Search results
1151
Accessory
V-profile jaws for Mec11-50 Scissor Grip, 50 kN, 10 - 48mm diameter
Mec11-50-BV10
V-Jaws (10-48mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods,
tubes).
Supplied as 0.5 set = 2 jaws…
1152
Accessory
Rubber jaws for Mec227 Lightweight Vice Grip, 100 N, 10 x 100 mm
Mec227-BG100
Rubber-faced Jaws (10mm x 100mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 4mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
1153
Accessory
Excel macro for calculating Z-value (M&S requirement)
840-215
A basic Excel macro which can present the data obtained during "test-to-failure" tests to check the security of attachments in the report-format requested by Marks & Spencer (M&S).
1154
Accessory
Blank (smooth) jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 30 mm
Mec240k-B
Blank Jaws (30mm x 30mm) - smooth steel jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = see datasheet for various spans according to the grip body selected.
Supplied as 0.5 set = 2 jaws (left…
1155
Accessory
Diamant Backen für Mec240g Schraubspannkopf - U-formig, 5 kN, 30 x 50mm
Mec240g-BD
Diamantenbacken (30 mm hoch x 50 mm breit) - vernickelt und bechichtet mit synthesischen Diamanten.
Öffnungsweite = Je nach Spannzeugtyp - siehe Datenblatt.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute Klemmen zu…
1156
Accessory
Pyramiden Backen für Mec240g Schraubspannkopf - U-formig, 5 kN, 30 x 80mm
Mec240g-BP80
Pyramiden Backen (30 mm hoch x 80 mm breit) - vernickelt mit einer Oberfläche aus 1,2 mm hohen gehärteten Stahlpyramiden.
Öffnungsweite = Je nach Spannzeugtyp - siehe Datenblatt.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein gute…
1157
Accessory
Rubber jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 50 mm
Mec227-BG50
Rubber-faced Jaws (10mm x 50mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 4mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
1158
Accessory
FINAT 2 Assisted Pull-Peel Table, 90 degrees, adjustable rails for float glass, QC-20
PDV15031
The FINAT 2 Assisted Pull-Peel table (90° Peel Test) is fitted to the anvil plate of a motorised test stand and then connected to the crosshead of a test stand. It is commonly used for conducting peel tests on adhesive tapes and films.
The carriage of…
1159
Accessory
Upper Torque Fixing Table for Vortex stands
432-321
Upper Torque Fixing Table.
Offers highly versatile holding of specimens when torque testing. Fully adjustable between 10 - 78mm opening to accommodate a variety of forms.
Four rubber-coated, threaded pegs are supplied as standard which screw into…
1160
Accessory
Blank (smooth) jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 50 mm
Mec240k-B50
Blank Jaws (30mm x 50mm) - smooth steel jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = see datasheet for various spans according to the grip body selected.
Supplied as 0.5 set = 2 jaws (left…
1161
Accessory
Bench mounting stand for 'ST' range of mid- and high-range static torque transducers
432-401
Bench mounting stand supplied with all screws used for fixing the 'ST' range of mid- and high-range Static Torque Transducers.
Also equipped with an angled fixing bracket to mount the AFTI display at a convenient viewing angle.
A clearance hole at…
1162
Accessory
V-jaws for 20 & 50kN Wedge Grip, round samples 4-16 mm
Mec243-BV16
V-Jaws (4-16mm diameter) - nickel-plated having a hardened steel surface of 1.2mm pitch teeth to create a V-shaped groove.
For round samples where flat jaws do not provide enough surface contact (e.g. wires, rods,
tubes).
Supplied as 0.5 set = 2 jaws (…
1163
Accessory
Precision Lower Fixing Table for Helixa
432-600
Precision Lower Fixing Table for Helixa.
Mounts onto the base of Helixa precision torque testers. Fitted with a precision leadscrew and sprung-loaded runners into which jaws or holding pegs can be inserted (order separately). Tighten the knob to secure…
1164
Accessory
Smooth jaws for 20 kN Scissor Grip, 10 kN, 25 x 100mm
Mec11-20-B100
Blank Jaws (25mm x 100mm) - smooth steel jaw. Allows user to machine or affix own surface. By using 100 mm width jaws tensile force is reduced to 10kN.
