Mecmesin | Search results

3051

^{[Page extract]}

ASTM C364

This test method covers the compressive properties of structural sandwich construction in a direction parallel to the sandwich facing plane.

3052

^{[Page extract]}

ASTM C972

Tape sealants are tacky, deformable solids used under compression between two or more surfaces of similar or dissimilar materials in a variety of sealing applications.

3053

^{[Page extract]}

ASTM C961

This test method covers a laboratory procedure for determining the lap shear strength of sealants. It also provides information on the adhesive bond of the sealants to the tested substrates.

3054

^{[Page extract]}

ASTM C1469

This test method covers the determination of shear strength of joints in advanced ceramics at ambient temperature.

3055

^{[Page extract]}

Vice grip (Pneumatic)

Vice grips (single-action) - having one fixed jaw against which a second parallel jaw is tightened. The position of the fixed face may be adjustable to accommodate differing specimen thickness.

3057

^{[Page extract]}

These test methods determine the shear properties of structural panels associated with shear distortion of the planes parallel to the edge planes of the panels. Both shear strength and modulus of rigidity may be determined.

3058

^{[Page extract]}

ASTM D1002

This test method covers the determination of the apparent shear strengths of adhesives for bonding metals when tested on a standard single-lap-joint specimen and under specified conditions of preparation and test.

3059

^{[Page extract]}

ASTM D2339

By the nature of the way adhesives are used in two-ply wood construction, shear strength is an important performance criteria.

3060

^{[Page extract]}

ASTM D2919

This test method covers data for assessing the durability of adhesive lap-shear joints while stressed in contact with air, air in equilibrium with certain solutions, water, aqueous solutions, or other environments at various temperatures.

3061

^{[Page extract]}

ASTM D3163

ASTM D3163 is a test method used to determine the single-lap shear adhesive joints of rigid plastic adherends. The test method is useful for generating comparative shear strength data for joints made from a number of plastics.

3062

^{[Page extract]}

ASTM D3164

Test method ASTM D3164 is used to produce shear strength data for joints to compare adhesives or evaluation surface treatments. Shear joints impose uniform stresses across the bond area which results in the highest possible joint strength.

3063

^{[Page extract]}

ASTM D3165

This test method is useful in that the joint configuration closely simulates the actual joint configuration of many bonded assemblies.

3064

^{[Page extract]}

ASTM D3166

This test method covers the measurement of fatigue strength in shear by tension loading of adhesives on a standard specimen and under specified conditions of preparation, loading, and testing.

3065

^{[Page extract]}

ASTM D3359

These test methods cover procedures for assessing the adhesion of coating films to metallic substrates by applying and removing pressure-sensitive tape over cuts made in the film.

3066

^{[Page extract]}

ASTM D3518 / D3518M

ASTM D3518 is a test method, which measure the shear stress and shear strain properties of polymer matrix composite materials composed of +45 plies and -45° plies.

3067

^{[Page extract]}

ISO 37

ISO 37 specifies a method for the determination of the tensile stress-strain properties of vulcanized and thermoplastic rubbers. This test standard is equivalent to BS ISO 37.

3068

^{[Page extract]}

ASTM D3528

This test method covers the determination of the tensile shear strengths of adhesives for bonding metals when tested in an essentially peel-free standard specimen that develops adhesive stress distribution representative of that developed in a typical l

3069

^{[Page extract]}

ASTM D3983

This test method describes a method of measuring the shear modulus and rupture stress in shear of adhesives in bonded joints.

3070

^{[Page extract]}

ASTM C1292

This test method covers the determination of shear strength of continuous fiber-reinforced ceramic composites (CFCCs) at ambient temperature.

3071

^{[Page extract]}

ASTM D3931

This test method covers the determination of comparative shear properties of gap-filling adhesives in wood-to-wood joints at specified thicknesses of bondline in the dry condition, when tested on standard specimens under specified conditions of preparat

3072

^{[Page extract]}

ASTM C273/C273M

This test method is used to determine core shear properties of a sandwich construction material using loading plates bonded to the outer surfaces or skins (facesheets).

3073

^{[Page extract]}

ASTM D3846

ASTM D3486 is a test method used for evaluating the in-plane strength of reinforced thermosetting plastics in flat sheet form in thicknesses ranging from 2.54 to 6.60 mm.

3074

^{[Page extract]}

ASTM C394

This test method covers determination of the effect of repeated shear loads on sandwich core materials.

3075

^{[Page extract]}

ASTM D1876

This test method measures the peel separation strength of two flexible materials that have been bonded together.

Search results

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

[Page extract]

系统

仪器

系统

仪器

系统

仪器

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}

^{[Page extract]}