Dreipunktbiegung | Mecmesin

Switch to solutions by

Industry Product Tested Test Type

Some of our customers

Featured case studies

EN 310 3-Punkt-Biegetest auf fertigen Spanplatten vor Ort

Holz für Möbel und Fußböden groß angelegte Biege- und Schältests

Mineralwolleplatten-Schältest und Zugfestigkeitsprüfkörper

Mineralwolle-Dämmplattenprüfung

Standards

Featured or equivalent test standards for Mecmesin solutions in this section

AEC Q200-005

board flex test

ASTM C1161

Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature

ASTM C1341

Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites

ASTM C1684

Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature-Cylindrical Rod Strength

ASTM C203

Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation

ASTM C393

Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure

ASTM C473

Standard Test Methods for Physical Testing of Gypsum Panel Products

ASTM C598

Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending

ASTM C674

Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials

ASTM D1184

Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies

ASTM D143

Standard Test Methods for Small Clear Specimens of Timber

ASTM D2344 / D2344M

Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates

ASTM D3044

Standard Test Method for Shear Modulus of Wood-Based Structural Panels

ASTM D349

Standard Test Methods for Laminated Round Rods Used for Electrical Insulation

ASTM D4476 / D4476M-14

Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods

ASTM D5934-02

Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending (Withdrawn 2009)

ASTM D6112-18

Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes

ASTM D7264 / D7264M-15

Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials

ASTM D790-17

Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

ASTM E1820-18ae1

Standard Test Method for Measurement of Fracture Toughness

ASTM E855-08

Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading

ASTM F1575-03

Standard Test Method for Determining Bending Yield Moment of Nails

ASTM F2193-02

Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System

BS 373

Methods of testing small clear specimens of timber

BS EN 12346

Gymnastic equipment. Wall bars, lattice ladders and climbing frames. Safety requirements and test methods

BS EN 12467

Fibre-cement flat sheets. Product specification and test methods

BS EN 13393

Packaging. Specification for edge protectors

BS EN 14372

Child use and care articles - Cutlery and feeding utensils - Safety requirements and tests

BS EN 2562

Carbon fibre reinforced plastics. Unidirectional laminates. Flexural test parallel to the fibre direction

BS EN 2746

Glass fibre reinforced plastics. Flexural test. Three point bend method

BS EN 310

Wood-based panels. Determination of modulus of elasticity in bending and of bending strength

BS EN 520

Gypsum plasterboards. Definitions, requirements and test methods

BS EN 843-1

Part 1: Determination of flexural strength of advanced technical ceramics_monolithic ceramics:

BS EN ISO 899-2:2003+A1:2015

Plastics. Determination of creep behaviour. Flexural creep by three-point loading

BS EN ISO 9626

Stainless steel needle tubing for the manufacture of medical devices

EN 12089

Thermal insulating products for building applications. Determination of bending behaviour

GS1 5.0

Apparel and General Merchandise. Voluntary Guidelines for Hanger Specifications for Floor-Ready Merchandise

IEC 60371-2

specification for insulating materials based on mica - part 2 methods of test

ISO 14679

Adhesives - Measurement of adhesion characteristics by a three-point bending method

ISO 178

Plastics - Determination of Flexural Properties

ISO 20795-1

dentistry - base polymers - part 1: denture base polymers

ISO 4049

Dentistry — Polymer-based restorative materials 7.11 Flexural strength

ISO 5628

Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods

TAPPI T 577

Score bend test

TAPPI T 829

Score quality test

ASTM C297

Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions

ASTM D4280-03

Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers

ASTM D6862-11

Standard Test Method for 90 Degree Peel Resistance of Adhesives

BS EN 12090

Thermal insulating products for building applications. Determination of shear behaviour

BS EN 12430

Thermal insulating products for building applications. Determination of behaviour under point load

BS EN 1607

Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces

BS EN 1608

Thermal insulating products for building applications. Determination of tensile strength parallel to faces

EN 826

Thermal insulating products for building applications - determination of compression behaviour

Ein Student beobachtet einen Drei-Punkt-Biegetest an einem Oreo, der Teil eines klasseninternen Labors in seinem Kurs Einführung in die Materialwissenschaft ist. Die Echtzeit-Ergebnisse des MultiTest werden im Klassenzimmer projiziert.

Fallstudie

Das Worcester Polytechnic Institute (WPI) findet den idealen Ort für die Materialwissenschaft

EN 310 3-Punkt-Biegetest auf fertigen Spanplatten vor Ort

Fallstudie

Holz für Möbel und Fußböden groß angelegte Biege- und Schältests

Mineralwolleplatten-Schältest und Zugfestigkeitsprüfkörper

Fallstudie

Mineralwolle-Dämmplattenprüfung

Prüfung der Druckfestigkeit von keramischen Straßenmarkierungen nach ASTM 4280

Fallstudie

Keramische Straßenmarkierungsdruck- und Biegefestigkeitsprüfung nach ASTM 4280

Vorderansicht und Seitenabschluß des Isolierband-Biegeversuchs herauf PDV14003

Kundenspezifisch

Prüfung der Isolierfilmsteifigkeit

Surfboard im Einsatz und Schaumstoffmaterial auf Biegefestigkeit geprüft

Fallstudie

Surfbrettschaum Dreipunktbiegetest

Eingesetzter Schutz aus Beton

Fallstudie

Geosynthetische Biegefestigkeit von zementhaltigen Verbundmatten