Search results
351
Accessory
Pyramiden Backen für Mec154 Schraubspannkopf, 20 kN, 40 x 60 mm
Mec154-BP
Pyramiden Backen (40 mm hoch x 60 mm breit) - vernickelt mit einer Oberfläche aus 1,2 mm hohen gehärteten Stahlpyramiden.
Öffnungsweite = 0-13mm.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu gewährleisten (z. B…
352
Accessory
Floating Peel Jig (ISO 10373-1), 500 N, 10-32 UNF
432-413
The Floating Peel Jig is used to test the peel strength between adhesive layers of flat, rigid samples such as credit cards.
A portion of the top layer is placed between the rollers and held in an upper grip (order separately). As load is applied the…
353
Accessory
Pyramiden Backen für Mec94 Leichtes pneumatisches Spannzeug, 200 N, 25 x 50 mm
Mec94-BP50
Pyramiden Backen (25 mm hoch x 50 mm breit) - vernickelt mit einer Oberfläche aus 1,2 mm hohen gehärteten Stahlpyramiden.
Öffnungsweite = 0 - 20mm.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu gewährleisten (z…
354
Accessory
Cable Cam grip for CrimpTest-1 kN
432-660
Cable Cam Grip for CrimpTest-1 Tester (supplied as standard with the Tester)
The Cable Cam Grip is designed for holding insulated cables and wire when tensile testing the pull strength of terminals up to 1 kN.
The cable is secured by the serrated cam,…
355
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+Ko
MEC 240k +kO (body only) :
A pair of pneumatically-operated, Single-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
356
Accessory
Eccentric Roller Grip - Smooth roller against rubber base, 1 kN, QC-20 fitting
Mec7-1-SR
MEC7-1-SR Eccentric Cam Grip
Fitted with a smooth-faced 50mm wide roller cam and a rubber-coating on the contact face of the grip body. As a load is applied to a specimen the cam self-tightens, spreading the load evenly. Used for specimens where a…
357
Accessory
3-Point Bend Jig, 1 kN, Aluminium, T-slot base
432-248
A lightweight 3-point Bend Jig with 60 mm high upper and lower anvils of 1.5mm radius. Has a support span up to 120 mm.
Ideal for most low-force bending and snapping applications.
For use with T-slot base plate (432-294) - sold separately - to fit…
358
Accessory
AFG / BFG zu PC-Eingabewerkzeug
432-234
Das PC Input Tool ermöglicht die Übertragung einer einzelnen Messung von einem digitalen Messgerät direkt in Microsoft Excel.
Es erfordert die Verwendung des entsprechenden Schnittstellenkabels:
* für AFG / AFTI / Tornado verwenden Sie Kabel 351-058
*…
359
Accessory
Pyramidenbacken für Mec11-5 Scherenspannzeug, 5kN, 20 x 50mm
Mec11-5-BP
Pyramidenbacken (20 mm hoch x 50 mm breit) - vernickelt mit einer Oberfläche aus 1,2 mm hohen gehärteten Stahlpyramiden.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu gewährleisten (z. B. weiche Metalle {Aluminium…
360
Accessory
U-Form Pneumatic Vice Grip - Double Action, 2.5 kN, 18 mm opening, pair, QC-20 fitting
Mec240g+2Ko
MEC 240g +2kO (body only) :
A pair of pneumatically-operated, Double-action U-form Vice Grips with an opening of 0-18mm depending on the jaw types selected (sold separately).
Each grip is fitted with 2 x 70 mm diameter pneumatic pistons, which allow…
361
Accessory
Diamant Backen für Mec240g Schraubspannkopf - U-formig, 5 kN, 30 x 50mm
Mec240g-BD
Diamantenbacken (30 mm hoch x 50 mm breit) - vernickelt und bechichtet mit synthesischen Diamanten.
