Search results
1276
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+Ko
MEC 240k- S50+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
1277
Accessory
Crush Test Fixture with Precision Guide
PSV21062
Precise alignment of the upper compression plate with the test piece is essential for optimum accuracy of results. Mecmesin recommends a minimum of self-adjusting compression plates and, for ECT and RCT tests, the Crush Test Fixture featuring a Precision…
1278
Accessory
Double Cam Grip (small serrated), 500 N, 10-32 UNF
432-387
The Small Double Cam Grip is designed for holding components into which the serrated faces can bite into the material and secure tightly eg. insulated cables and wire.
The specimen is secured between the 2 cams, which self-tighten as a load is applied…
1279
Accessory
Interface cable RS232, 9-pin D-type plug to USB-A
432-450
A 9-pin RS232 male D-connector to USB-A connector. For use with VTG Tornado.
Also suitable for connecting to 'old' gauge cables which have 9-pin RS232 female D-connectors. Fits to part numbers 351-059, 351-054, 351-040 and 351-051.
1280
Accessory
Extension Rod, 130 mm, 500N, 10-32 UNF
432-117
Extension rod 130mm long supplied with locking nut to ensure alignment of grip. Comprises 10-32 UNF female to 10-32 UNF male threads.
Suitable for use with digital force gauges made from 1990 - 2006.
1281
Accessory
Popper Cam Base, 1 kN, 10-32 UNF
432-179
The Popper Cam Base is used to secure the fabric when testing the strength of press studs ('poppers'), particularly on children’s clothing.
It is secured to the base of the test stand and the popper is fed through the retaining hole and positioned over…
1282
Accessory
Automated Syringe Batch Tester
PDV19179
The Automated Syringe Batch tester is a bench-top system for checking the ‘break-loose’ and ‘glide force’ of up to 12 individual syringes in one ‘load-and-run’ cycle. In the face of increased demand on production of syringes, this system enables larger…
1283
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+2Ko
MEC 240k +2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
1284
Accessory
Peg Hook, 50 N, 10-32 UNF
432-399
The Peg Hook is fitted with 10-32 UNF female thread and supplied with a male grub-screw. It is designed for use in low-load applications where a small 'eyelet' needs to be held. The angled peg is ideal for quick and easy securing of the eyelet.
1285
Accessory
Interface cable, AFG/AFTI to MultiTest-dV, Stand reverse & RS232
351-103
Interface cable, AFG to MultiTest-dV (May 2020 - now) test stands & Vortex-dV (June 2020 -now) for stand reverse and RS232 data transfer to stand for onward use with VectorPro-Lite software.
Comprises a 15-pin D-socket to 15-pin D-plug.
1286
Accessory
Spring-loaded Pinch Grip with Chain Link, 10 N, QC-20 fitting
MecS205k
A Spring-loaded Pinch Grip designed for small-area contact (10mm x 10mm) to grip a delicate sample.
The sprung-loaded adjustable screw-mechanism allows an opening up to 3.4mm and acts in a pincer motion to secure specimens.
Fitted with a flexible chain…
1287
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+2Ko
MEC 240k- S50+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
1288
Accessory
Extension Rod with nut, 30 mm, 500N, 10-32 UNF
432-116
Extension rod 30mm long supplied with locking nut to ensure alignment of grip. Comprises 10-32 UNF female to 10-32 UNF male threads.
Suitable for use with digital force gauges made from 1990 - 2006.
1289
Accessory
V-jaw vice clamp, four jaws on screw-action adjuster, QC-20 fitting
432-678
432-678 is a vice fixture for mounting to the base of a test stand when performing tension and compression tests. It has four jaws, with two jaws being vertically spaced on either side. This provides increased stability by clamping at alternate heights on…
1290
Accessory
Mettler Toledo RS-P26 printer (US)
432-516
A basic ticket printer with simple statistical analysis manufactured by Mettler Toledo.
Communicates with Mecmesin force gauges via RS232 serial link - order interface cable separately.
Supplied with mains-power adaptor 110V with plug (2-pin flat)
Uses…
1291
Accessory
Spring-loaded Pinch Grip with Chain Link, 10 N, QC-20 fitting
MecS205k
A Spring-loaded Pinch Grip designed for small-area contact (10mm x 10mm) to grip a delicate sample.
The sprung-loaded adjustable screw-mechanism allows an opening up to 3.4mm and acts in a pincer motion to secure specimens.
Fitted with a flexible chain…
1292
Product
Automatisches Drehmomentmesssystem für Flaschenverschlüsse
ABC-t
Der ABC-t ist ein automatisches Flaschenverschluss-Drehmomentprüfsystem zur Messung des Anfangsschlupfes und des Brückendrehmoments einer vollständigen Charge von ROPP-Verschlüssen (Roll-on-Pilfer-Proof).
Automatisierte Chargentests von…
1293
Accessory
3-Jaw Popper Pull-off Fixture, 500 N, 10-32 UNF
432-409
The 3-Jaw Popper Pull-Off Fixture is supplied fitted to a short chain link assembly having a 10-32 UNF female thread. It is used for to securely holding 13-15 ligne press-studs ('poppers') when carrying out pull-off "test-to-failure" tests.
Typically…
1294
Accessory
Clevis Grip (Large) c/w quick-release pin, 5 kN, M12
432-443
Large Clevis Grip c/w quick-release pin.Fitted with female M12 thread.
Used for testing heavy duty tension springs and securing odd-shaped parts when testing tensile forces below 5 kN.
1295
Accessory
Schraubspannkopf - U-förmig doppeltwirkend, 5 kN, Öffnungsweite 50 mm, Schnellwechsel-Befestigung QC-20
Mec240g-S50
Mec 240g-S50 (nur Korpus):
Ein U-Form Schraubspannkopf mit doppeltwirkender Konstruktion ermöglicht die freie Einstellung der beiden Backen, so dass sie um die Mittelachse ausgerichtet werden können, um Zugversuche an symmetrischen und asymmetrischen…
1296
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 30 mm opening, pair, QC-20 fitting
Mec240k-S30+Ko
MEC 240k- S30+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-30mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter…
1297
Accessory
Pin Chuck, 100 N, 10-32 UNF
432-382
Pin chucks are specifically designed for gripping circular or rod-type specimens of diameters between 0.5 - 3.5mm.
For tension and compression testing below 100N.
Fitted with adaptor having 10-32 UNF female threaded hole & 10-32 UNF grub-screw
1298
Accessory
Cable Cam Grip (large serrated), 5 kN, M10 or M12
432-108
Designed for holding insulated cables and wire. The sample is secured by the serrated cam, which self-tightens as load is applied and minimises the chance of sample slippage.
The grip body features a clearance hole and is supplied with an M10 and M12…
1299
Accessory
VFG/VFTI RS232 interface cable: 10-way Hirose socket to USB-A
351-109
VFG/VFTI RS232 interface cable for transmitting data in RS232 format
Comprises 10-way Hirose socket (F) to USB-A connectors
1300
Accessory
FPT-H1 loadcell calibration checking kit
432-635
For checking the calibration accuracy of loadcell type HILC used on the FPT-H1 Friction-Peel-Tear Tester.
Comprises a fixing plate with pulley, bench clamp and cord.
For use with Lightweight hanger and masses (part numbers 432-655 and 432-656).