Search results
1201
Case study
Filterteststation
Anforderung Die folgenden Tests wurden in einem einfach zu verwendenden System für eine Reihe von Tests an Automobilfiltern benötigt:
1202
[Page extract]
Understanding compressive and tensile forces
Insertion and withdrawal testing focuses on two key force measurements:
1203
Case study
Zugfestigkeitsprüfung des Fischernetzes nach ISO1806
Anforderung Fischernetze sind eines der Schlüsselinstrumente in der kommerziellen Fischerei, und es gibt viele Arten von aktiven und passiven Fanggeräten.
1204
Case study
Pannensicherheitsprüfung für Kinderzimmer-Spielzeugprodukte
Anforderung
Wonderstar wurde 2010 in Thailand mit dem Ziel gegründet, qualitativ hochwertige und gut designte Babyprodukte für Familien anzubieten.
1205
Accessory
Durchstossvorrichtung gemäβ EN ISO 14477, 500 N, Schnellwechsel-Befestigung QC-20
MecS511
Diese Prüfvorrichtung wurde entwickelt zur Bestimmung der Durchstoßfestigkeit für Verpackung,flexible Packstoffe gemäß DIN EN 14477.
Die Probe wird im unteren Probenhälter eingespannt, dem über eine Schnellwechsel-Adapterbohrung QC-20 an die Grundplatte…
1206
Accessory
Pneumatische einfache Schraubspannköpfe mit einseitigen Kolben, 1 kN, Paar, Schnellwechsel-Befestigung QC-20
Mec240k+Ko
MEC 240k + kO (nur Korpus)
Ein Paar Luftdruckbetriebener einfache Schraubspannköpfe mit einem einseitigen Pneumatikkolben von Durchmesser 50 mm + einem manuellen Backenhalter.
Max. Spannkraft 1 kN mit einer Öffnungsweite von 0-10 mm, je nach Art der…
1207
Accessory
Mitutoyo DP1-VR Series 264-Digimatic Mini-Processor (UK)
432-204
Ein handtellergroßer Drucker von Mitutoyo. Es wird verwendet, um Messdaten über digimatischem Ausgangssignal von digitalen Kraft- und Drehmomentimessgeräte zu drucken.
Führt eine statistische Analyse durch und kann zusätzlich zu komplizierteren…
1208
Accessory
Heavy-duty Vice Grip - Single Action, 20 kN, QC-20 fitting
Mec154-20
MEC 154-20 (body only - steel):
A Single-action Heavy-duty Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.…
1209
Accessory
Scissor Grip, 20 kN, QC-20 or QC-32 fitting
Mec11-20
MEC11-20 (Body only) :
Scissor-action grip rated to 20 kN fitted with either QC-20 or QC-32 connection.
Locking function allows the grip to remain open when inserting a specimen.
Spring tension provides enough clamping force to prevent the specimen…
1210
Accessory
Wave jaws for Mec154 Heavy-duty Vice Grip, 20kN, 40 x 100 mm
Mec154-BW100
Wave Jaws (40mm x 100mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = 0 - 30 mm.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).…
1211
Accessory
Wave jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 80 mm
Mec240k-BW80
Wave Jaws (30mm x 80mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).
Supplied as 0.5 set = 2 jaws (left…
1212
Accessory
Untere Haltervorrichtung, Vortex Prüfstände
432-320
Untere Haltervorrichtung für Drehmomentprüfungen
Sie bieten sehr vielseitige Vorrichtungs-Optionen an und sind völlig verstellbar, um Platz für eine Vielzahl von Formen zu machen.
Öffnungsweite: 10 - 190 mm
Standardmäßig werden vier Gummizapfen mit…
1213
Accessory
Footswitch regulator option
Mec205-PR
Pressure regulator to adjust the air pressure between 1-10 bar.
Useful when a different pressure is required between upper and lower pneumatic grips.
To be ordered and fitted with either Mec205-1 or Mec205-2 Footswitches.
1214
Accessory
Lever-operated Cam Grip (large serrated), 500 N, 10-32 UNF
432-047
The Large Lever-operated Cam Grip is fitted with a 10-32 UNF female thread and supplied with a male grub-screw. It is designed with a plated 70mm wide roller cam to self-tighten as a load is applied to a sample, spreading the load evenly. The lever also…
1215
Accessory
MLTE 1200 Long Travel Extensometer
432-843
The MLTE 1200 Long Travel Extensometer is designed to be used with Mecmesin test systems when running VectorPro MT materials testing software. It accurately measures strain directly from the test specimen to enable the most accurate calculation of the…
1216
Accessory
Medium Vice Grip - Single Action, 2.5 kN, 10mm opening, QC-20 fitting
Mec240k
MEC 240k (body only):
A Single-action Medium Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 2.5 kN…
1217
Accessory
Rubber jaws for Mec83 U-Form Pneumatic Vice Grip, 5 kN, 60 x 200 mm
Mec83-BG200
Rubber-faced Jaws (60mm x 200mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0-10mm, 10-20mm or 20-30mm depending on which rod and piston are fitted to the Mec83 body.
For fragile samples, which may get weakened by…
1218
Accessory
Self-levelling Compression Plate Steel - 116 mm, 50 kN, QC-32 fitting
MecS223g-116
MecS223g - 116mm diameter Self-levelling Compression Plate:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The…
1219
Accessory
FINAT Roller 2 kg zum Anpressen des selbstklebenden Materials
PSV14155
Zum Anpressen des selbstklebenden Materials an die Oberfläche der Prüfplatten sind Andruckrollen zu verwenden, die den erforderlichen Pressdruck aufbringen können und so konstruiert sind, dass Fehlbedienungen ausgeschlossen sind.
Für die Prüfung von…
1220
Accessory
Compression Plate, Vented by Holes & Cone, 50 mm, 5-16 UNC
432-348
Vented compression plates are ideal for top-load/crush testing of containers such as PET bottles.
Holes in the plate allow the passage of air to ensure that air inside the bottle is not compressed thereby falsifying the true measurement of the top-load…
1221
Accessory
Self-levelling Compression Plate Steel - 56 mm, 25 kN, QC-20 fitting
MecS223k-56
MecS223k - 56mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel…
1222
Accessory
Wave jaws for Mec240k Medium Vice Grip, 2.5 kN, 30 x 100 mm
Mec240k-BW100
Wave Jaws (30mm x 100mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
For flexible but slippy materials which need more surface contact to secure a good grip (e.g. textiles, fabrics and tissues).
Supplied as 0.5 set = 2 jaws (left…
1223
Accessory
Lower Keyless Chuck, large, round shaft, fits Vortex spindle
432-445
Lower ‘keyless’ 4-jaw Chuck (large)
Fitted with a round shaft for connection to the motor spindle of 'Vortex' motorised test stands. Supplied with 3 different sets of interchangeable jaws. Max.opening 80mm depending on jaws selected.
Used for holding…
1224
Product
Kalibriergerät für Drehmomentschlüssel
TWC
875-001
Der Kalibriergerät für Drehmomentschlüssel (TWC) ist eine einfache und kostengünstige Lösung zur Überprüfung der Einstellungen von Standard-, Knick- und Knarrenschlüsseln.
Manuell betätigt und mit einem Drehmoment von bis zu 1000 N.m im und gegen…
1225
Accessory
Scissor Grip, 50 kN, QC-32 fitting
Mec11-50
MEC11-50 (Body only) :
Scissor-action grip rated to 50 kN fitted with QC-32 connection. Locking function allows grip to remain open when inserting specimen.
Spring tension provides enough clamping force to prevent the specimen from slipping when…