Search results
1026
Event
Child Resistant Closure Testing
Medical, Pharmaceutical and Chemical Packaging takes product safety seriously.
1027
Event
Child Resistant Closure Torque Testing
Medical, Pharmaceutical and Chemical Packaging takes product safety seriously.
1028
[Page extract]
bursting strength (sheet rupture)
Bursting strength is the capacity of a material or product to maintain in continuity when subjected to pressure.
1030
Case study
Zugprüfung von Sicherheitsnetzen zur Zertifizierung
Anforderung
IPS Safety Netting liefert und installiert Tausende von Sicherheitsnetzen für die Bauindustrie. Die Netze dienen zum Auffangen von Stürzen und zum Schutz vor herabfallendem Schmutz.
1031
Case study
Crimpprüfkabel
Anforderung Ein führender britischer Kabelkonfektionshersteller, Telecom Connections Limited, der Kunden in der Telekommunikations- und Elektronikindustrie hochwertige Kabelkonfektionen und Kabelbäume liefert, wollte ihre Kabelcrimpanschlüsse
1032
Case study
Zugprüfmaschine für Kabel und Rohre
Anforderung Roxtec ist ein weltweit führender schwedischer Anbieter von flexiblen Kabel- und Rohrdichtungen.
1033
Accessory
Interlock override plug
PDV12034-01
Plug for use with software-controlled "-i" and "-xt" systems. It allows an interlocked guard to be used in non-interlock mode.
Helps when first setting up trial test programmes.
1034
Accessory
Fadenspannzeug inkl. Grundträger für Einsatzbacken, 2.5 kN, Schnellwechsel-Befestigung QC-20
Mec9
MEC9 Fadenspannzeug
Dieser Spannzeug wurde entwickelt, um feine Drähte, dünne Seile oder schmale Bänder zwischen flachen Oberflächen bei Zugprüfungen bis 2.5 kN einzuklemmen.
Die Probe wird zunächst um einen Poller gewickelt und dann durch manuelles…
1035
Accessory
Diamant Backen für Mec227 Kleiner Schraubspannkopf, 100 N, 10 x 50 mm
Mec227-BD50
Diamantenbacken (10 mm hoch x 50 mm breit) - vernickelt und bechichtet mit synthesischen Diamanten.
Öffnungsweite = 0 - 8mm.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu gewährleisten (z. B. weiche Metalle {…
1036
Accessory
3- & 4-point Bend Jig, 50 kN, Steel, QC-32 fitting
Mec103-cgr
MEC103 - A compact yet fully-configurable 50 kN Bend Jig in steel.
The main support beam attaches to the base of the test frame and has a bending span up to 120 mm. It can accept a wide selection of interchangeable single-roller or dual-roller anvils to…
1037
Accessory
Pyramiden Backen für Mec94 Leichtes pneumatisches Spannzeug, 200 N, 25 x 50 mm
Mec94-BP50
Pyramiden Backen (25 mm hoch x 50 mm breit) - vernickelt mit einer Oberfläche aus 1,2 mm hohen gehärteten Stahlpyramiden.
Öffnungsweite = 0 - 20mm.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu gewährleisten (z…
1038
Accessory
Gummibeschichte Backen für Mec240g Schraubspannkopf - U-formig, 5 kN, 30 x 80mm
Mec240g-BG80
Gummi Backen (30 mm hoch x 80 mm breit) - vernickelt mit einer 1 mm dicken Schicht aus NBR.
Öffnungsweite = Je nach Spannzeugtyp - siehe Datenblatt.
Bei Proben, die durch Quetschen an der Kontaktkante der Backe geschwächt werden können. (z.B. Filme,…
1039
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+Ko
MEC 240k- S20+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic piston.
This…
1040
Accessory
Pneumatische einfache Schraubspannköpfe mit einseitigen Kolben, 1 kN, Paar, Schnellwechsel-Befestigung QC-20
Mec240k+Ko
MEC 240k + kO (nur Korpus)
Ein Paar Luftdruckbetriebener einfache Schraubspannköpfe mit einem einseitigen Pneumatikkolben von Durchmesser 50 mm + einem manuellen Backenhalter.
