Search results
551
Accessory
Eccentric Roller Grip - Pyramid (serrated) roller, 10 kN, QC-20 fitting
Mec7-10
MEC7-10 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 60mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
552
Accessory
Compression Plate - Aluminium, 10 kN, 56 mm, QC-20 fitting
Mec23-56-20-AL
MEC23-56-20-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
56mm diameter.
Fitted with the QC-20mm female connection…
553
Accessory
3- & 4-point Bend Jig, 2.5 kN, Aluminium, QC-20 fitting
Mec238
MEC238 - A small yet fully-configurable 2.5 kN Bend Jig in aluminium.
The main support beam has a bending span up to 150 mm and can bear a wide selection of interchangeable single-roller or dual-roller anvils to suit your specimen material.
A single…
554
Accessory
Compression Plate Square, Hardened Steel, 196 x 196 mm, QC-20 or QC-32 fitting
Mec36-196-St
MEC36-196-St :-
Square compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Also supplied with 4 fixing legs to support the weight of the steel plate. Suitable for hard specimens such as…
555
Accessory
Compression Plate Rectangular - Hardened Steel, 396 x 496 mm, QC-20 or QC-32 fitting
Mec36-396x496-St
MEC36-396x496-St :-
Rectangular compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Also supplied with 4 fixing legs to support the weight of the steel plate. Suitable for hard specimens…
556
Accessory
Wave jaws for Mec11-20 Scissor Grip, 10 kN, 25 x 100 mm
Mec11-20-BW100
Wave Jaws (25mm x 100mm) - nickel-plated having a hardened steel surface of 5mm tall waves. By using 100 mm width jaws tensile force is reduced to 10kN.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g.…
557
Accessory
U-Form Vice Grip - Double Action, 5 kN, 106 mm opening , QC-20 fitting
Mec240g-S100
MEC 240g-S100 (body only):
A U-form Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
The ‘U-Form’ cut into the…
558
Accessory
Charger for touchscreen digital gauges, UK, USB-C, 3-pin square
304-059
For use with Mecmesin touchscreen digital force and torque gauges. With 3 square pins. Commonly used in the UK.
The mains adaptor/charger is a USB-C type:
Input:100-240Vac 50/60Hz 0.6A Max
Output: 5V/3A, 9V/3A,12V/2.25A, 3V-9V/3A 9V-11V/2.45A.
559
Accessory
Mitutoyo DP-1VR Series 264-Digimatic Mini-Processor (US)
432-206
Ein handtellergroßer Drucker von Mitutoyo. Es wird verwendet, um Messdaten über digimatischem Ausgangssignal von digitalen Kraft- und Drehmomentimessgeräte zu drucken.
Führt eine statistische Analyse durch und kann zusätzlich zu komplizierteren…
560
Accessory
Pyramid jaws for Mec11-20 Scissor Grip, 10 kN, 25 x 100 mm
Mec11-20-BP100
Pyramid Jaws (25mm high x 100mm wide) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall. By using 100 mm width jaws tensile force is reduced to 10kN.
For materials which need a “bite” to secure a good grip (e.g. soft metals {…
561
Accessory
Digital Height Scale and Brackets for LCP/S Test Stand
432-162 V01
Digital Height Scale and Brackets for mounting to the lever-operated Manual Test Stand model LCP/S.
The digital display of the height-scale is fixed to the moving crosshead of the test stand so that it's displacement can be monitored. This is often…
562
Accessory
Compression Plate - Aluminium, 10 kN, 116 mm, QC-20 fitting
Mec23-116-20-AL
MEC23-116-20-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
116mm diameter.
Fitted with QC-20mm female connection…
563
Accessory
Cone Point - 8 mm diameter, 500 N, 10-32 UNF
432-358
A Cone Point probe of Ø 8mm with angle of 60°.
For compression testing of various components or materials up to 500 N.
Typically used where compressive force needs to be applied at a point or for penetration into a material over a short distance.…
564
Accessory
Charger for digital gauges, USA, 110 V/115 V, 2-pin flat
304-006
For use with Mecmesin digital force and torque gauges. 110 Volt with 2 flat pins. Commonly used in USA, Canada, Mexico and Japan.
The mains adaptor/charger is a constant-current type:
Primary circuit: 110V – 50-60Hz
Secondary circuit: 100mA constant…
565
Accessory
Compression Plate - Aluminium, 10 kN, 196 mm, QC-20 fitting
Mec23-196-20-AL
MEC23-196-20-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
196mm diameter.
Fitted with QC-20mm female connection…
566
Accessory
3-Point Bend Jig, 2.5 kN, Aluminium, base plate
432-151
432-151 :- a simple 3-point bend jig supplied as standard with a 5mm radius upper anvil (M6 female thread connection) and two adjustable lower anvils also of 5mm radius. Lower support beam is fitted to a base plate suitable for Mecmesin motorised test…
567
Accessory
Compression Plate - Aluminium, 10 kN, 296 mm, QC-20 fitting
Mec23-296-20-AL
MEC23-296-20-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
296mm diameter.
Fitted with QC-20mm female connection…
568
Accessory
Adapter, 5 kN, 5-16 UNC to 5-16 UNC, F to F
432-293
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
569
Accessory
Compression Plate - Aluminium, 10 kN, 56 mm, QC-32 fitting
Mec23-56-32-AL
MEC23-56-32-AL :
Round compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
56mm diameter.
Fitted with the QC-32mm female connection…
570
Accessory
Dual Handswitches (locking type) for pneumatic grips
Mec205-3
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-3:
Locking dual handswitches open the jaws of the grip by pushing the lever and remain open after…
571
Accessory
Adapter, 500N, M6 to M6, F to F
432-334
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
572
Accessory
Clevis Grip (small), 500 N, 10-32 UNF
432-403
Small Clevis Grip fitted with female 10-32 UNF thread and supplied with male grub-screw.
Used for securing odd-shaped parts for testing tensile forces below 500N.
573
Accessory
3- & 4-point Bend Jig, 50 kN, Steel, QC-32 fitting
Mec103-cgr
MEC103 - A compact yet fully-configurable 50 kN Bend Jig in steel.
The main support beam attaches to the base of the test frame and has a bending span up to 120 mm. It can accept a wide selection of interchangeable single-roller or dual-roller anvils to…
574
Accessory
Compression Plate Rectangular, Aluminium, 125 x 250 mm, QC-20 or QC-32 fitting
Mec36-125x250-AL
MEC36-125x250-AL:
Rectangular compression plate in aluminium featuring concentric circles for helping operators to place samples centrally. Suitable for soft specimens such as cardboards, plastics etc.
Dimensions: 125 x 250mm.
Fitted with QC-20mm or…
575
Accessory
Compression Plate - Hardened Steel, 25 kN, 156 mm, QC-20 fitting
Mec23-156-20-St
MEC23-156-20-St :
Round compression plate in hardened steel featuring concentric circles for helping operators to place samples centrally. Suitable for hard specimens such as metals, hard plastics, small stones and granules.
156mm diameter.
Fitted…