Search results
1301
Accessory
Cone Probe, perspex, 45 degrees, M3
432-081
A perspex conical probe with 45° angle. Cone penetrometry is traditionally used within cosmetics and food products to assess hardness and spreadability. Also applicable for testing biscuits and other similar brittle products. Commonly used with extension…
1302
Accessory
Test Hook (medium), 500 N, 10-32 UNF
432-120
Medium Fixed Hook fitted with 10-32 UNF female thread. Used for general purpose tension tests.
1303
Accessory
Popper Cam Base, 1 kN, 10-32 UNF
432-179
The Popper Cam Base is used to secure the fabric when testing the strength of press studs ('poppers'), particularly on children’s clothing.
It is secured to the base of the test stand and the popper is fed through the retaining hole and positioned over…
1304
Accessory
Radiused Probe - 8 mm, 500 N, 10-32 UNF
432-354
Radiused Probes are used to perform penetration or puncture tests on a wide range of products.
Aspects measured include firmness and ripeness of cosmetics, medical gels and foodstuffs.
6mm diameter at the tip rising to 8mm outer diameter of the probe.…
1305
Accessory
Fabric Grip, 200 N, 10-32 UNF
432-386
Fabric grips are designed for tensile and elongation testing of fabric and thin materials below 200N.
Material is gripped between two smooth spring-loaded faces which are clamped together by two locking nuts at either side of the grip to ensure the…
1306
Accessory
Multi-Jaw Grip, 500 N, 10-32 UNF
432-420
Used in tension tests the Multi-Jaw Grip is for holding round and irregularly shaped specimens by clamping on the outer surface or under a 'head'.
By turning the body of the grip the claw-type jaws can be opened and closed to get a secure grasp on a…
1307
Product
Falling dart impact testers
MEC-FD range
MEC-FD1
The Mecmesin MEC-FD Falling Dart Impact Tester range is designed to measure the impact resistance or toughness of plastic films in compliance with ASTM D1709 and ISO 7765-1 free-falling dart Methods A and B.
Dart and weight accessories required…
1308
Accessory
Adapter, 500N, M6 to M6, F to F
432-334
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1309
Accessory
MultiTest 2.5 bellows assembly (500 mm)
432-471
Optional bellows for the MultiTest 2.5 range of single-column test stands. Used to protect against dust and particle ingress and splash into the column.
Note that fitting of bellows reduces throat depth on test stand by 18mm.
Order with a MultiTest 2.5…
1310
Accessory
Schraubspannkopf - U-förmig doppeltwirkend, 5 kN, Öffnungsweite 24mm, Schnellwechsel-Befestigung QC-20
Mec240g
Mec 240g (nur Korpus):
Ein U-Form Schraubspannkopf mit doppeltwirkender Konstruktion ermöglicht die freie Einstellung der beiden Backen, so dass sie um die Mittelachse ausgerichtet werden können, um Zugversuche an symmetrischen und asymmetrischen Proben…
1311
Accessory
Interface cable, BFG (2003 - now), Orbis Mk1 (2003-2007), RS232
351-054
Connects the BFG or Orbis Mk1 to a PC for RS232 data comms.
15-pin male to 9-pin female D-connectors.
1312
Accessory
Interface cable, CFG+, RS232 Jack plug to 9-pin D-type socket
351-077
Connects the CFG+ to a PC for RS232 data transfer. Comprises 2.5 mm jack plug to 9-pin female D-connector.
1313
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+Ko
MEC 240k- S20+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic piston.
This…
1314
Accessory
Assisted Pull-Peel Table 90 Degree, 500 N
432-051
The Assisted Pull-Peel table is fitted to the anvil plate of a motorised test stand and then connected to the crosshead of a test stand. It is commonly used for conducting peel tests on adhesive tapes and films.
The carriage of the peel table is directly…
1315
Accessory
Wood Shear Test Jig, 25 kN, QC-20 or QC-32 fitting
Mec17
Wood Shear Tester DIN 52367, with torque-free shearing for wood samples according to ISO 6238, EN 392 and for glued laminated timber to BS 373. ASTM D143 version also available.
Connects to test stand and loadcell via QC 20mm or 32mm fixings. Please…
1316
Accessory
Fabric Grip, 100 N, 10-32 UNF
432-384
Fabric grips are designed for tensile and elongation testing of fabric and thin materials below 100N.
Material is gripped between two smooth spring-loaded faces which are clamped together by two locking nuts at either side of the grip to ensure the…
1317
Accessory
Pinch Grip, 2 kN, QC-20 fitting
MecS470
The 2 KN Pinch Grip is fitted with 25mm high x 25mm wide pyramid jaw faces to ensure samples are held securely for tensile tests below 2 kN.
One jaw is fixed and the other jaw is on a spring-loaded hinge which opens to 10mm. Fast installation and…
1318
Accessory
Small Parallel Grip, 500 N, 10-32 UNF
432-394
Small Parallel Grips are designed for tensile testing of small flat components and materials below 500N.
A floating ball screw attachment ensures central loading during tensile testing and wing screws are used to quickly position the jaws.
Jaw faces…
1319
Accessory
Compression Plate, Nickel-Plated, 50 mm, 5-16 UNC
432-344
50mm nickel-plated compression plate featuring concentric circles for helping operators to place samples centrally.
Fitted with 5-16 UNC female thread.
Nickel-plated compression plates are resistant to rusting.
1320
Accessory
Adapter, 500N, 10-32 UNF to M6, F to F
432-417
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1321
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+Ko
MEC 240k +kO (body only) :
A pair of pneumatically-operated, Single-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
1322
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+Ko
MEC 240k- S50+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic…
1323
Accessory
Interface cable, VTG Tornado/MultiTest-d/Vortex-d, RS232
351-051
Connects VTG Tornado, MultiTest-d or Vortex-d to a PC for RS232 data comms to VectorPro Lite software or to a serial printer.
Comprises 9-pin male to 9-pin female D connector.
1324
Accessory
Crush Test Fixture with Precision Guide
PSV21062
Precise alignment of the upper compression plate with the test piece is essential for optimum accuracy of results. Mecmesin recommends a minimum of self-adjusting compression plates and, for ECT and RCT tests, the Crush Test Fixture featuring a Precision…
1325
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+2Ko
MEC 240k- S20+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow the test specimen…