Search results
1626
[Page extract]
ASTM D2344 / D2344M
ASTM D2344 is a test method, which determines the short-beam strength of high-modulus fiber-reinforced composite materials. It is applicable to all types of parallel fiber reinforced plastics and composites.
1627
[Page extract]
TAPPI T 400
This method describes procedures for obtaining a representative sample for testing.
1628
[Page extract]
ASTM E1820-18ae1
The ASTM E1820 test method covers procedures and guidelines for the determination of fracture toughness of metallic materials using the following parameters: K, J, and CTOD (δ). Toughness can be measured in the R-curve format or as a point value.
1629
[Page extract]
CETIE Guide 9
This guide applies to the screw capping of pressurised wines & other beverages for narrow necks finishes with a redrawn metallic tamper-evident closure on a "BVS type" glass finish adapted for pressure caps. Includes sections on checking load setting on
1630
[Page extract]
BS EN 14704-1
Methods for testing using stripsof fabric in straight strip form or loops, which can be used to measure elasticity and related properties of fabrics, excluding narrow fabrics.
1631
Case study
Sports shoe cleats release torque
Requirement
A leading golf shoe supplier needed to measure the release torque of the interchangeable cleats in its range of sports footwear.
1632
[Page extract]
Food & Drink
Mecmesin solutions for the food and drink sector.
We live in a world where the majority of food and drink products are supplied pre-packed in packaging that protects, but that is designed to be opened easily.
1633
Event
Medical Devices: Torque testing of Child Resistant Closures (CRC) with 21 CFR Part 11 compliance
Torque testing of Child Resistant Closures (CRC) with 21 CFR Part 11 compliance
1634
Event
Medical Device Testing: Torque testing of Child Resistant Closures (CRC) with 21 CFR Part 11 compliance
Torque testing of Child Resistant Closures (CRC) with 21 CFR Part 11 compliance
1635
[Page extract]
Shear Modulus Guide
Understanding how a material behaves under sliding or twisting forces is essential when selecting the right component for mechanical or structural performance.
1636
[Page extract]
Pharmaceuticals
The pharmaceutical industry is tightly controlled and subject to strict regulations, which means that testing is often at the heart of demonstrating compliance to the various international standards which govern the industry.
1637
Accessory
Needle Probe, stainless steel, 2 mm
432-087
The 2mm diameter needle probe is made from stainless steel and has an M3 female thread. It is designed for surface puncture and penetration tests.
Commonly used with extension rod M3 male to 10-32 UNF female ... part number 432-100
1638
Accessory
MDD Horizontal Feet Kit
432-126
Feet for the horizontal operation of an MDD manual test stand. Supplied as a pair.
1639
Accessory
Test Hook (small), 50 N, M6
432-171
Small Fixed Hook fitted with M6 female thread. Used for general purpose tension tests.
1640
Accessory
Radiused Probe - 11 mm, 500 N, 10-32 UNF
432-355
Radiused Probes are used to perform penetration or puncture tests on a wide range of products.
Aspects measured include firmness and ripeness of cosmetics, medical gels and foodstuffs.
8mm tip rising to 11mm outer diameter. Fitted with 10-32 UNF female…
1641
Accessory
Compression Plate, Hardened and Ground, 50 mm, M6
432-197
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
50mm diameter having M6 female thread.
1642
Accessory
Interface cable, AFG/AFTI (2006-now) to MultiTest-d / Vortex-d, RS232 & Control
351-074
Connects AFG/AFTI to MultiTest-d (data comms…
1643
Accessory
QC Type B Adapter, 20 mm F to M12 fixing bolt, c/w pin
432-283
QC Female Sleeve c/w cross-pin with M12 Fixing Bolt:
Converts a non-QC type grip into a QC type for quick interchange of grips. Fits to loadcells with M12 female thread (eg. ILC-S 2500N and ILC-S 5000N).
1644
Accessory
Interface cable, MultiTest-dV / Vortex-dV, USB
351-093
Interface cable connects MultiTest-dV or Vortex-dV to a PC for data-transfer to VectorPro Lite software.
Comprises USB-B to USB-A connectors.
1645
Accessory
Cone Probe, perspex, 45 degrees, M3
432-081
A perspex conical probe with 45° angle. Cone penetrometry is traditionally used within cosmetics and food products to assess hardness and spreadability. Also applicable for testing biscuits and other similar brittle products. Commonly used with extension…
1646
Accessory
Adapter, 10 kN, M10 to M12, M to M
432-335
Male-to-male Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1647
Accessory
Compression Plate, Nickel-plated, Vented by Holes & Cone, 50 mm, 10-32 UNF
432-347
Vented compression plates are ideal for top-load/crush testing of containers such as PET bottles.
Holes in the plate allow the passage of air to ensure that air inside the bottle is not compressed thereby falsifying the true measurement of the top-load…
1648
Accessory
FPT Tear Vice-Grips (pair), 100 mm rubber jaws, QC-8
432-625
A Lightweight Double-action Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile and tear testing of both symmetrical and asymmetrical specimens.
Fitted with 100mm-wide, rubber-…
1649
Accessory
Heavy-duty Vice Grip - Single Action, 10 kN, QC-20 fitting
Mec154-10
MEC 154-10 (body only - aluminium):
A Single-action Heavy-duty Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place…
1650
Accessory
Extension Rod, 130 mm with thumbwheel, 2.5 kN, 5-16 UNC
432-123
130mm long Extension Rod 5-16 UNC female to 5-16 UNC male. Fitted with knurled thumbwheel for locking accessory in correct orientation.