Search results
1501
[Page extract]
BS EN ISO 844
ISO 844 specifies a method of determining a) the compressive strength and corresponding relative deformation, or b) the compressive stress at 10 % relative deformation, and c) when desired, the compressive modulus of rigid cellular plastics.
1502
Event
Webinar: Essentials of Adhesion/Peel strength testing
There is a reason people reach for duct tape as a fix for almost everything – adhesion strength.
1503
Case study
Clothing button pull-off TTF test
Requirement
The customer was a supplier to major UK clothing retailer Marks & Spencer, who stipulate that all fasteners and attachments must be tested to failure.
1504
[Page extract]
Measurement and testing methods
Techniques for measuring tangent modulus
Tangent modulus is measured during tensile or compression testing, w
1505
Case study
Festigkeitsprüfung von Kinderkleidungsknöpfen
Anforderung Der Kunde war Zulieferer des großen britischen Bekleidungshändlers Marks & Spencer, der vorschreibt, dass alle Verschlüsse und Befestigungen auf Fehler getestet werden müssen.
1506
[Page extract]
ISO 34-2 standards explained
ISO 34-2 specifies the Delft tear test procedure for vulcanised or thermoplastic rubber, ensuring testing is carried out under consisten
1507
[Page extract]
Real-world applications
Plastic bottles and closures
In beverage and household product manufacturing, top-load testing is essential to confirm that bo
1508
Case study
Smoke grenade canister integrity
Customised engineering example
A manufacturer of smoke grenades required a means of testing the cap pull-off strength. The particular challenge was to grip the smooth metal cylinder for up to 5 kN of pulling force.
1509
[Page extract]
Peel test procedure - step by step
Prepare the specimen: Cut and condition according to the relevant standard.
Set up the machine: Install the correct fixture for the test type.
1510
Case study
Railcar spring testing
Requirement
Seoul Metropolitan Railway Transit Corporation required a system for testing a variety of springs in their electric railcars. The springs range in size from 3mm to 100 mm in diameter.
1511
Case study
Rotary damper gear precision torque characteristics
Requirement
A global manufacturer and distributor of component parts that are used in products across many industries including transport, beauty, consumer goods and healthcare, came to Mecmesin with a challenging torque measurement applicatio
1512
[Page extract]
ASTM F3014-14
1.1 This test method describes the procedure for penetration testing sharp and blunt needles used for the placement of surgical sutures. It only describes the test procedures (Phase 1) and does not define a test medium at this time.
1513
Case study
Triebwagenfederprüfung
Anforderung
Die Seoul Metropolitan Railway Transit Corporation benötigte ein System zum Testen einer Vielzahl von Federn in ihren elektrischen Triebwagen. Die Federn haben einen Durchmesser von 3 mm bis 100 mm.
1514
Event
Texture Testing for Bakery Applications
The primary goal for using instrumentation to measure texture is to capture an objective value to something that is typically evaluated very subjectively. Texture cannot be controlled unless it measured in a consistent and repeatable manner.
1515
[Page extract]
Key material testing standards
To ensure accuracy and comparability, elongation at break and tensile strength measurements are performed according to recognised industry standards.
1516
[Page extract]
ISBT PTC-00019
This document provides a collection of test methods for the qualification of plastic flat-top closures applied on PET bottles that are used in the beverage industry.
1517
Page
Contact support
Thank you for contacting our support team
One of our Support Engineers or your local partner will be in touch soon.
1518
[Page extract]
Introduction to climbing drum peel testing
Climbing drum peel testing is a specialised method used to measure the adhesive strength between bonded materials, particularly in flexible-to-rigid substrate combinations such as aluminium skins bonded to honeycomb cores.
1519
Case study
Adhesive test on capsulated stoppers
Requirement
A capsulated stopper (T-top, Bar-Top or Altop®) is a natural or synthetic cork stopper where the end is glued into a cap of wood, PVC, porcelain, metal, glass or other material.
1520
[Page extract]
How bridge torque is measured
Bridge torque is measured by applying rotational force to a closure until the tamper-evident bridges shear.
1521
[Page extract]
Grab method vs strip method
Compared with the strip method (as defined by ISO 13934-1), which grips the full width of the fabric, the grab method
1522
[Page extract]
Industry standards and customisation
Alignment with recognised standards
Mecmesin systems support compliance with globally recognised testing standards, including:
1523
[Page extract]
ASTM D1578
Significance and Use
Test Method D1578 for testing any spun yarn for breaking strength is considered satisfactory for acceptance testing of commercial shipments since the method has been used extensively in the trade.
1524
Product
Abrieb- und Pilling-Tester
Martindale
902-964
Martindale Abrieb- und Pilling-Tester mit TestWise Touch ™, erhältlich mit bis zu 9 Stationen und anpassbar, um eine breite Palette von Anwendungen zu testen, darunter Textilien, Socken, Leder, beschichtete Polster, Teppiche, Holz- und Hemdkragen.…
1525
[Page extract]
ASTM D2062
The method(s) in the standard along with those in Test Methods D 2051, D 2052, D 2053, D 2054, D 2057, D 2058, D 2059, D 2060, and D 2061 are a collection of proven test methods.