Search results
1676
Accessory
Kettenglied (lang) und Haken, 2.5 kN, 5-16 UNC
432-410
Das Kettenglied mit Haken wird an eine Vielzahl Artikel befestigt, die normaleweise schwierig zu halten sind.
Die Kette ist 1 m lang und hat eine Gabelkopf-Befestigung an beide Enden.
Das Kettenglied wird auch verwendet, wenn manuelle Kraftmessgeräte…
1677
Accessory
sample holder for standard fixture table
432-244
Fits to the standard fixture table (432-243) and used for easy configuration and alignment of test fixtures. The small-sample holder has been designed to accommodate spherical or irregular samples. Three sizes of holding plate are supplied.
1678
Accessory
Dual Footswitches (non-locking type) for pneumatic grips
Mec205-1
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-1:
Non-locking dual footswitches open the jaws of the pneumatic grip by pressing the foot pedal…
1679
Accessory
Pneumatische U-Form-Schraubspannköpfe mit einseitigen Kolben, 2.5 kN, Paar, Schnellwechsel-Befestigung QC-20
Mec240g+Ko
MEC 240g + 2kO (nur Korpus)
Ein Paar Luftdruckbetriebener U-Form Schraubspannköpfe mit einseitigen Pneumatikkolben jeweils mit Durchmesser 70 mm.
Die "U-Form", die in den Aluminiumkörper dieses Schraubspannkopfes geschnitten wird, schafft den Platz für…
1680
Accessory
Dial Gauge Bracket Set
432-167
The dial gauge bracket set allows an analogue or digital comparator to be securely fitted to the MDD manual test stand. Digital comparators are suitable for measuring crosshead movement over short distances.
1681
Accessory
20 kN Wedge Grip, QC-20 fitting
Mec243-20
MEC 243-20 Wedge Grip (body only):
A multipurpose self-tightening Wedge Grip with a lever arm for rapidly securing and releasing the specimen when testing.
Rated to 20 kN in tension with an opening of 0-16mm depending on the jaw types selected (sold…
1682
Accessory
Compression Plate, Hardened and Ground, 50 mm, M6
432-197
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
50mm diameter having M6 female thread.
1683
Accessory
Grosser Fadenspannzeug, 2 kN, Schnellwechsel-Befestigung QC-20
432-271
Dieser grosser Fadenspannzeug ist aus Stahl und wurde für das Testen bis 2 kN von flexiblen Drahtmaterialien mit maximaler Dicke 2 mm entwickelt.
Die Probe wird um den Poller herumgewickelt und das freie Ende des Probenkörpers wird zwischen 2 flache…
1684
Accessory
Self-levelling Compression Plate Steel - 156 mm, 25 kN, QC-20 fitting
MecS223k-156
MecS223k - 156mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel…
1685
Accessory
Adapter, 500 N, 10-32 UNF to 10-32 UNF, F to F
432-328
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1686
Accessory
3/8" Upper Chuck Assembly for use on Helixa sensors
432-615
A standard self-centering 3-jaw chuck with key.
It has a maximum ⅜" (9.5 mm) opening and is connected to the Helixa torque sensor via an adaptor with female ⅜" square hole.
Used to secure a variety of test specimens for torque applications of 1.5 - 10…
1687
Accessory
Exzentrischer Rollenspannzeug - Walze mit Pyramidenrändelung, 1 kN, Schnellwechsel-Befestigung QC-20
Mec7-1
MEC7-1 Exzentrischer Rollenspannzeug
Inkl. 50mm breite Walze mit Pyramidenrändelung. Wenn eine Last auf eine Probe aufgebracht wird, zieht sich die Nockenscheibe selbsttätig und verteilt die Last gleichmäßig.
Der Hebel ermöglicht ein schnelles Einsetzen…
1688
Accessory
Compression Plate, Hardened and Ground, 19 mm, 10-32 UNF
432-337
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
19mm diameter having 10-32 UNF female thread.
1689
Accessory
Self-levelling Compression Plate Steel - 116 mm, 50 kN, QC-32 fitting
MecS223g-116
MecS223g - 116mm diameter Self-levelling Compression Plate:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The…
1690
Accessory
Compression Plate, Self-levelling, Hardened & Ground, 100 mm, 5-16 UNC
432-351
Self-levelling compression plates are ideal for general compression testing on a range of materials and finished products. Self-levelling allows parallelism to be set for those applications where it is critical to accurately measure the deformation of a…
1691
Accessory
Dual Footswitches (locking type) for pneumatic grips
Mec205-2
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec 205-2:
Locking dual footswitches open the jaws of the grip by pressing the foot pedal and remain…
1692
Accessory
Self-levelling Compression Plate Steel - 56 mm, 25 kN, QC-20 fitting
MecS223k-56
MecS223k - 56mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel…
1693
Accessory
Clevis Grip (Large), 2.5 kN, 5-16 UNC
432-400
Large Clevis Grip fitted with female 5-16 UNC thread and supplied with male grub-screw.
Used for testing heavy duty tension springs or for securing odd-shaped parts up to 2.5 kN capacity.
1694
Accessory
Scissor Grip, 5 kN, QC-20 fitting
Mec11-5
MEC11-5 Scissor-action grip (Body only) :
Rated to 5 kN fitted with QC-20 connection.
Spring tension provides enough clamping force to prevent the specimen from slipping when initially inserted. The rated tensile force changes according to the opening…
1695
Accessory
Flip Cap Accessory, 100 N, 10-32 UNF
432-419
The Flip Cap Accessory is designed to easily fit under flip caps to test their opening force.
It is fitted with a 10-32 UNF female thread and supplied with a male grub-screw for easy connection to a loadcell or force gauge.
1696
Accessory
16 mm Traverse-Verlängerung
432-307
Mit der Traverse-Verlängerung von 16mm kann die Kraftmessdose an einem einsäuligen Multitest Prüfstand von der Säule weiter weg positioniert, um Platz für grössere Proben zu machen.
Die maximale Nennkraft des Prüfstandes wird um 25% reduziert.
1697
Accessory
Druckknopf-Abzieh-Vorrichtung mit 3 Backen, 500 N, 10-32 UNF
432-409
Diese Druckknopf-Abziehvorrichtung hat 3 Backen und eine Drehfunktion zur sicheren Einklemmung von Druckknöpfen mit 13 bis 15 "Lignes".
Wird für Zerstörungstest zum Ausziehen des Druckknopfes vom Textilstoff.
In der Regel mit dem "Druckknopf-…
1698
Accessory
standard T-slot fixture table
432-243
This standard fixture table is used for easy configuration and alignment of test fixtures. Fits to a T-slot anvil.
1699
Accessory
Large Single-action Vice Grip, wave-form, 2 kN, QC-20 fitting
432-267-V02
A Large Single-action Vice Grip featuring one fixed jaw and one jaw as freely adjustable to mechanically clamp the specimen in place.
Rated to 2 kN in tension with wave-form jaws of 78mm wide x 28mm high having an opening of 0 - 6.5 mm. Provides…
1700
Accessory
‘T’ slot Base Plate
432-294
‘T’ slot base plate (replaces the standard base plate on single-column motorised test stands).
For use with specialist fixtures such as 1kN 3-point Bend Jig (432-294)
Includes ‘T’ bolt fittings.