Search results
1301
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+Ko
MEC 240k- S50+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
1302
Accessory
Pin Chuck, 100 N, M6
432-214
Pin chucks are specifically designed for gripping circular or rod-type specimens of diameters between 0.5 - 3.5mm.
For tension and compression testing below 100N.
Fitted with adaptor having M6 female threaded hole & M6 grub-screw
1303
Accessory
Large Pinch Grip, 500 N, M6
432-278
The Large Pinch Grip is fitted with 10mm high x 25mm wide cross-hatch jaw faces to ensure samples are held securely for tensile tests below 500 N.
One jaw is fixed and the other jaw is on a spring-loaded hinge which opens to 15mm. Fast installation and…
1304
Accessory
Inverted Chisel Point - Ø 8 mm, 500 N, 10-32 UNF
432-356
For compression testing of cylindrical or wire specimens up to 500 N.
Specimen is located centrally within the inverted V-shape and compressed to a set distance or a break.
Fitted with a 10-32 UNF female thread for connection to loadcell
1305
Accessory
Schraubspannkopf - U-förmig doppeltwirkend, 5 kN, Öffnungsweite 100 mm, Schnellwechsel-Befestigung QC-20
Mec240g-S100
Mec 240g-S100 (nur Korpus):
Ein U-Form Schraubspannkopf mit doppeltwirkender Konstruktion ermöglicht die freie Einstellung der beiden Backen, so dass sie um die Mittelachse ausgerichtet werden können, um Zugversuche an symmetrischen und asymmetrischen…
1306
Accessory
Mitutoyo DP1-VR Series 264-Digimatic Mini-Processor (UK)
432-204
Ein handtellergroßer Drucker von Mitutoyo. Es wird verwendet, um Messdaten über digimatischem Ausgangssignal von digitalen Kraft- und Drehmomentimessgeräte zu drucken.
Führt eine statistische Analyse durch und kann zusätzlich zu komplizierteren…
1307
Accessory
Heavy-duty Textile Grip, 50 kN, QC-32 fitting
432-434
Heavy-duty Textile Grips are designed for tensile testing of high strength fabrics, textiles and webbing, which require special grips to prevent specimen slippage.
By winding the belt around the split bodies the stresses in the sample are distributed,…
1308
Accessory
Mettler Toledo RS-P26 printer (Euro)
432-503
A basic ticket printer with simple statistical analysis manufactured by Mettler Toledo.
Communicates with Mecmesin force gauges via RS232 serial link - order interface cable separately.
Supplied with mains-power adaptor 220V with plug (2-pin round)
Uses…
1309
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 30 mm opening, pair, QC-20 fitting
Mec240k-S30+Ko
MEC 240k- S30+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-30mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter…
1310
Accessory
Extended Peg Hook, 50 N, 10-32 UNF
432-181
The extended peg hook is supplied fitted to a short chain link assembly having a 10-32 UNF female thread. It is used for gripping clothing attachments with a loop, e.g. a bow, when carrying out pull-off "test-to-failure" tests.
Typically used in…
1311
Accessory
Spring-loaded Pinch Grip with Chain Link, 10 N, QC-20 fitting
MecS205k
A Spring-loaded Pinch Grip designed for small-area contact (10mm x 10mm) to grip a delicate sample.
The sprung-loaded adjustable screw-mechanism allows an opening up to 3.4mm and acts in a pincer motion to secure specimens.
Fitted with a flexible chain…
1312
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+2Ko
MEC 240k- S50+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
1313
Accessory
Automated Syringe Batch Tester
PDV19179
The Automated Syringe Batch tester is a bench-top system for checking the ‘break-loose’ and ‘glide force’ of up to 12 individual syringes in one ‘load-and-run’ cycle. In the face of increased demand on production of syringes, this system enables larger…
1314
Accessory
Clevis Grip (Large), 2.5 kN, 5-16 UNC
432-400
Large Clevis Grip fitted with female 5-16 UNC thread and supplied with male grub-screw.
Used for testing heavy duty tension springs or for securing odd-shaped parts up to 2.5 kN capacity.
1315
Accessory
Heavy-duty Belt Grips, 10 kN, QC-20 fitting
432-277
Heavy-duty Belt Grips are designed for tensile testing of high strength belts and straps such as conveyor belts, which require special grips to prevent specimen slippage.
By winding the belt around the split bodies the stresses in the sample are…
1316
Case study
Prüfsysteme für Kfz-Schaltgeräte
Anforderung
Die Zulieferer elektrischer Systeme für Automobilhersteller müssen umfangreiche Qualitäts- und Leistungsstandards erfüllen, um als erstklassige Anbieter bestehen zu können.
1317
Case study
Zugfestigkeitsprüfung des Fischernetzes nach ISO1806
Anforderung Fischernetze sind eines der Schlüsselinstrumente in der kommerziellen Fischerei, und es gibt viele Arten von aktiven und passiven Fanggeräten.
1318
[Page extract]
Standards and compliance
International standards ensure penetration and puncture testing is performed consistently for reliable and comparable results.
Key examples include:
1319
[Page extract]
Importance of puncture and shear resistance testing
Puncture and shear resistance testing is a critical quality assurance process for materials used in packaging, textiles, industrial manufa
1320
[Page extract]
Why is flexural strength testing important?
Flexural strength testing provides engineers, designers, and researchers with essential insights into how a material responds to bending forces.
1321
[Page extract]
Why is compression texture testing important in the food industry?
Texture is often as important as flavour in determining consumer preference.
1322
[Page extract]
Applications in industrial settings
Insertion and withdrawal testing is not limited to electrical connectors. It is used to validate the performance of:
1323
[Page extract]
Industry-specific test standards
ISO 9895 - packaging materials
ISO 9895 specifies the method for determining the compressive strength of paper and b
1324
[Page extract]
What is torque testing?
Torque testing measures the rotational force required to turn or twist an object. In packaging, it is most often applied to closures such as caps, lids and twist-top mechanisms to ensure they open and close within defined performance limits.
1325
[Page extract]
What is a three-point bend test?
A three-point bend test is a widely used method for determining the flexural properties of materials. It involves applying a load at the midpoint of a specimen supported at two points, creating a bending force.