Max. Spannkraft 1 kN mit einer Öffnungsweite von 0-10 mm, je nach Art der…
1041
Accessory
Gummibeschichte Backen für Mec240k Schraubspannkopf, 2.5 kN, 30 x 80mm
Mec240k-BG80
Gummi Backen (30 mm hoch x 80 mm breit) - vernickelt mit einer 1 mm dicken Schicht aus NBR.
Öffnungsweite = Je nach Spannzeugtyp - siehe Datenblatt.
Bei Proben, die durch Quetschen an der Kontaktkante der Backe geschwächt werden können. (z.B. Filme,…
1042
Accessory
Pneumatische einfache Schraubspannköpfe mit einseitigen Kolben, 1 kN, Öffnungsweite 0-20mm, Paar, Schnellwechsel-Befestigung QC-20
Mec240k-S20+Ko
MEC 240k-S20 + kO (nur Korpus)
Ein Paar Luftdruckbetriebener einfache Schraubspannköpfe mit einem einseitigen Pneumatikkolben von Durchmesser 50 mm + einem manuellen Backenhalter.
Max. Spannkraft 1 kN mit einer Öffnungsweite von 0-20 mm, je nach Art der…
1043
Accessory
3- & 4-point Bend Jig, 50 kN, Steel, QC-32 fitting
Mec103-cgr
MEC103 - A compact yet fully-configurable 50 kN Bend Jig in steel.
The main support beam attaches to the base of the test frame and has a bending span up to 120 mm. It can accept a wide selection of interchangeable single-roller or dual-roller anvils to…
1044
Accessory
Large Single-action Vice Grip, wave-form, 2 kN, QC-20 fitting
432-267-V02
A Large Single-action Vice Grip featuring one fixed jaw and one jaw as freely adjustable to mechanically clamp the specimen in place.
Rated to 2 kN in tension with wave-form jaws of 78mm wide x 28mm high having an opening of 0 - 6.5 mm. Provides…
1045
Accessory
Heavy-duty Vice Grip - Single Action, 20 kN, QC-20 fitting
Mec154-20
MEC 154-20 (body only - steel):
A Single-action Heavy-duty Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.…
1046
Accessory
Chisel Point - 12 mm diameter, 5 kN, 5-16 UNC
432-361
Chisel Points probe with angle of of Ø 12mm 60° typically used for puncturing and splitting samples.
Maximum compressive force is 5 kN.
Fitted with a 5-16 UNC female thread for connection to loadcell.
1047
Accessory
U-form Pneumatic Vice Grip - Single Action, 2.5 kN, 18 mm opening, pair, QC-20 fitting
Mec240g+Ko
MEC 240g +kO (body only) :
A pair of pneumatically-operated, Single-action U-form Vice Grips with an opening of 0-18mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 70 mm diameter pneumatic…
1048
Accessory
V-jaws for Mec240k Medium Vice Grip, 2.5 kN, for round samples Ø 2-52 mm
Mec240k-BV2
V-Jaws (2-52mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes)
Supplied as 0.5 set = 2 jaws (…
1049
Accessory
Kabelnocken-Klemmvorrichtung (gross geriffelt), 5 kN, M10 oder M12
432-108
Kabelnocken-Klemmvorrichtung (geriffelt, gross)
Dieses Spannzeug wurde für das Halten von isolierten Kabel und Draht entwickelt. Die Probe wird von der gezähnter Nockel gehalten, die sich selbst unter Aufbringung der Kraftbelastung anzieht und die…
1050
Accessory
CrimpTest-1 kN Calibration Bracket
432-671
The calibration bracket is designed for verifying the accuracy of the CrimpTest-1 kN loadcell readings. For the user, this ensures that a unit does not continue to be used with inaccurate readings across its range. The main bracket should be bolted to a…