Search results
351
Accessory
Float glass plates (10 pieces), 2" x 8" for FINAT 2 Peel Table
PSV15030
A set of 10 pieces of 2" wide x 8" long (51 x 203mm) float-glass plates. Used to mount adhesive specimens on when testing tensile peel strength to the requirements of FINAT and other standards.
For use with the FINAT 2 Assisted Peel Table - part number…
352
Accessory
432-662-1.5 Gold torque reference bottle 1.5 N.m
432-662-1.5
The Torque Reference Bottle (also known as ' Gold Bottle') provides a means of quickly verifying the calibration of motorised torque measuring systems Helixa and Vortex. Its magnetic clutch repeatedly slips at a factory-set, specified torque value. The…
353
Accessory
Compression Plate, Self-levelling, Hardened & Ground, 70 mm, 5-16 UNC
432-350
Self-levelling compression plates are ideal for general compression testing on a range of materials and finished products. Self-levelling allows parallelism to be set for those applications where it is critical to accurately measure the deformation of a…
354
Accessory
Druckkonus 12,7 mm, 5 kN, 5-16 UNC
432-359
Ein Druckkonus von Ø 12,7 mm mit einem Winkel von 60 °.
Zur Druckprüfung verschiedener Bauteile oder Materialien bis 2,5 kN.
Wird in der Regel dort eingesetzt, wo eine Druckkraft an einem Punkt oder zum Eindringen in ein Material über einen kurzen Weg…
355
Accessory
Medium Vice Grip - Single Action, 1 kN, 30 mm opening, QC-20 fitting
Mec240k-S30
MEC 240k-S30 (body only) :
A Medium Single-action Vice Grip allowing one jaw to be set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 1 kN in…
356
Accessory
Doppelfussschalter (rastend) für pneumatische Klemmer
Mec205-2
Pneumatische Klemmer sind die ideale Wahl, wenn Sie Zugversuche an empfindlichen Materialien durchführen, die beim Spannen zum Rutschen oder Brechen neigen.
Mec 205-2: Doppelfußschalter mit Rastfunktion
Die Backen des pneumatischen Klemmers öffnen…
357
Accessory
Medium Vice Grip - Single Action, 1 kN, 52 mm opening, QC-20 fitting
Mec240k-S50
MEC 240k-S50 (body only) :
A Medium Single-action Vice Grip allowing one jaw to be manualy set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 1…
358
Accessory
Zwicker mit Feder inkl. Kette, 20 N, Schnellwechsel-Befestigung QC-20
MecS205k
Ein kleiner Zwicker mit Federhaltekraft inklusiv Kette und glatte (blanke) Backen.
Klemmoberfläche 10 x 10 mm.
Öffnungsweite: 0-3.4 mm
Vielseitig einsetzbar, einfache Handhabung.
Geeignet für kleine Kräfte, Abzugsversuche, Abreisversuche von…
359
Accessory
Upper Key-operated Chuck, square drive, for use with Vortex sensors
432-444
Upper ‘key-operated’ 4-jaw Chuck (small)
Fitted with a square-drive adapter for connection to 'Vortex' torque sensors. Supplied with dedicated chuck-key and 3 different sets of interchangeable jaws. Max.opening 50mm depending on jaws selected.
Used for…
360
Accessory
CrimpTest-1 kN Calibration Bracket
432-671
The calibration bracket is designed for verifying the accuracy of the CrimpTest-1 kN loadcell readings. For the user, this ensures that a unit does not continue to be used with inaccurate readings across its range. The main bracket should be bolted to a…
361
Accessory
Hebelbetriebene Nocken-Spannvorrichtung (geriffelt klein), 500 N, 10-32 UNF
432-383
Die kleine hebelbetriebene Nocken-Spannvorrichtung hat einen metallüberzogenen 30mm breiten Roller, der automatisch anzieht, wenn eine Probe unter eine Kraftbelastung gesetzt wird. Die Belastung wird dadurch auf ebene Weise verteilt. Der Hebel ermöglicht…
362
Accessory
Sample cutter 15 mm wide
PSV13007
Sample cutter for preparing peel and tensile samples of film/paper. Adjustable blade spacing upto 70 mm, or quickly set at 15 mm or 1 inch wide with the width adjustment block.
