Search results
1676
Accessory
Fabric Grip, 200 N, 10-32 UNF
432-386
Fabric grips are designed for tensile and elongation testing of fabric and thin materials below 200N.
Material is gripped between two smooth spring-loaded faces which are clamped together by two locking nuts at either side of the grip to ensure the…
1677
Test Frame
Helixa test frame
Helixa test frame
A precision motorised test frame designed to apply torque from a few mN.m right up to a capacity of 6 N.m. (50 lbf.in).Its sensitivity and axial alignment make it perfectly suited for testing fine-precision components in a quality…
1678
Accessory
Parallel Jaw Grip, 500 N, 10-32 UNF
432-396
Parallel Jaw Grips are designed for tensile testing up to 500N of thin flat components and materials, which require secure gripping over an extended surface area.
Star handles allow jaw positions to be adjusted to ensure central loading during tensile…
1679
Accessory
20 kN Wedge Grip, QC-20 fitting
Mec243-20
MEC 243-20 Wedge Grip (body only):
A multipurpose self-tightening Wedge Grip with a lever arm for rapidly securing and releasing the specimen when testing.
Rated to 20 kN in tension with an opening of 0-16mm depending on the jaw types selected (sold…
1680
Accessory
Interface cable, BFG (2003 - now), Orbis Mk1 (2003-2007), RS232
351-054
Connects the BFG or Orbis Mk1 to a PC for RS232 data comms.
15-pin male to 9-pin female D-connectors.
1681
Accessory
Lightweight Vice Grip - Double Action, 100 N, Opening 0-8mm, 10-32 UNF
Mec227
MEC 227 (body only):
A Lightweight Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
Rated to 100 N in tension with an…
1682
Accessory
Interface cable, BFG or Orbis Mk 1 to PC, USB direct
351-087
Connects Orbis Mk 1 (2003-2007) or BFG (2003 - now) to a PC for data transfer. Comprises a 15-pin male D-connector to USB.
1683
Accessory
Extension Rod with thumbwheel, 30 mm, 5 kN, 5-16 UNC
432-008
30mm long Extension Rod 5-16 UNC female to 5-16 UNC male. Fitted with knurled thumbwheel for locking accessory in correct orientation.
1684
Accessory
Coefficient of Friction COF Fixture (ASTM D1894), 10-32 UNF
432-144
Designed to measure the coefficient of friction (COF) to ASTM D1894, between two pieces of material.
The COF test determines the kinetic and static resistance of one surface being dragged across another.
This friction table can be mounted to the base…
1685
Accessory
TS torque screwdriver chuck, 3/8"
432-233
A standard self-centering 3-jaw chuck with key.
It has a maximum ⅜" (10mm) opening and is connected to the ‘TS’ screwdriver via a square drive spindle. Used to secure a variety of test specimens for torque applications of 1.5 - 10 N.m
1686
Accessory
Adapter, 500 N, 10-32 UNF to 5-16 UNC, F to F
432-329
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1687
Accessory
Compression Plate, Hardened and Ground, 19 mm, 10-32 UNF
432-337
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
19mm diameter having 10-32 UNF female thread.
1688
Accessory
Crosshead Extension and Elevated Base Plate
432-406
The 38mm crosshead extension and elevated base plate are supplied together. They are used for fitting larger samples up to 200 mm diameter, to a single-column MultiTest system. When fitted, the cantilever effect of such an extension serves to reduce the…
1689
Accessory
QC Type K Adapter, 20 mm F to 5/16 UNC fixing bolt, c/w pin
432-429
QC Female Sleeve Type K c/w cross-pin with 5-16 UNC Fixing Bolt:
Converts a non-QC type grip having a 5-16 UNC fixing thread into a QC type thereby allowing for quick interchange of grips.
1690
Accessory
Sample cutter 15 mm wide
PSV13007
Sample cutter for preparing peel and tensile samples of film/paper. Adjustable blade spacing upto 70 mm, or quickly set at 15 mm or 1 inch wide with the width adjustment block.
Includes spare blades, width adjustment block and hardened protective mat on…
1691
Accessory
Fabric Grip, 100 N, 10-32 UNF
432-384
Fabric grips are designed for tensile and elongation testing of fabric and thin materials below 100N.
Material is gripped between two smooth spring-loaded faces which are clamped together by two locking nuts at either side of the grip to ensure the…
1692
Accessory
Small Parallel Grip, 500 N, 10-32 UNF
432-394
Small Parallel Grips are designed for tensile testing of small flat components and materials below 500N.
A floating ball screw attachment ensures central loading during tensile testing and wing screws are used to quickly position the jaws.
Jaw faces…
1693
Accessory
Interface cable, VTG Tornado/MultiTest-d/Vortex-d, RS232
351-051
Connects VTG Tornado, MultiTest-d or Vortex-d to a PC for RS232 data comms to VectorPro Lite software or to a serial printer.
Comprises 9-pin male to 9-pin female D connector.
1694
Accessory
Multi-Jaw Grip, 500 N, 10-32 UNF
432-420
Used in tension tests the Multi-Jaw Grip is for holding round and irregularly shaped specimens by clamping on the outer surface or under a 'head'.
By turning the body of the grip the claw-type jaws can be opened and closed to get a secure grasp on a…
1695
Accessory
Interface cable, AFG/AFTI (Orbis Mk2/Tornado), 15-pin D socket to USB-A
351-086
Connects the AFG, AFTI (2006 - now), Orbis or Tornado (2008 - now) to the USB port of a PC for data transfer by RS232.
Comprises a 15-pin female D-connector to USB-A connector.
1696
Accessory
Extension Rod with thumbwheel, 30 mm, 500N, M6 to 10-32 UNF
432-007
Extension rod 30mm long having 10-32 UNF female to M6 male threads.
Fitted with knurled thumbwheel for locking accessory in correct orientation.
1697
Accessory
Adapter, 500 N, 10-32 UNF to 10-32 UNF, F to F
432-328
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1698
Accessory
Compression Plate, Hardened and Ground,12 mm, 10-32 UNF
432-336
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
12mm diameter having 10-32 UNF female thread.
1699
Accessory
Compression Plate, Vented by Holes & Cone, 50 mm, 5-16 UNC
432-348
Vented compression plates are ideal for top-load/crush testing of containers such as PET bottles.
Holes in the plate allow the passage of air to ensure that air inside the bottle is not compressed thereby falsifying the true measurement of the top-load…
1700
Accessory
Toggle Clamps, 50 mm, serrated, 500 N, 10-32 UNF
432-176
Toggle Clamp (serrated)
An adjustable jaw can be positioned to ensure that symmetrical or asymmetrical specimens are aligned centrally. The other jaw is fitted to a toggle mechanism operated by a lever to allow rapid, easy clamping of specimens for…