Supplied as 0.5 set = 2 jaws (left…
1165
Accessory
Blanke Backen für Mec240g Schraubspannkopf - U-formig, 5 kN, 30 x 80mm
Mec240g-B80
Blanke (glatte) Backen (30 mm hoch x 80 mm breit) - aus Stahl. Rohling ohne Beschichtung. Geeignet zur eigenen Weiterbearbeitung.
Öffnungsweite = Je nach Spannzeugtyp - siehe Datenblatt.
Lieferung als 0,5 Satz = 2 Backen (links und rechts). Bestellen…
1166
Accessory
Pyramiden Backen für Mec240g Schraubspannkopf - U-formig, 5 kN, 30 x 100 mm
Mec240g-BP100
Pyramiden Backen (30 mm hoch x 100 mm breit) - vernickelt mit einer Oberfläche aus 1,2 mm hohen gehärteten Stahlpyramiden.
Öffnungsweite = Je nach Spannzeugtyp - siehe Datenblatt.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein…
1167
Accessory
Rubber jaws for Mec227 Lightweight Vice Grip, 250 N, 10 x 25mm
Mec227-BG25
Rubber-faced Jaws (10mm x 25mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0 - 6mm.
For fragile samples, which may get weakened by pinching at the contact-edge of the grip. (e.g. thin films, filaments, fibres and…
1168
Accessory
sample holder for standard fixture table
432-244
Fits to the standard fixture table (432-243) and used for easy configuration and alignment of test fixtures. The small-sample holder has been designed to accommodate spherical or irregular samples. Three sizes of holding plate are supplied.
1169
Accessory
Quadratische perforierte Druckplatte aus Aluminium, 400 x 400mm, Schnellwechsel-Befestigung QC-20 oder QC-32
Mec36L-400-L6x20
MEC36L-400-L6x20:
Diese quadratische Platte aus Aluminium eignet sich für Druckprüfungen mit Probestücken aus Schaum. Mit Perforationen ausgestattet, um die Luft während des Tests freizugeben.
Lochgrösse 6 mm Ø in Abstand von 20 mm.
Abmessungen: 400 x…
1170
Accessory
Blank (smooth) jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 100 mm
Mec240k-B100
Blank Jaws (30mm x 100mm) - smooth steel jaw. Allows user to machine or affix own surface (eg. abrasive 'emery' paper).
Opening span = see datasheet for various spans according to the grip body selected.
Supplied as 0.5 set = 2 jaws (left…
1171
Accessory
Tragetasche aus Kunststoff für AFTI, S-Form Kraftmessdose, TS Drehmomentschrauber & Ladegerät
416-049
Eine mit Schaumstoff ausgekleidete Kunststofftasche für das AFTI-Display.
Hat Platz für:
AFTI-Display mit wiederaufladbaren Batterien,
Netzadapter / Ladegerät,
Smart-S-Form Kraftmesszelle,
Smart TS-Drehmomentschrauber.
1172
Accessory
1/2" Lower Chuck Assembly for use on Helixa motor spindle
432-616
A standard self-centering 3-jaw chuck with key. It has a maximum ½ " (12.7 mm) opening and is connected to the Helixa motor-drive spindle via an adaptor with quick-release grub-screw. Used to secure a variety of test specimens for torque applications of 1…
1173
Accessory
Blanke Backen für Mec240g Schraubspannkopf - U-formig, 5 kN, 30 x 100mm
Mec240g-B100
Blanke (glatte) Backen (30 mm hoch x 100 mm breit) - aus Stahl. Rohling ohne Beschichtung. Geeignet zur eigenen Weiterbearbeitung.
Öffnungsweite = Je nach Spannzeugtyp - siehe Datenblatt.
Lieferung als 0,5 Satz = 2 Backen (links und rechts). Bestellen…
1174
Accessory
Lightweight hanger and 50 N slotted mass for verifying FPT 100 N
432-656
A lightweight hanger and an M1 slotted mass of 50N.
For use with the FPT-H1 loadcell calibration checking kit (432-635) to verify the accuracy of HILC 100 N loadcells.
1175
Accessory
Pyramiden Backen für Mec240g Schraubspannkopf - U-formig, 5 kN, 30 x 50mm
Mec240g-BP
Pyramiden Backen (30 mm hoch x 50 mm breit) - vernickelt mit einer Oberfläche aus 1,2 mm hohen gehärteten Stahlpyramiden.
Öffnungsweite = Je nach Spannzeugtyp - siehe Datenblatt.
Für flache Proben von Materialien, die einen "Biss" benötigen, um ein…