Search results
1251
[Page extract]
How the strip method works
The strip method involves cutting a specimen to a precise width, typically 50 mm or 25 mm depending on the applicable standard, and mounting it in the grips of a tensile testing
1252
[Page extract]
How running torque is measured
Running torque is typically measured using precision torque sensors mounted within a controlled test stand. The component under test is rotated at a defined speed, and torque is measured continuously during motion.
1253
[Page extract]
Methods for measuring coefficient of friction
The most widely adopted technique for measuring both static and kinetic coefficients of friction (COF) is the hori
1254
[Page extract]
Speak to an Expert
The Concora Crush Test, as defined in TAPPI T 824, is a critical step in corrugated medium evaluation.
1255
[Page extract]
Secant modulus testing with Mecmesin
Mecmesin testing systems such as the OmniTest and MultiTest-dV
1256
[Page extract]
Pharmaceuticals
The pharmaceutical industry is tightly controlled and subject to strict regulations, which means that testing is often at the heart of demonstrating compliance to the various international standards which govern the industry.
1257
Case study
Festigkeit von gekochtem Reis, Klebrigkeit und Adhäsionskraft
Anforderung
Die Textur von Reis ist entscheidend dafür, wie der Verbraucher die Qualität des Produkts wahrnimmt. Die Textur ist eines der sensorischen Kriterien, die für die Akzeptanz entscheidend sind.
1258
Case study
Festigkeit von gekochtem Reis, Klebrigkeit und Adhäsionskraft
Anforderung
Die Textur von Reis ist entscheidend dafür, wie der Verbraucher die Qualität des Produkts wahrnimmt. Die Textur ist eines der sensorischen Kriterien, die für die Akzeptanz entscheidend sind.
1259
Product
Korken-Extraktionsprüfgerät
CombiCork
PDV13177
Der CombiCork ist ein speziell entwickeltes Prüfgerät zur zuverlässigen und objektiven Messung des Auslösedrehmoments (und optional der Ausziehkraft) beim Herausziehen eines Korkens aus einer Sekt- oder Spirituosenflasche.
Sein innovatives Design der…
1260
Case study
Spritzenprüfung nach ISO 11040-4 Anhang G6 Abzugskraft des Nadelschutzes
Anforderung
Die allgegenwärtige medizinische Spritze ist ein äußerst wichtiges Gerät, das (parenterale) injizierbare Produkte mittels eines Zylinder- und Kolbenmechanismus an den Patienten abgibt.
1261
Accessory
Doppelhandventile (rastend) für pneumatische Klemmer
Mec205-3
Pneumatische Klemmer sind die ideale Wahl, wenn Sie Zugversuche an empfindlichen Materialien durchführen, die beim Spannen zum Rutschen oder Brechen neigen.
Mec205-3: 2 pneumatische Kipphebelventile mit Rastfunktion
Die Backen des pneumatischen…
1262
Accessory
Horizontal feet kit for 2.5 kN single-column test stand (on side)
PDV11065
Feet kit for the horizontal operation of a MultiTest motorised test.
When fitted the front panel of the test stand will be on its side for ease-of-operation by the user.
1263
Accessory
Blank (smooth) jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 25 mm
Mec94-B25
Blank Jaws (10mm high x 25mm wide) - smooth steel jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = 0 - 20 mm.
Supplied as 0.5 set = 2 jaws (left…
1264
Accessory
Split Mandrel for Stelvin aluminium closure, pneumatic
PDV14181
Suitable for Stelvin aluminium closures.
Pneumatically-operated chuck complete with half-round jaws with wire-eroded faces, for use with Vortex Upper Fixing Plate (432-321). Supplied with pneumatic valves and tubes.
Specify closure diameter when…
1265
Accessory
QC Type F Loadcell Mounting Plate, 25 mm slot c/w M12 bolt for 2.5 kN, 5 kN and 10 kN S-beam loadcells
432-287
QC Type F Loadcell Mounting Plate c/w M12 bolt.
Fitted with 25 mm slot to suit 2500N - 10kN S-beam loadcells. The M12 bolt is used to secure the mounting plate onto the loadcell so that a QC type C Male Post (432-284) can be affixed to the loadcell.
1266
Accessory
Lightweight hanger and 50 N slotted mass for verifying FPT 100 N
432-656
A lightweight hanger and an M1 slotted mass of 50N.
For use with the FPT-H1 loadcell calibration checking kit (432-635) to verify the accuracy of HILC 100 N loadcells.
1267
Accessory
Lightweight hanger and 5 N slotted mass for verifying FPT 10 N
432-655
A lightweight hanger and an M1 slotted mass of 5N.
For use with the FPT-H1 loadcell calibration checking kit (432-635) to verify the accuracy of HILC 10 N loadcells.
1268
Accessory
Horizontal feet kit for 2.5 kN single-column test stand (on side)
PDV11065
Feet kit for the horizontal operation of a MultiTest motorised test.
When fitted the front panel of the test stand will be on its side for ease-of-operation by the user.
1269
Accessory
Blank (smooth) jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 50 mm
Mec94-B50
Blank Jaws (25mm high x 50mm wide) - smooth steel jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = 0 - 20 mm.
Supplied as 0.5 set = 2 jaws (left…
1270
Accessory
Split Mandrel for Stelvin aluminium closure, pneumatic
PDV14181
Suitable for Stelvin aluminium closures.
Pneumatically-operated chuck complete with half-round jaws with wire-eroded faces, for use with Vortex Upper Fixing Plate (432-321). Supplied with pneumatic valves and tubes.
Specify closure diameter when…
1271
Accessory
Halterungskit für digitalem Messschieber an manuellem Prüfstand LCP/S
432-159
Halterungskit.
Wird zur Montage einer digitalen Mitutoyo ABS-Messschieber an den hebelbetätigten manuellen Prüfstand Modell LCP/S verwendet.
Nota: ABS-Messschieber nicht im Lieferumfang.
1272
Accessory
Height Scale Bracket Kit for LCP/S Test Stand
432-159
Bracket Set only. Used for mounting of a Mitutoyo ABS-type Digital Height Scale to the lever-operated Manual Test Stand model LCP/S.
Note: Height-scale not included
1273
Accessory
Blank (smooth) jaws for Lightweight Pneumatic Plane Grip, 200 N, 25 x 25 mm
Mec94-B25
Blank Jaws (10mm high x 25mm wide) - smooth steel jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = 0 - 20 mm.
Supplied as 0.5 set = 2 jaws (left…
1274
Accessory
QC Type C Adapter, 20 mm M, c/w pin and M6 fixing screws
432-284
QC Male Post 20mm c/w cross-pin, locking collar…
1275
Accessory
Co-efficient of Friction (COF) Sled for ASTM D1894 and ISO 8295, 200g (foam), FPT-H1
432-633
A neoprene-faced sled with magnetic grips, for testing coefficient of friction of paper samples to TAPPI T549. Supplied with rigid and extensible links.
For use on the FPT-H1 Friction Tester.