness.
2556
Página
Enlace perdido
La página que solicitó no se encontró en este sitio. Podría haberse movido o algo salió mal.
2557
[Page extract]
ASTM D4476 / D4476M-14
ASTM D4476 is a test method used to determine the flexural properties of fiber-reinforced pultruded plastic rods. The specimen used is a rod with a semi-circular cross section, moulded or cut from lengths of pultruded rods.
2558
[Page extract]
ASTM D3470
This test method covers the determination of the force required to cause a downward-force-while-turning lug-finish closure to be rotated across the container finish lugs (strippage) without downward force being applied to the closure (Type IIA closures)
2559
[Page extract]
ISO 34-2
ISO 34-2 specifies a method for the determination of the tear strength of small test pieces (Delft test pieces) of vulcanized or thermoplastic rubber.
2560
Caso de estudio
Control neumático de carga superior para la prueba de torque de la tapa CRC
Ejemplo de ingeniería personalizada La prueba de torque de las tapas de botellas a prueba de niños requiere la aplicación de una carga superior simultánea.
2561
[Page extract]
ASTM F1473-18
ASTM F1473 is a test method determines the resistance of polyethylene materials to slow crack growth. It is also known as PENT (Pennsylvania Notch Test) test.
2562
[Page extract]
ASTM E855-08
This standard describes three test methods for determining the modulus of elasticity in bending and the bending strength of metallic strips or sheets intended for the use in flat springs.
2563
Caso de estudio
Resistencia y resistencia a la tracción de seda de araña
Requisito La Universidad de Nottingham es un centro de educación global, con campus en el Reino Unido, China y Malasia.
2564
[Page extract]
TAPPI T 576
This test method decribes the procedure, using constant-rate-of-elongation, for determining three tensile breaking properties of towel and tissue: tensile strength, stretch, and tensi;e energy absorption.
2565
Caso de estudio
Pruebas de penetración semiautomáticas en placas de yeso
Ejemplo de ingeniería personalizada British Gypsum (ahora Saint-Gobain) realiza pruebas repetitivas de penetración para evaluar con precisión el rendimiento y la durabilidad de sus productos.
2566
[Page extract]
BS EN 12311-2
BS EN 12311-2 is a test method for determining the tensile properties of flexible sheets used for waterproofing roofs.
2567
[Page extract]
BS EN 1393
BS EN 1393 specifies a test method for testing the longitudinal tensile properties of glass-reinforced thermosetting plastics (GRP) pipes.
2568
[Page extract]
ISO 188
ISO 188:2011 specifies accelerated ageing or heat resistance tests on vulcanized or thermoplastic rubbers. Two methods are given:
2569
[Page extract]
BS EN ISO 314-1
This test standard specifies methods for determining the bonding quality of veneer plywood, blockboard and laminboard by shear testing.
2570
[Page extract]
BS ISO 3384-1:2001+A1
BS ISO 3384-1 is a test method for determining the stress relaxation in compression of vulcanised rubber or thermoplastic.
2571
[Page extract]
ISO 2060
Cancels and replaces the first edition (1972). Specifies a method for the determination of the linear density of all types of yarn in package form. Includes seven optional procedures based on different methods of conditioning and preparation.
2572
[Page extract]
BS EN 71-1
This European Standard specifies different forces or loads to be used when testing toys intended for children of different age groups.
2573
Caso de estudio
Prueba de extracción de la tapa de la ampolla de plástico
Requisito El cliente se acercó a Mecmesin con una especificación para extraer la tapa de un vial farmacéutico. El equipo de prueba debía ser simple de usar y capaz de realizar pruebas repetibles.
2574
[Page extract]
FINAT FTM 9
This test method describes a means of assessing probably the most important and yet the hardest to measure property of pressure sensitive materials, the tack.
2575
[Page extract]
ASTM D5-06e1
This test method covers determination of the penetration of semi-solid and solid bituminous materials. The needles, containers and other conditions described in this test method provide for the determinations of penetrations up to 500.