Search results
1001
Accesorio
Rubber jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 50 mm
Mec227-BG50
Rubber-faced Jaws (10mm x 50mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 4mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
1002
Accesorio
Rubber coated jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 60 mm
Mec154-BG
Rubber-faced Jaws (40mm high x 60mm wide) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 32 mm.
For specimens which may get weakened by pinching at the contact-edge of the grip. (e.g. films, filaments, fibres and…
1003
Accesorio
FINAT 2 Assisted Pull-Peel Table, 90 degrees, adjustable rails for float glass, QC-20
PDV15031
The FINAT 2 Assisted Pull-Peel table (90° Peel Test) is fitted to the anvil plate of a motorised test stand and then connected to the crosshead of a test stand. It is commonly used for conducting peel tests on adhesive tapes and films.
The carriage of…
1004
Accesorio
sample holder for standard fixture table
432-244
Fits to the standard fixture table (432-243) and used for easy configuration and alignment of test fixtures. The small-sample holder has been designed to accommodate spherical or irregular samples. Three sizes of holding plate are supplied.
1005
Accesorio
Bench mounting stand for 'ST' range of mid- and high-range static torque transducers
432-401
Bench mounting stand supplied with all screws used for fixing the 'ST' range of mid- and high-range Static Torque Transducers.
Also equipped with an angled fixing bracket to mount the AFTI display at a convenient viewing angle.
A clearance hole at…
1006
Accesorio
Blank (smooth) jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 50 mm
Mec240k-B50
Blank Jaws (30mm x 50mm) - smooth steel jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = see datasheet for various spans according to the grip body selected.
Supplied as 0.5 set = 2 jaws (left…
1007
Accesorio
V-jaws for 20 & 50kN Wedge Grip, round samples 4-16 mm
Mec243-BV16
V-Jaws (4-16mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods,
tubes).
Supplied as 0.5 set = 2 jaws (…
1008
Accesorio
Smooth jaws for 20 kN Scissor Grip, 10 kN, 25 x 100mm
Mec11-20-B100
Blank Jaws (25mm x 100mm) - smooth steel jaw. Allows user to machine or affix own surface. By using 100 mm width jaws tensile force is reduced to 10kN.
Supplied as 0.5 set = 2 jaws (left…
1009
Accesorio
Precision Lower Fixing Table for Helixa
432-600
Precision Lower Fixing Table for Helixa.
Mounts onto the base of Helixa precision torque testers. Fitted with a precision leadscrew and sprung-loaded runners into which jaws or holding pegs can be inserted (order separately). Tighten the knob to secure…
1010
Accesorio
Rubber jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 25mm
Mec227-BG25
Rubber-faced Jaws (10mm x 25mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 6mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
1011
Accesorio
Blank (smooth) jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 100 mm
Mec240k-B100
Blank Jaws (30mm x 100mm) - smooth steel jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = see datasheet for various spans according to the grip body selected.
Supplied as 0.5 set = 2 jaws (left…
1012
Accesorio
Split Mandrel for Stelvin aluminium closure, mechanical
PDV14161
Half-round jaws with wire-eroded faces, for use with Vortex upper fixing plate (432-321). Specify closure diameter when ordering.
1013
Accesorio
1/2" Lower Chuck Assembly for use on Helixa motor spindle
432-616
A standard self-centering 3-jaw chuck with key. It has a maximum ½ " (12.7 mm) opening and is connected to the Helixa motor-drive spindle via an adaptor with quick-release grub-screw. Used to secure a variety of test specimens for torque applications of 1…
1014
Accesorio
Rubber jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 100 mm
Mec227-BG100
Rubber-faced Jaws (10mm x 100mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 4mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
1015
Accesorio
Lightweight hanger and 50 N slotted mass for verifying FPT 100 N
432-656
A lightweight hanger and an M1 slotted mass of 50N.
For use with the FPT-H1 loadcell calibration checking kit (432-635) to verify the accuracy of HILC 100 N loadcells.
1016
Accesorio
Split Mandrel for Stelvin aluminium closure, mechanical
PDV14161
Half-round jaws with wire-eroded faces, for use with Vortex upper fixing plate (432-321). Specify closure diameter when ordering.
1017
Accesorio
Blank (smooth) jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 30 mm
Mec240k-B
Blank Jaws (30mm x 30mm) - smooth steel jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = see datasheet for various spans according to the grip body selected.
Supplied as 0.5 set = 2 jaws (left…
1018
Accesorio
FINAT 2 Assisted Pull-Peel Table, 90 degrees, adjustable rails for float glass, QC-20
PDV15031
The FINAT 2 Assisted Pull-Peel table (90° Peel Test) is fitted to the anvil plate of a motorised test stand and then connected to the crosshead of a test stand. It is commonly used for conducting peel tests on adhesive tapes and films.
The carriage of…
1019
Accesorio
USB to USB RS232 cable (2m long) for transmitting via COMMS port of 'xt' console to a PC
351-081
USB to USB RS232 cable (2m long) for transmitting data via the COMMS port of 'xt' console to a PC.
Comprises USB-A to USB-A connectors.
1020
Accesorio
Dual Handswitches (locking type) for pneumatic grips
Mec205-3
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-3:
Locking dual handswitches open the jaws of the grip by pushing the lever and remain open after…
1021
Accesorio
Safety guard for fitting to MultiTest 2.5-i /-xt/-dV motorised test stands (500 mm)
432-682
Mecmesin's standard safety guards are designed to prevent access by the operator to the testing area whilst the test is in progress. Guards feature an aluminium frame with integrated polycarbonate panels to allow the operator to view the test area from…
1022
Accesorio
Lightweight hanger and 5 N slotted mass for verifying FPT 10 N
432-655
A lightweight hanger and an M1 slotted mass of 5N.
For use with the FPT-H1 loadcell calibration checking kit (432-635) to verify the accuracy of HILC 10 N loadcells.
1023
Accesorio
Height Scale Bracket Kit for LCP/S Test Stand
432-159
Bracket Set only. Used for mounting of a Mitutoyo ABS-type Digital Height Scale to the lever-operated Manual Test Stand model LCP/S.
Note: Height-scale not included
1024
Accesorio
V-jaw vice clamp repair kit including replacement rubber jaw faces for regular high-load usage
432-679
Repair kit including replacement rubber jaw faces for regular high-load usage
1025
Accesorio
Smooth jaws for 20 kN Scissor Grip, 10 kN, 25 x 100mm
Mec11-20-B100
Blank Jaws (25mm x 100mm) - smooth steel jaw. Allows user to machine or affix own surface. By using 100 mm width jaws tensile force is reduced to 10kN.
Supplied as 0.5 set = 2 jaws (left…