Includes spare blades, width adjustment block and hardened protective mat on…
363
Accessory
432-662-1.0 Gold torque reference bottle 1.0 N.m
432-662-1.0
The Torque Reference Bottle (also known as ' Gold Bottle') provides a means of quickly verifying the calibration of motorised torque measuring systems Helixa and Vortex. Its magnetic clutch repeatedly slips at a factory-set, specified torque value. The…
364
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+Ko
MEC 240k +kO (body only) :
A pair of pneumatically-operated, Single-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
365
Accessory
Compression Plate, Self-levelling, Hardened & Ground, 50 mm, 10-32 UNF
432-349
Self-levelling compression plates are ideal for general compression testing on a range of materials and finished products. Self-levelling allows parallelism to be set for those applications where it is critical to accurately measure the deformation of a…
366
Accessory
Druckkonus 8 mm, 500 N, 10-32 UNF
432-358
Ein Druckkonus von 8mm mit einem Winkel von 60 °.
Zur Druckprüfung verschiedener Bauteile oder Materialien bis 500 N.
Wird in der Regel dort eingesetzt, wo eine Druckkraft an einem Punkt oder zum Eindringen in ein Material über einen kurzen Weg…
367
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+Ko
MEC 240k- S20+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic piston.
This…
368
Accessory
Doppelfussschalter (nicht rastend) für pneumatische Klemmer
Mec205-1
Pneumatische Klemmer sind die ideale Wahl, wenn Sie Zugversuche an empfindlichen Materialien durchführen, die beim Spannen zum Rutschen oder Brechen neigen.
Mec205-1: Nicht rastende Doppelfußschalter
Die Backen des pneumatischen Klemmers öffnen sobald…
369
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 30 mm opening, pair, QC-20 fitting
Mec240k-S30+Ko
MEC 240k- S30+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-30mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter…
370
Accessory
Inverted Chisel Point, Ø 12 mm, 5 kN, 5-16 UNC
432-357
For compression testing of cylindrical or wire specimens up to 5 kN.
Specimen is located centrally within the inverted V-shape and compressed to a set distance or a break.
Fitted with a 5-16 UNC female thread for connection to loadcell
371
Accessory
Cable tie break fixture for CrimpTest-1 kN
432-653
Cable-tie Break Fixture for CrimpTest-1
The Cable-tie Break Fixture comprises 2 split halves each having semi-circular stepped bollards for testing the tensile strength of cable-ties. There are 3 steps of 10 mm height steps to accommodate various length…
372
Accessory
AFG / BFG zu PC-Eingabewerkzeug
432-234
Das PC Input Tool ermöglicht die Übertragung einer einzelnen Messung von einem digitalen Messgerät direkt in Microsoft Excel.
Es erfordert die Verwendung des entsprechenden Schnittstellenkabels:
* für AFG / AFTI / Tornado verwenden Sie Kabel 351-058
*…
373
Accessory
432-662-0.5 Gold torque reference bottle 0.5 N.m
432-662-0.5
The Torque Reference Bottle (also known as ' Gold Bottle') provides a means of quickly verifying the calibration of motorised torque measuring systems Helixa and Vortex. Its magnetic clutch repeatedly slips at a factory-set, specified torque value. The…
374
Accessory
Medium Vice Grip - Single Action, 2.5 kN, 10mm opening, QC-20 fitting
Mec240k
MEC 240k (body only):
A Single-action Medium Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 2.5 kN…
375
Accessory
Grundplatte mit T-förmigem Schlitze
432-294
Eine Grundplatte mit T-förmigen Schlitzen (ersetzt die Standardgrundplatte an Mecmesin Prüfstände).
Wird zur Verwendung von Sondervorrichtungen benötigt z.B. 3-Punkt Biegevorrichtung (432-294)
Geliefert mit T-förmigen Bolzen.