Search results
1751
Accesorio
Test Hook (medium), 500 N, M6
432-169
Medium Fixed Hook fitted with M6 female thread. Used for general purpose tension tests.
1752
Accesorio
Adapter, 500N, 10-32 to M6
432-193
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
10-32 UNF male thread to M6 threaded hole
1753
Accesorio
Radiused Probe - 11 mm, 500 N, 10-32 UNF
432-355
Radiused Probes are used to perform penetration or puncture tests on a wide range of products.
Aspects measured include firmness and ripeness of cosmetics, medical gels and foodstuffs.
8mm tip rising to 11mm outer diameter. Fitted with 10-32 UNF female…
1754
Accesorio
Pyramid (serrated) jaws, 30 x 50 mm, 0.5 set
Mec240k-BP50
Pyramid Jaws (30mm x 50mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1755
Accesorio
Adapter, 500N, M6 to M6, F to F
432-334
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1756
Accesorio
Medium Vice Grip - Single Action, 2 kN, 20 mm opening, QC-20 fitting
Mec240k-S20
MEC 240k-S20 (body only) :
A Medium Single-action Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 2…
1757
Accesorio
Compression Plate, Nickel-plated, Vented by Slots & Flat, 50 mm, 10-32 UNF
432-346
Vented compression plates are ideal for top-load/crush testing of containers such as PET bottles.
Slots in the plate allow the passage of air to ensure that air inside the bottle is not compressed thereby falsifying the true measurement of the top-load…
1758
Accesorio
50 kN Wedge Grip, QC-32 fitting
Mec243-50
MEC 243-50 Wedge Grip (body only):
A multipurpose self-tightening Wedge Grip with a lever arm for rapidly securing and releasing the specimen when testing.
Rated to 50 kN in tension with an opening of 0-16mm depending on the jaw types selected (sold…
1759
Accesorio
Interface cable, AFG/AFTI (2006 - now) or Tornado (2008 - now) to PLC
351-063
Connects AFG, AFTI or Tornado for data comms to a Programmable Logic Controller. Comprises 15-pin female D-connector to twin screened wires.
1760
Accesorio
Test Hook (large), 2.5 kN, 5-16 UNC
432-122
Large Test Hook fitted with 5-16 UNC female thread. Used for general purpose tension tests.
1761
Accesorio
FPT Tear Vice-Grips (pair), 100 mm rubber jaws, QC-8
432-625
A Lightweight Double-action Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile and tear testing of both symmetrical and asymmetrical specimens.
Fitted with 100mm-wide, rubber-…
1762
Accesorio
Diamond-coated Inset jaws, 0.5 set
Mec9-EBD
MEC9-EBD Diamond Jaws
Diamond-coated Inset jaws of 37 mm height x 15 mm width, 0.5 set. For fitting into the carrier of the MEC9 Thin Wire Grip.
Used when jaws need to bite into a soft material to clamp tightly and reduce the risk of slippage.(e.g. soft…
1763
Accesorio
MLTE 1000 Long Travel Extensometer
432-842
The MLTE 1000 Long Travel Extensometer is designed to be used with Mecmesin test systems when running VectorPro MT materials testing software. It accurately measures strain directly from the test specimen to enable the most accurate calculation of the…
1764
Accesorio
Mandrel Peg Drive, 54 mm
PDV15094-A
This fixture is connected to the torque sensor of the Vortex or Helixa. It has 4 metal pegs with an internal opening of 54 mm into which the single-form mandrel can be positioned. The pegs drive the mandrel and thereby apply the tightening and release…
1765
Accesorio
Dial Gauge Bracket Set
432-167
The dial gauge bracket set allows an analogue or digital comparator to be securely fitted to the MDD manual test stand. Digital comparators are suitable for measuring crosshead movement over short distances.
1766
Accesorio
Extension Rod, 130 mm, 500 N, M6
432-187
130mm long Extension Rod M6 female to M6 male. Fitted with knurled thumbwheel for locking accessory in correct orientation.
1767
Accesorio
Medium Vice Grip - Single Action, 2.5 kN, 10mm opening, QC-20 fitting
Mec240k
MEC 240k (body only):
A Single-action Medium Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 2.5 kN…
1768
Accesorio
3-Point Bend Jig, 20 kN, Steel, QC-20 fitting
432-266
A simple 3-point bend jig supplied as standard with a 5mm radius upper anvil (QC 20mm female connection) and two adjustable lower anvils also of 5mm radius.
Lower support beam is fitted with QC 20mm female connection suitable for mounting on single- and…
1769
Accesorio
Radiused Probe - 8 mm, 500 N, 10-32 UNF
432-354
Radiused Probes are used to perform penetration or puncture tests on a wide range of products.
Aspects measured include firmness and ripeness of cosmetics, medical gels and foodstuffs.
6mm diameter at the tip rising to 8mm outer diameter of the probe.…
1770
Accesorio
Adapter, 5 kN, 5-16 UNC to 5-16 UNC, F to F
432-293
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1771
Accesorio
Pyramid (serrated) jaws, 30 x 100 mm, 0.5 set
Mec240k-BP100
Pyramid Jaws (30mm x 100mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1772
Accesorio
Fabric Grip, 200 N, 10-32 UNF
432-386
Fabric grips are designed for tensile and elongation testing of fabric and thin materials below 200N.
Material is gripped between two smooth spring-loaded faces which are clamped together by two locking nuts at either side of the grip to ensure the…
1773
Accesorio
Adapter, 5 kN, 5-16 UNC to M10, M to M
432-333
Male-to-male Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1774
Accesorio
Sample cutter 25 mm wide
PSV13143
Sample cutter 25mm wide - for preparing peel and tensile samples of film/paper.
Includes spare blades and hardened protective mat on which specimens can be cut.
1775
Accesorio
Parallel Jaw Grip, 500 N, 10-32 UNF
432-396
Parallel Jaw Grips are designed for tensile testing up to 500N of thin flat components and materials, which require secure gripping over an extended surface area.
Star handles allow jaw positions to be adjusted to ensure central loading during tensile…