Search results
1301
Accessory
Pin Chuck, 100 N, M6
432-214
Pin chucks are specifically designed for gripping circular or rod-type specimens of diameters between 0.5 - 3.5mm.
For tension and compression testing below 100N.
Fitted with adaptor having M6 female threaded hole & M6 grub-screw
1302
Accessory
Large Pinch Grip, 500 N, M6
432-278
The Large Pinch Grip is fitted with 10mm high x 25mm wide cross-hatch jaw faces to ensure samples are held securely for tensile tests below 500 N.
One jaw is fixed and the other jaw is on a spring-loaded hinge which opens to 15mm. Fast installation and…
1303
Accessory
Inverted Chisel Point, Ø 12 mm, 5 kN, 5-16 UNC
432-357
For compression testing of cylindrical or wire specimens up to 5 kN.
Specimen is located centrally within the inverted V-shape and compressed to a set distance or a break.
Fitted with a 5-16 UNC female thread for connection to loadcell
1304
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 30 mm opening, pair, QC-20 fitting
Mec240k-S30+2Ko
MEC 240k- S30+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-30mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
1305
Accessory
FPT-H1 loadcell calibration checking kit
432-635
For checking the calibration accuracy of loadcell type HILC used on the FPT-H1 Friction-Peel-Tear Tester.
Comprises a fixing plate with pulley, bench clamp and cord.
For use with Lightweight hanger and masses (part numbers 432-655 and 432-656).
1306
Accessory
Cable Cam Grip (large serrated), 5 kN, M10 or M12
432-108
Designed for holding insulated cables and wire. The sample is secured by the serrated cam, which self-tightens as load is applied and minimises the chance of sample slippage.
The grip body features a clearance hole and is supplied with an M10 and M12…
1307
Accessory
VFG/VFTI RS232 interface cable: 10-way Hirose socket to USB-A
351-109
VFG/VFTI RS232 interface cable for transmitting data in RS232 format
Comprises 10-way Hirose socket (F) to USB-A connectors
1308
Accessory
Schraubspannkopf - U-förmig doppeltwirkend, 5 kN, Öffnungsweite 100 mm, Schnellwechsel-Befestigung QC-20
Mec240g-S100
Mec 240g-S100 (nur Korpus):
Ein U-Form Schraubspannkopf mit doppeltwirkender Konstruktion ermöglicht die freie Einstellung der beiden Backen, so dass sie um die Mittelachse ausgerichtet werden können, um Zugversuche an symmetrischen und asymmetrischen…
1309
Case study
Prüfsysteme für Kfz-Schaltgeräte
Anforderung
Die Zulieferer elektrischer Systeme für Automobilhersteller müssen umfangreiche Qualitäts- und Leistungsstandards erfüllen, um als erstklassige Anbieter bestehen zu können.
1310
Case study
Zugfestigkeitsprüfung des Fischernetzes nach ISO1806
Anforderung Fischernetze sind eines der Schlüsselinstrumente in der kommerziellen Fischerei, und es gibt viele Arten von aktiven und passiven Fanggeräten.
1311
[Page extract]
Interpreting breakaway test results
Understanding test outputs is as crucial as conducting the tests themselves.
Slip torque vs bridge torque
Slip torque reflects the resistance encountered before rotation begins—a measure of seal integrity and usability.
1312
[Page extract]
Standards and compliance
ASTM D2063 defines methods for determining application and r
1313
[Page extract]
Understanding ASTM D2718 standards
The ASTM D2718 standard sets out the procedures for conducting planar shear tests on structural panels using the
1314
[Page extract]
Understanding reverse ratchet torque
Reverse ratchet torque testing is an essential process for verifying the safety and reliability of child-resistant closures (CRCs).
1315
[Page extract]
Introduction to flexural testing
Flexural testing is a core method in materials science, used to evaluate how materials perform when subjected to bending stresses.
1316
[Page extract]
How running torque is measured
Running torque is typically measured using precision torque sensors mounted within a controlled test stand. The component under test is rotated at a defined speed, and torque is measured continuously during motion.
1317
[Page extract]
Test setup and equipment
Performing lap shear testing under compression requires careful alignment and use of appropriate fixtures to prevent torsion or uneven load distribution.
1318
[Page extract]
What is four-point bend testing?
Four-point bend testing determines a material’s flexural strength and stiffness by applying force at two points between two supports.
1319
[Page extract]
Introduction to five-point bend testing
The five-point bend test is a specialised method for assessing the mechanical performance of structural panels, particularly their resistance to planar shear forces.
1320
[Page extract]
Case studies in puncture resistance testing
Protective clothing - A glove manufacturer used high-force puncture testing to optimise material layering, achieving compliance with ASTM F1342 and ISO 13996 while maintaining f
1322
[Page extract]
Puncture and shear testing techniques and equipment
Testing involves applying a force to a clamped specimen until the material fails, with the method determined by the applicable standard.
1323
[Page extract]
Introduction to extrusion testing
Extrusion testing is an essential method in the food industry for measuring the texture and flow behaviour of semi-solid and visc
1324
[Page extract]
What is the Concora crush test?
Definition and overview
The Concora Crush Test (CCT) is a standardised method used to measure the crush strength of corrugated medium, specifically the fluted inner layer of corrugated board.
1325
[Page extract]
Introduction to strip method tensile testing
Among the range of tensile testing techniques, the strip method is widely recognised for its accuracy and repeatability.