Öffnungsweite = Je nach Spannzeugtyp - siehe Datenblatt.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu…
362
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 30 mm opening, pair, QC-20 fitting
Mec240k-S30+2Ko
MEC 240k- S30+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-30mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
363
Accessory
Diamant Backen für Mec240k Schraubspannkopf, 2.5 kN, 30 x 100mm
Mec240k-BD100
Diamantenbacken (30 mm hoch x 100 mm breit) - vernickelt und bechichtet mit synthesischen Diamanten.
Öffnungsweite = Je nach Spannzeugtyp - siehe Datenblatt.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu…
364
Accessory
Cone Point - 8 mm diameter, 500 N, 10-32 UNF
432-358
A Cone Point probe of Ø 8mm with angle of 60°.
For compression testing of various components or materials up to 500 N.
Typically used where compressive force needs to be applied at a point or for penetration into a material over a short distance.…
365
Accessory
Diamant Backen für Mec154 Schraubspannkopf, 20 kN, 40 x 100 mm
Mec154-BD100
Diamant Backen (40 mm hoch x 100 mm breit) - vernickelt und bechichtet mit synthesischen Diamanten.
Öffnungsweite = 0 - 30mm.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu gewährleisten (z. B. weiche Metalle {…
366
Accessory
Cable Cam Grip (smooth), 1 kN, 10-32 UNF
432-404
Cable Cam Grip - smooth, small
Designed for holding insulated cables and wire. The specimen is secured by the cam, which self-tightens as load is applied and spreads the load evenly.
Smooth cams are preferable for materials where a serrated cam may bite…
367
Accessory
Pyramiden Backen für Mec94 Leichtes pneumatisches Spannzeug, 200 N, 25 x 25 mm
Mec94-BP25
Pyramiden Backen (25 mm hoch x 25 mm breit) - vernickelt mit einer Oberfläche aus 1,2 mm hohen gehärteten Stahlpyramiden.
Öffnungsweite = 0 - 20mm.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu gewährleisten (z.…
368
Accessory
Co-efficient of Friction (COF) Sled for ASTM D1894 and ISO 8295, 200g (foam), FPT-H1
432-633
A neoprene-faced sled with magnetic grips, for testing coefficient of friction of paper samples to TAPPI T549. Supplied with rigid and extensible links.
For use on the FPT-H1 Friction Tester.
369
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+2Ko
MEC 240k +2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
370
Accessory
Custom-made Safety Guards and Enclosures
PDVguard
Where the standard safety guard does not fulfil your application requirements, Mecmesin can work with you to design and produce a custom-made safety guard to meet your exact requirements. Suitable for any Mecmesin test stand. Previously-designed guards…
371
Accessory
Eccentric Roller Grip - pyramid (serrated) roller, 1 kN, QC-20 fitting
Mec7-1
MEC7-1 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 50mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
372
Accessory
Mandrel Peg Drive, 54 mm
PDV15094-A
This fixture is connected to the torque sensor of the Vortex or Helixa. It has 4 metal pegs with an internal opening of 54 mm into which the single-form mandrel can be positioned. The pegs drive the mandrel and thereby apply the tightening and release…
373
Accessory
Digital gauge to PC input tool
432-234
The PC Input Tool allows transmission of a single reading from a digital gauge directly into Microsoft Excel.
It requires the use of the relevant interface cable:
* for AFG/AFTI/Tornado use cable 351-058,
* for BFG/Orbis use cable 351-055.
For use…
374
Accessory
Lever-operated Cam Grip (small serrated), 500 N, 10-32 UNF
432-383
The small Lever-operated Cam Grip is designed with a plated 30mm wide roller cam to self-tighten as a load is applied to a sample, spreading the load evenly. The lever also allows for quick insertion and release of samples.
Fitted with a 10-32 UNF female…
375
Accessory
Runde Backen mit Pyramidenprofil für Mec11-20 Scherenspannzeug, 20 kN, Ø 25 x 52mm
Mec11-20-BPR
Pyramidenprofil auf runde Backen (Ø 25 x 52 mm breit) - vernickelt mit einer Oberfläche aus 1,2 mm hohen gehärteten Stahlpyramiden.
Für runde Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu gewährleisten (z. B. weiche Metalle…