Search results
251
Accessory
V-jaws for Mec240g U-Form Vice Grip, 5 kN, for round sample Ø 5-50 mm
Mec240g-BV5
V-Jaws (5-50mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods,
tubes)
Supplied as 0.5 set = 2 jaws (…
252
Accessory
V-jaws for 20 & 50kN Wedge Grip, for round samples 3-13 mm
Mec243-BV
V-Jaws (3-13mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes).
Supplied as 0.5 set = 2 jaws…
253
Accessory
Diamond coated jaws for Mec240k Medium Vice Grip, 30 x 30 mm
Mec240k-BD
Diamond Jaws (30mm x 30mm) - nickel-plated having clamping surface coated with synthetic diamonds.
Opening span = see datasheet for various spans according to the grip body selected.
For materials which need a “bite” to secure a good grip (e.g. soft…
254
Accessory
Blanke (glatte) Backen ohne Beschichtung für Mec227 Kleiner Schraubspannkopf, 100 N, 10 x 50 mm
Mec227-B50
Blanke (glatte) Backen (10 mm hoch x 50 mm breit) - aus Aluminium. Rohling ohne Beschichtung. Geeignet zur eigenen Weiterbearbeitung.
Öffnungsweite = 0 - 6mm.
Lieferung als 0,5 Satz = 2 Backen (links und rechts). Bestellen Sie eine beliebige Kombination…
255
Accessory
Pyramid (serrated) jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 25 mm
Mec94-BP25
Pyramid Jaws (25mm high x 25mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Opening span = 0 - 20 mm.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper…
256
Accessory
Rubber jaws for Mec83 U-Form Pneumatic Vice Grip, 5 kN, 40 x 100 mm
Mec83-BG100
Rubber-faced Jaws (40mm x 100mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0-10mm, 10-20mm or 20-30mm depending on which rod and piston are fitted to the Mec83 body.
For fragile samples, which may get weakened by…
257
Accessory
Pyramid (serrated) jaws, 30 x 30 mm, 0.5 set
Mec240k-BP
Pyramid Jaws (30mm x 30mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
258
Accessory
Self-levelling Compression Plate Steel - 96 mm, 25 kN, QC-20 fitting
MecS223k-96
MecS223k - 96mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel…
259
Accessory
Wave jaws for Mec83 U-Form Pneumatic Vice Grip, 5 kN, 40 x 100 mm
Mec83-BW100
Wave Jaws (40mm x 100mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = 0-10mm, 10-20mm or 20-30mm depending on which rod and piston are fitted to the Mec83 body.
For flexible but slippy materials which need more…
260
Accessory
Wave jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 50 mm
Mec240k-BW50
Wave Jaws (30mm x 50mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).
Supplied as 0.5 set = 2 jaws (left…
261
Accessory
MultiTest 0.5 Faltenbalg-Baugruppe (1200 mm)
432-473
Optionaler Faltenbalg für die Baugruppe von MultiTest 0,5 Einsäulen-Prüfständern, um gegen den Eintritt von Staub, Partikeln oder Spritzwasser in die Säule zu schützen.
Beachten Sie, dass die Montage des Faltenbalgs die Ausladung am Prüfstand um 18 mm…
262
Accessory
FINAT 2 Assisted Pull-Peel Table, 90 degrees, adjustable rails for float glass, QC-20
PDV15031
The FINAT 2 Assisted Pull-Peel table (90° Peel Test) is fitted to the anvil plate of a motorised test stand and then connected to the crosshead of a test stand. It is commonly used for conducting peel tests on adhesive tapes and films.
The carriage of…
263
Accessory
Set of 4 fixing pegs for torque testers - 100mm high
432-250
Set of 100mm high extended-length gripping pegs.
These gripping pegs have a soft-rubber sleeve to clamp and keep taller samples secure and vertically aligned during torque testing.
Pegs are fitted with an M6 thread and attach to upper and lower…
264
Accessory
Interface cable RS232, 9-pin D-type plug to USB-A
432-450
A 9-pin RS232 male D-connector to USB-A connector. For use with VTG Tornado.
Also suitable for connecting to 'old' gauge cables which have 9-pin RS232 female D-connectors. Fits to part numbers 351-059, 351-054, 351-040 and 351-051.
265
Accessory
90-degree Peel Jig for FPT-H1
432-620
This 90-degree Peel Jig fits to the FPT-H1 for 90 degree peel testing of pressure sensitive tapes and labels in accordance with international standards.
FINAT FTM2, ASTM D330. PSTC 101 Method F.
It accepts interchangeable float glass and stainless steel…
266
Accessory
Needle Probe, stainless steel, 2 mm
432-087
The 2mm diameter needle probe is made from stainless steel and has an M3 female thread. It is designed for surface puncture and penetration tests.
Commonly used with extension rod M3 male to 10-32 UNF female ... part number 432-100
267
Accessory
Blank (smooth) jaws for Mec154 Heavy-duty Vice Grip, 20 kN, 40 x 100 mm
Mec154-B100
Blank Jaws (40mm high x 100mm wide) - smooth steel jaw.
Opening span = 0 - 34 mm.
Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Supplied as 0.5 set = 2 jaws (left…
268
Accessory
Clevis Grip (Large), 2.5 kN, 5-16 UNC
432-400
Large Clevis Grip fitted with female 5-16 UNC thread and supplied with male grub-screw.
Used for testing heavy duty tension springs or for securing odd-shaped parts up to 2.5 kN capacity.
269
Accessory
V-jaws for Mec11-20 Scissor Grip, 20 KN, Ø 4 - 15 mm diameter
Mec11-20-BV
V-Jaws (4-15mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
Grip opening to suit round samples of 10 - 48mm diameter where flat jaws do not provide enough surface contact (e.g. wires, rods,…
270
Accessory
V-jaws for Mec154 Heavy-duty Vice Grip, 20kN, for round samples Ø 6-34 mm
Mec154-BV6
V-Jaws (6-34 mm diameter with clamping height of 40mm) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods, tubes)…
271
Accessory
Blank (smooth) jaws for Mec154 Heavy-duty Vice Grip, 20 kN, 40 x 100 mm
Mec154-B100
Blank Jaws (40mm high x 100mm wide) - smooth steel jaw.
Opening span = 0 - 34 mm.
Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Supplied as 0.5 set = 2 jaws (left…
272
Accessory
Pyramid (serrated) jaws for 20 & 50kN Wedge Grip, 50 x 35mm, 0 -13mm opening
Mec243-BP
Pyramid Jaws (50mm high x 35mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
Jaw opening = 4 - 16mm.
For flat specimens of materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft…
273
Accessory
Wave jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 60 mm
Mec154-BW
Wave Jaws (40mm x 60mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = 0 - 34 mm.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).…
274
Accessory
Rubber jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 25 mm
Mec94-BG25
Rubber-faced Jaws (25mm x 25mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 18mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
275
Accessory
Lightweight Vice Grip - Double Action, 250 N, Opening 0-8mm, 10-32 UNF
Mec227
MEC 227 (body only):
A Lightweight Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
Rated to 250 N in tension with an…