Search results
376
Accessory
Diamant Backen für Mec154 Schraubspannkopf, 20 kN, 40 x 100 mm
Mec154-BD100
Diamant Backen (40 mm hoch x 100 mm breit) - vernickelt und bechichtet mit synthesischen Diamanten.
Öffnungsweite = 0 - 30mm.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu gewährleisten (z. B. weiche Metalle {…
377
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+Ko
MEC 240k- S50+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
378
Accessory
Wedge Grip (large), 5 kN, 5-16 UNC
432-398
The 5 kN Wedge Grip is ideal for tensile testing of flat and rigid materials, including plastics, rubber and light metals.
A spring-loaded lever ensures the serrated jaws (25mm wide x 32mm high) are easy to open for fast securing and release of samples…
379
Accessory
Diamant Backen für Mec94 Leichtes pneumatisches Spannzeug, 200 N, 25 x 50 mm
Mec94-BD50
Diamant Backen (25 mm hoch x 50 mm breit) - vernickelt und bechichtet mit synthesischen Diamanten.
Öffnungsweite = 0 - 20 mm.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu gewährleisten (z. B. weiche Metalle {…
380
Accessory
1/2" upper chuck assembly for use on Helixa sensors (3 N.m & 6 N.m only)
432-617
A standard self-centering 3-jaw chuck with key.
It has a maximum ½" (12.7 mm) opening and is connected to the Helixa torque sensor via an adaptor with female ⅜" square hole.
Used to secure a variety of test specimens for torque applications of 1.5 - 10…
381
Accessory
FINAT 9 Loop-Tack Test Fixture (lower), 200 N, QC-20
PDV13016-A
The FINAT 9 Loop Tack Test Fixture (lower) is fitted to the anvil plate of a motorised test stand.
It comprises a dedicated holder for 25mm x 30mm float glass onto which the adhesive-coated test strip is fixed according to the requirements of the FINAT…
382
Accessory
TS torque screwdriver chuck, 3/8"
432-233
A standard self-centering 3-jaw chuck with key.
It has a maximum ⅜" (10mm) opening and is connected to the ‘TS’ screwdriver via a square drive spindle. Used to secure a variety of test specimens for torque applications of 1.5 - 10 N.m
383
Accessory
Compression Plate, Self-levelling, Hardened & Ground, 175 mm, 5-16 UNC
432-352
Self-levelling compression plates are ideal for general compression testing on a range of materials and finished products. Self-levelling allows parallelism to be set for those applications where it is critical to accurately measure the deformation of a…
384
Accessory
Pyramidenbacken für Mec11-20 Scherenspannzeug, 10 kN, 25 x 100mm
Mec11-20-BP100
Pyramidenbacken (25 mm hoch x 100 mm breit) - vernickelt mit einer Oberfläche aus 1,2 mm hohen gehärteten Stahlpyramiden.
Bei Verwendung von 100 mm breiten Backen reduziert sich die Zugkraft auf 10kN.
Für flache Proben von Materialien, die einen "Biss…
385
Accessory
Pyramiden Backen für Mec227 Kleiner Schraubspannkopf, 100 N, 10 x 25 mm
Mec227-BP25
Pyramiden Backen (10 mm hoch x 25 mm breit) - vernickelt mit einer Oberfläche aus 1,2 mm hohen gehärteten Stahlpyramiden.
Öffnungsweite = 0 - 8mm.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu gewährleisten (z. B…
386
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+Ko
MEC 240k- S20+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic piston.
This…
387
Accessory
Diamant Backen für Mec240k Schraubspannkopf, 2.5 kN, 30 x 30mm
Mec240k-BD
Diamantenbacken (30 mm hoch x 30 mm breit) - vernickelt und bechichtet mit synthesischen Diamanten.
Öffnungsweite = Je nach Spannzeugtyp - siehe Datenblatt.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu…
388
Accessory
Pyramiden Backen für Keilspannzeug MecS622, Öffnungsweite 0 bis 9 mm
MecS622-BP
Pyramiden Backen (40 mm hoch x 34 mm breit) - vernickelt mit einer Oberfläche aus 1,2 mm hohen gehärteten Stahlpyramiden. Öffnungsweite = 0 - 9mm.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu gewährleisten (z. B.…
389
Accessory
U-form Pneumatic Vice Grip - Single Action, 2.5 kN, 18 mm opening, pair, QC-20 fitting
Mec240g+Ko
MEC 240g +kO (body only) :
A pair of pneumatically-operated, Single-action U-form Vice Grips with an opening of 0-18mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 70 mm diameter pneumatic…
390
Accessory
Upper Torque Fixing Table for Vortex stands
432-321
Upper Torque Fixing Table.
Offers highly versatile holding of specimens when torque testing. Fully adjustable between 10 - 78mm opening to accommodate a variety of forms.
Four rubber-coated, threaded pegs are supplied as standard which screw into…
391
Accessory
Diamant Backen für Mec154 Schraubspannkopf, 20 kN, 40 x 60 mm
Mec154-BD
Diamantenbacken (40 mm hoch x 60 mm breit) - vernickelt und bechichtet mit synthesischen Diamanten.
Öffnungsweite = 0 - 30mm.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu gewährleisten (z. B. weiche Metalle {…
392
Case study
Torque to twist out a champagne cork
Requirement
Sibel manufacture natural corks for the wine and spirits industry in the Champagne region of France. They pride themselves on working closely with their clients, taking into account their requirements and expectations for safety.
394
Case study
Vial stopper needle penetrability residual seal force and torque testing
Requirement
COVID-19 vaccines, as parenteral medications, enter the body by injection through the tissue and circulatory system.
395
[Page extract]
Mecmesin solutions for rotational shear testing
Mecmesin provides torque testing systems designed for high-precision, repeatable results in rotational shear testing.
396
[Page extract]
Equipment and procedures
A flat crush tester comprises two smooth, parallel platens, one fixed and one moving under controlled load application. The conditioned specimen is placed between the platens with flutes oriented vertically.
397
[Page extract]
How peel wheel tests are conducted
Specimen preparation – The bonded material is cut to defined dimensions, ensuring uniformity of size and adhesive application.
398
[Page extract]
What is a three-point bend test?
A three-point bend test is a widely used method for determining the flexural properties of materials. It involves applying a load at the midpoint of a specimen supported at two points, creating a bending force.
399
[Page extract]
Introduction to tension and compression testing
Tension and compression testing are among the most widely used mechanical testing methods for evaluating how a material or component performs under applied loads.
400
[Page extract]
How shear testing works
Food shear testing replicates cutting or slicing actions. A blade or fixture is passed through a sample while the force required is recorded. The process generally includes: