Some of our customers

Featured case studies

Standards

Featured or equivalent test standards for Mecmesin solutions in this section

*corp Mastercard CQM: ID-1

Afera 5001

Self Adhesive Tapes - Measurement of Peel Adhesion from Stainless Steel or from its own Backing

ASTM C297

Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions

ASTM C393

Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure

ASTM C633

Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings

ASTM D3330

Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape

ASTM D6862-11

Standard Test Method for 90 Degree Peel Resistance of Adhesives

ASTM D6862-11

Standard Test Method for 90 Degree Peel Resistance of Adhesives

ASTM F88/F88M

Standard Test Method for Seal Strength of Flexible Barrier Materials

ASTM F88/F88M

Standard Test Method for Seal Strength of Flexible Barrier Materials

BS EN 12090

Thermal insulating products for building applications. Determination of shear behaviour

BS EN 12430

Thermal insulating products for building applications. Determination of behaviour under point load

BS EN 1607

Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces

BS EN 1608

Thermal insulating products for building applications. Determination of tensile strength parallel to faces

BS EN 28510-1

Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly. 90° peel

BS EN 310

Wood-based panels. Determination of modulus of elasticity in bending and of bending strength

BS EN 310

Wood-based panels. Determination of modulus of elasticity in bending and of bending strength

BS EN ISO 314-1

Plywood. Bonding quality. Part 1: Test methods

BS EN ISO 527-1

Plastics. Determination of tensile properties. General principles

BS EN ISO 8510-2

Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly. 180 degree peel

EN 12089

Thermal insulating products for building applications. Determination of bending behaviour

EN 826

Thermal insulating products for building applications - determination of compression behaviour

IEC 61730-2

Photovoltaic (PV) module safety qualification – Part 2: Requirements for testing

ISO 10373-1

Identification cards - Test methods - Part 1: General characteristics

ISO 29862

Self adhesive tapes - Determination of peel adhesion properties

ISO 7810

Identification cards — Physical characteristics 8.7 Peel Strength

ISO 8510-1

Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 1: 90 degree peel

TLMI L-IA2

180° peel adhesion - release liner

Further test types

Laminierte Karten